Ball guides - Import export

Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request.

For pneumatic cylinders ISO Ø8 and Ø10 Guide on bronze bearings or ball bushings The smallest guide unit in the range It’s the smallest unit, suitable for ISO6432 Ø8 and Ø10 pneumatic cylinders, allowing an ISO cylinder to be kept for small guided cylinder applications. It has a long Ushape to remain compact and have a guide length comparable to an Hshape. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). Any special stroke is possible, with a maxi stroke of 200 mm.

Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manually operated clamping elements for static clamping tasks. Manual clamping process using the freely adjustable clamping lever. The floating clamp ensure symmetrical application of force onto the rail. Up to 50,000 static clamping cycles (B10d value). In general, a friction connection is created between the clamping element and the the linear guide on the open faces of the profile guide rail so that the ball guide tracks are not damaged. The retaining force is tested on an oil smeared profile guide rail. An adapter plate, dependent on the type of carriage used, is required for height adjustment.

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

HIGH-PERFORMANCE With automatic density adjustment to maximize marking speed and readability, automatic part detection and multi-level marking the XF510m performs at its best constantly. Fitted with multi-dot technology making it possible to carry out deeper markings, it becomes your go-to solution for direct part marking. RELIABLE & DURABLE Utilizing high precision zero-play ball screws, high rigidity guide rails, and integrated cooling the XF510m is designed to be bold and run problem-free in the most demanding of environments. DOT PEEN MARKER Mark any type of 2D code, Data Matrix, QR code engraving, UID, GS1, Unicode characters safe in the knowledge that our ultra-precise M1L stylus will be providing unparalleled accuracy. Also use for aluminum plate engraving, steel engraving, VIN plate engraving, and as your favorite metal marking machine.

These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks

Table for manual using or outside motorization Guided on ball bushings Guide tables without transmission These tables are used for manual movement or for external drives. The end plates are tapped in the center to optionally receive a hydraulic shock absorber or stroke adjustment. On request, a position clamping is available (option /BP0* on leadscrew tables). Range of linear tables with cylinder or screw transmission These tables exist, in the same dimensions, in different versions – suitable for pneumatic cylinder Type 307 – with trapezoidal screw for electric drive Type 308 – with ball screw for electric drive Type 308 – with trapezoidal screw for manual drive Type 309

Short bearing housings (cylindrical) Long bearing housings (prismatic) Guide rods Cylinder rod couplings The subsets of this range allow to realize a guide adapted to your need and integrated to your machine. Make your own guide unit To make a guide unit adapted to your needs and integrated into your machine you choose the diameter of the rods according to the load capacity you choose the type of guidance (bronze, polymer or with ball bushings) you choose the guide length (long or short bearings) you choose the distance between the rods according to the application (on your support and your plate) you can integrate any cylinder (type, standard, brand …) you limit the number of parts by directly using a support of your frame and your own end plate You simply have to guarantee a parallelism of the bearing axes by the quality of the surface of your support. A range of bearings, guide rods and rod coupling is also available in stainless steel Guide Type 34X

H guide unit for pneumatic cylinders ISO Ø12 to Ø100 Long guide on ball bushings or bronze bearings Protected by wipers seals H guide unit according ISO standard This Classic series of linear guide unit is the most common on the market. It ensure the guiding and antirotation of the payload, the floating coupling protects the rod of the cylinder from any mechanical stress. Adapted to the ISO6432 (Ø12 to 25) and ISO15552 (Ø32 to 100) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Guide unit on plain bearing or ball bearing The plain bearings version is recommended for static radial loads, short strokes, dusty environments, it’s the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentering loads. For critical applications, we propose Strengthened and Heavy series and for simple antirotations, you can opt for Useries, Classic or Light.

For pneumatic cylinders ISO Ø16 and Ø25 Guided on ball bushings Adjustable mechanical stops Manipulator made with your components = competitiveness These linear units make it possible to carry out any translation requiring precision and rigidity, to move up to 15 kg on 1, 2 or 3 axes (handling, assembly, loading, transfer, packaging …). By adding a cylinder with sensors and flow limiters as well as hydraulic shock absorbers from the supplier of your choice, you get a complete module that generally meets the requirements of the panels of suppliers, at a very competitive price.

These bearing blocks permits to realize linear tables with 2 guide rods. Guided by 4 ball bushings and protected by 4 wiper seals. Quadruple bearings or bearing blocks These bearing blocks (or quadruple bearings blocks) permits to realize linear tables with 2 guide rods. Guided on 4 ball bushings and protected by 4 wiper seals. The housing is in anodized aluminium. In option, for dusty environment additionnals wipers in nitrile (/RNI) or polyurethane (/RPU). With 2 guide rods in hardened steel, you can easily make a precision linear table that will withstand significant torques and loads (according to the length of the rods). These blocks are interchangeable with the bodies of Type 306 linear tables, Type 309 trapezoidal screw tables, Type 308 ball screw tables and Type 307 pneumatic cylinder tables. They can therefore be the basis for a special execution of these products.