Belts - Import export

Belt back and belt teeth CR. Tension cords Glascord. Tooth covering mesh polyamide. Note Endless toothed belts with an arched profile as per ISO 13050 with metric pitch. The rounded shape of the tooth contour provides a particularly high degree of safety against incorrect tooth interlocking, combined with a very rounded tooth mesh. Operating noise is significantly reduced by the rounded tooth mesh. The toothed belts are robust, economical and versatile. Belt speed vmax perm. 50 m/s Transmissible power up to 8.42 kW Permissible speed up to 14000 rpm Lownoise and lowmaintenance Very good chemical resistance, particularly against oils, greases and fuels Accurate positioning and angles

100% leather Loop diameter 12 cm 3.5 cm Width Length 110 cm

100% leather Loop diameter 4 cm 3.5 cm Width Length 110 cm

Transfers and lifts the product from one piece of equipment to a piece of equipment at a higher level. Several flighted belt widths are available according to the capacity of the product to be transferred. Adapted to the architecture of the line and to the constraints of the building.

Endless toothed belt with trapezoidal profile to DIN 7721 T1 with metric pitch. Ideal for drives with high belt flexibility. Permits smallest pulley diameters. The toothed belts are intended for drives where precision is a requirement, safety is important and the effects of chemicals are a concern. maintenancefree highpower transmission minimal belt extension accurate positioning and angles very good chemical resistance, especially to oils, greases and fuels extremely high abrasion resistance transmits power up to 30 kW reliable speed up to 10,000 rpm

Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trapezoidal toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter.

In all cases, the mechanical fastening systems ERO Joint® are linked to a traction cord embedded in the belt in order to provide the required mechanical resistance. (ERO Joint® is also available in belts without traction cord). In such cases, a traction element is added to assure the mechanical resistance of the mechanical hinge joint. Anyway using ERO Joint® V-belts ensure you a complete freedom and a high-flexibility: no specific tool, no splicing and welding procedure to respect, no deburring, no risk to miss the welding. ERO Joint® trapezoidal belts are easy to assemble.

ADVANTAGES Advantages are a fast and easy installation and assembly. With this new solution of mechanical joint system, you will save time and optimize your production downtime by reducing the repair time. The mechanical assembly of ERO Joint® round belts is substantially better compared to another mechanical joint system. There is no other mechanical joint system in round belts with traction cord. Mechanical fastening systems ERO Joint® are lasting solutions. The ERO Joint® round belts are spliced in our production using a patented process and fitted with the length requested. Anyway using ERO Joint® round belts ensure you a complete freedom and a high-flexibility: no specific tool, no splicing and welding procedure to respect, no deburring, no risk to miss the welding. ERO Joint® round belts are easy to assemble. Alternatives Hollow round belt with fastening system Hollow round belt with connector are only used for very low mechanical resistance.

The mechanical fastening system ERO Joint® is available in conveyor belts with a thickness over 1mm. The assembly is made by threading of 3 transversal pins (stainless steel or polyacetal pins can be used). ERO Joint® splice is integrated into the conveyor belt, with no structural, width and colour changes. Tensile Kevlar cord can be embedded in Polyurethane upon request. Anyway using ERO Joint® conveyor belts ensure you a complete freedom and a high-flexibility: no specific tool, no splicing and welding procedure to respect, no deburring, no risk to miss the welding. ERO Joint® conveyor belts are easy to assemble.

ADVANTAGES Advantages are a fast and easy installation and assembly. With this new solution of mechanical fastening system, you will save time and optimize your production downtime by reducing the repair time. The mechanical joint system ERO Joint® keeps the minimal diameter of the belt and is compatible with conveyor belts scrapers. Mechanical fastening systems ERO Joint® are lasting solutions. The ERO Joint® splice shape may be adapted in order to increase the mechanical resistance. Mechanical splicing system ERO Joint® are also possible in conveyor belts with sealed tension members (like Gates PosiClean® and FlatClean FC12™) ->More about PosiClean® ERO Joint® belt The ERO Joint® conveyor belts are spliced in our production using a patented process and fitted with the length requested.

The mechanical fastening system ERO Joint® is available on pitches T10, AT10, T20, AT20, 8M, 14M for all widths over 16mm with reinforcement Steel, Kevlar or Stainless steel. (The recommended minimum diameter for pulleys is 50mm). The ERO Joint® splice is compatible with all type of coatings (Supergrip, Linatex®, PU, Sylomer®, …) and all types of guiding. ADVANTAGES Advantages are a fast and easy installation and assembly. With the pin mechanical fastening system ERO Joint®, you will optimize your production downtime by reducing the repair time. The assembly can be realized by screwing or with a tool. This tool enables the pre-tension of belt and makes pins threading easier. ERO Joint ® Ultimate version In Ultimate version, the mechanical belt fastener ERO Joint® transmits more than 50% of the power of a Flexbelt (true endless belt): Between pulleys, there is always a ½ continuous tight side to assure the mechanical resistance and the rigidity of the belt.

