Bear it - Import export

Housing washer, shaft washer and rolling elements, bearing steel. Cage, steel. Note Axial ball bearings accept high axial loads from one direction but may not be loaded radially. The bearings are separable. This means the bearing parts can be fitted independently of each other. The main dimensions of the axial ball bearing conform to ISO 104 and DIN 711. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.

Highperformance polymer iglidur® G, iglidur® J or iglidur® X. Version iglidur® G grey; iglidur® J yellow; iglidur® X black Note Plastic highperformance polymer plain bearings. – maintenancefree – lubricantfree – corrosionresistant – resistant to dirt – high dimensional precision – high pressure resistance – good heat dissipation – very low creep tendencies – high mechanical damping – resistant to UV radiation. Assembly The bearings are designed for press fits in H7 bores. After pressing in, the ID of the bearing will be diameter D with the relative tolerance. The bearings are suitable for shafts with h tolerance (recommended min. h9).

We manufacture rough or fully machined bearing for centrifuge machine : WNr 1.4591 GX5CrNiMoNb19-11-2

We manufacture rough or fully machined bearing for hydraulic turbines in specific lead nickel bronze. Exceptional wearing and mechanical properties.

We produce seal joints and bearings for propeller shaft in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good fatigue and wear resistance High mechanical strength Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity High mechanical strength Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity High mechanical strength Good friction Excellent machinability

Can be used with different bearing housing materials, e.g. aluminium, magnesium and plastic Feasible for a larger variety of bearing housing dimensions, from thin metal sheet housings up to multiple and sectional longer housing areas Reduced total system costs with increased bearing housing tolerances, even stamped or laser burned housings are suitable Manual and automated installation possible

Adjusting bearing for misalignment equalisation All-purpose as flange or pedestal bearing, suitable for high loads Self-aligning spheric avoids edge load to the bearing Adjustable up to ± 5° Spheric is secured against distortion Depending on choice of housing, spherics and bearings, simple to most demanding bearing solutions are possible For optimum design solutions, various bearings from the GGB product programme are applicable

Adjusting bearing for misalignment equalisation All-purpose as flange (EXALIGN DF and FL) or pedestal bearing (EXALIGN PB), suitable for high loads Self-aligning spheric avoids edge load to the bearing Adjustable up to ± 5° Spheric is secured against distortion Depending on choice of housing, spherics and bearings, simple to most demanding bearing solutions are possible For optimum design solutions, various bearings from the GGB product programme are applicable

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties Suitable for use with oil lubrication High load capacity Good fatigue and wear resistance High mechanical strength Good friction Excellent machinability

Aluminium bearing alloy widely used in external gear pumps and motors High strength aluminium alloy with anti-friction and wear resistance properties High load capacity High mechanical strength High wear resistance Good machinability

Adjusting bearing for misalignment equalisation All-purpose as flanged or pedestal bearing, suitable for high loads Self-aligning spheric avoids edge load to the bearing Adjustable up to ± 5° Spheric is secured against distortion Depending on choice of housing, spherics and bearings, simple to most demanding bearing solutions are possible For optimum design solutions, various bearings from the GGB product programme are applicable

These bearing blocks permits to realize linear tables with 2 guide rods. Guided by 4 ball bushings and protected by 4 wiper seals. Quadruple bearings or bearing blocks These bearing blocks (or quadruple bearings blocks) permits to realize linear tables with 2 guide rods. Guided on 4 ball bushings and protected by 4 wiper seals. The housing is in anodized aluminium. In option, for dusty environment additionnals wipers in nitrile (/RNI) or polyurethane (/RPU). With 2 guide rods in hardened steel, you can easily make a precision linear table that will withstand significant torques and loads (according to the length of the rods). These blocks are interchangeable with the bodies of Type 306 linear tables, Type 309 trapezoidal screw tables, Type 308 ball screw tables and Type 307 pneumatic cylinder tables. They can therefore be the basis for a special execution of these products.

Manual positioning table drived by lead screw Guided by 2 rods on bronze bearings or ball bushings Precision manual tables The guidance is ensured by 2 rods on 4 calibrated bronze bearings (reduced play) or 4 ball bushings for guidance without play. The guide length of long body tables (309L/M) allows to accept large loads and torques. The axial positioning accuracy of these tables is <0.15 mm (in practice 0.02 to 0.10 mm). But the blocking in position is done on the carriage, by pressure on a guide rod, so as to remove the axial play of the nut of the trapezoidal screw after blocking. Manual crossed tables XY or YZ For the creation of XY crossed table, the tables are mounted one on the other directly by the body (long body version only) with the option 308922 * making smooth holes in the body of a table. To combine 2 tables in YZ, it is preferable to use a lifting table for the Z axis, mounted by its end on the body of the horizontal table.

Economical manual positioning table drived by leadscrew. Actuated by grip knob. Guided by 2 rods on bronze bearings. Using of economical manual tables Acting is done by a grip knob supplied with the table. Maxi stroke is 100 mm for size 0, and 200 mm for sizes 1 and 2. Any nonstandard intermediate stroke can be produced. The locking in position is done on the trapezoidal screw, either in position B1 (above the front plate) or in position B2 (at the end of the end plate) depending on the access and the space available. The position is visualized by a mechanical indicator or by ruler on the base plate. The fixing on the frame is done by the 2 end plates (laminated holes) or by the end plate in « Z axis » version for vertical applications. The positioning accuracy of economical manual tables The axial positioning accuracy of these tables is <0.20 mm (in practice 0.05 to 0.15 mm), because the axial play is largely eliminated after locking in position

These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks

Discover our range of housings for agricultural equipment: flange housings, plummer block housings, tensioner slide housings, sheet metal housings and HUb housings. To provide you with the most comprehensive range and impeccable quality, we work with the leading agricultural bearing brands: Timken, NTN, NSK and Schaeffler. Our range includes almost 300 references, 100 of which are in stock. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming).

Discover our range of bearings for agricultural equipment: ball bearings, roller bearings, cam rollers, needle bearings. To provide you with the most comprehensive range and impeccable quality, we work with the leading brands of agricultural bearings: Timken, NTN, SNR, NSK and Schaeffler. Our range includes more than 1,000 items, 450 of which are in stock. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming).

Housing igumid® G. Swivel ball iglidur® W300 Note The ability to pivot allows pillow block bearings to compensate for misalignment and possible shaft deflection. They are easy to install and suitable for the accomodation of rotating, oscillating and linear movements. igubal® pillow block bearings are maintenance free and conceived for dry running condition. Assembly These pillow block bearings are designed for mounting with 2 screws. The ID tolerance is E10. The matching shaft should have a tolerance of h6 to h9.

Steel housing. Nitrile rubber seal. Preloaded highaccuracy bearings with a 60° thrust angle. The bearings accept both radial and axial forces from both directions. Due to their preload, the angular contact ball bearings provide a high level of stiffness, excellent concentricity, precise tool positioning and repeatability. The integrated lowfriction seal effectively keeps dirt away from the bearing, thereby ensuring excellent operating safety and a long service life. The bearing friction coefficient Mrl is a reference value. The moment of inertia corresponds to that of the rotating inner ring. The limiting speeds are applicable after grease is applied. Technical data All bearings are supplied ready for mounting with lubricating grease type KE2P35 acc. to DIN 51825. Housing and shaft tolerances correspond to roundness tolerance class IT2 and perpendicularity tolerance class IT4.

Ceramic bearings Si3N4. Bearing cage PTFE. For most applications Si3N4 is the preferred material for ceramic bearings. Silicon nitride bearings are light, very hard and highly wear resistant. High and ultrahigh performance bearings are used in e.g. aerospace technology, metal production industries (high application temperatures), machine manufacturing, chemical industries (chemically aggresive substances), pharmaceutical and medical industries, semiconductor and biotechnology (clean room enviroments which may not be contaminated by lubricants). On request Special version with PEEK ball cage. Without ball cage.