ADVANTAGES Advantages are a fast and easy installation and assembly. With the hinge pin mechanical fastening system ERO Joint® HP, you will optimize your production downtime by reducing the repair time. Mechanical strength and lifetime are higher than any other mechanical fastening systems. Mechanical resistance and elongation are equivalent to welded belts. TENSIONING TOOL FOR ERO JOINT® HP Alternatives Spiral seams The mechanical spiral seams system is also very easy to assemble as ERO Joint® HP but its mechanical resistance is poor. Pin Joint The mechanical Pin Joint system is more difficult to assemble than ERO Joint® HP. The mechanical resistance is also lesser than ERO Joint® HP.

In addition to providing a high quality and technology in drive solutions, Gates also provides you expertise on synchronous drive systems. The Poly Chain® GT Carbon™ is the new polyurethane synchronous belt by Gates, manufactured with patented carbon tensile cord and providing a high torque and low speed drives. Engineers from the materials development department of Gates are the pioneer in high fatigue-resisting carbon fibre tensile cord incorporated into a new polyurethane compound belt. Then the Poly Chain® GT Carbon™ is the most potent synchronous belt in the transmission world, and provide a maintenance-free, energy saving and eco-friendly operation. It is a brilliant substitute to roller chain and gear drives.

The mechanical fastening system ERO Joint® is available in flat belts with a thickness over 1mm containing an intermediate layer of Polyurethane. The assembly is made by threading of 3 transversal pins. Anyway using ERO Joint® flat belts ensure you a complete freedom and a high-flexibility: no specific tool, no splicing and welding procedure to respect, no deburring, no risk to miss the welding. ERO Joint® flat belts are easy to assemble. Advantages are a fast and easy installation and assembly. With this new lacing technology, you will save time and optimize your production downtime by reducing the repair time.

ADVANTAGES Fast and easy assembly. With the ERO Joint® SK solution, you reduce the intervention time and production downtime. The ERO Joint® SK solution is durable, with a high mechanical resistance. The minimum diameter is preserved. ERO Joint® SK for round and V-belts are easy to assemble. Alternatives Hollow round belt with fastening system Hollow round belt with connector are only used for very low mechanical resistance. Junction made on site (with tool) Belts may be spliced and welded on site by using a specific tool according to the splicing and welding procedure. With mechanical fastening system ERO Joint® you will reduce considerably costs, particularly for belts with high dimension and belts with tensile reinforcement. Thanks to this new lacing technology, production costs are significantly reduce and the downtime too.

Provides the product transfer from a piece of equipment located upstream to a piece of equipment located downstream. Can be adapted according to your needs and capacities.

Transfers and feeds the product in a piece of equipment located downstream. Adapted according to your needs and your production.

Suitable for multiple products (except for leafy vegetables).Decrease in the product temperature by several tens of degrees according to the ambient temperature. Low water consumption, respect for the product and the environment. Possibility of filtering the air intake to the cooler.

Precise control of the parameters and homogeneous processing of the product by maintaining the temperature through the entire thickness of the product layer for the time required for blanching (and even pre cooking) the processed products. High material yield by preserving as best as possible the organoleptic qualities of the processed products. Minimum water consumption according to the operating mode selected. Optimisation of the dimensions of the equipment according to the range of products to be processed and of the space constraints of the installation zone.

Saws the husked ears of corn into several pieces (1 to 3). Capacity (automatic feeding version) of 110 ears/minute with the ACC feed system of the cutter. Capacity (manual feeding version) of 60 ears/minutes with two operators. Machine primarily comprised of an automatic feed (automatic feeding version only), a roller conveyor and a cutting head with circular saws. For the two versions, an operator manages the orientation of the ears on the conveyor belt Roller conveyor for visual control and feeding the saw. Adjustment of the cutting of the ends of the ears and of the pieces for a desired length.

Installed at the inletof the line for granular products such as peas/flageolets, it removes small waste, sticky waste as well as large waste. Machine mainly consisting of a drum whose perforations in the final section are adapted to the product being treated. Continuous cleaning of the machine thanks to its system of brushes and scrapers. Exit of the products to be treated under the 3rd section of the drum. Recovery and evacuation of waste thanks to a belt conveyor placed inside the drum (except for small waste at the beginning of the machine).

Discover our range of belts for agricultural equipment: V-belts, variator belts, poly-V belts, hexagonal belts, timing belts and flat belts. To provide you with the most comprehensive range and impeccable quality, we work with the leading brands of belts: Gates, Optibelt. Our range includes almost 1,600 references, 975 of which are in stock. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming).

Discover our range of Swarther belt and many other mower parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.

Discover our range of Round baller belts and many other baler parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels