Form pack - Import export

The F1000 carton erector is used when a large number of boxes of the same size are to be formed. With the erector it is possible to form the boxes and accumulate them in a specific area of ​​the warehouse, ready for use. By combining the erector with a line (taping base, filling surface and taping machine) it is possible to create the boxes as they are needed, without taking up space for accumulation. The erector automatically forms the boxes by taking them from the side magazine and folding the four lower flaps. The settings regarding box size, speed, etc. are all settable via a convenient front panel. Operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F1000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box.

Mixed form tea, 12 packs per pallet.

Form tea with apricot, 12 packs per pallet.

Can be provided in packed form with 250gr, 500gr or 1000grams

Can be provided in packed form with 250gr, 500gr or 1000grams

Can be provided in packed form with 250gr, 500gr or 1000grams

Can be provided in packed form with 250gr, 500gr or 1000grams

Heat conductive ePTFE Yarn, PTFE fiber, Run-In Lubricant and elastic Silicon Tube Core Practical useful application data: max. temperature: +160 °C Characteristics Elevated heat conductivity For higher shaft speeds than S 6 SKV High chemical resistance and for clean media Operating range Pressure [p max]: 20 bar, Velocity [v max]: 10 m/s Temperature: t = -100… +280 °C pH: 1 - 14 Density: 1.60 g/cm³ Practical useful application data: max. temperature: +160 °C Main application Mixer Agitators Autoclave Kneader Paddle dryer Suitable for Rotating Equipment with higher surface speed radial run out Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.2 15 2.8 16 [5/8"] 2.4 18 1.9 19 [3/4"]...

PTFE-fiber with PTFE Impregnation, Run In lubricant and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 6 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Mixer Agitators Autoclave Kneader Paddle dryer Suitable for Slow Rotating Equipment with radial run out Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

PTFE-fiber with PTFE Impregnation and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Tank lid, door and lid seal Suitable for Static applications Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

PTFE fiber packing with mechanical reinforcement, PTFE Impregnation, Run-In Lubricant and elastic EPR Tube Core Practical useful application data: due to Elastomeric core max. temperature: +150 °C Characteristics High cross section density and structural stability, yet elastic and adaptive for bigger radial shaft run out Suitable for vacuum Mechanical stability for products with abrasive content Improved recovery Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Temperature: t = -50… +280 °C pH: 1 - 13 Density: 1.45 g/cm³ Practical useful application data: due to Elastomeric core max. temperature: +150 °C Main application Mixer Agitators Autoclave Kneader Paddle dryer Suitable for Equipment with radial run out and products with abrasive content Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on...

ePTFE-Graphite Fiber with special Para-Aramid corners Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Form stable, wear resistant, heat conductive packing, can be used as bullring Highest pressure resistance, practically no gap extrusion For high pressure plunger pumps up to 1,500 bar as die formed rings Highest pressure resistance Safe and universal packing for abrasive media Precompressed rings are recommended for applications in plunger pumps Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 1500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Plunger pumps Gate valves Suitable for High pressure plunger pumps and similar applications Bull rings Form of delivery This packing can be...

Combination Braid Made of PTFE and Para-Aramid Fiber with Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Characteristics Universal packing for abrasive media which need a reinforced, wear resistant and form stable packing Shaft protecting through good coefficient of fiction No contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Pulp and paper industry Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in...

PTFE Fiber with PTFE Blocking Agent and Silicone Free Run-In Lubricant Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 15 bar, Velocity [v max]: 10 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Chemical industry General industry Variant S6SI with Food certification EG 1935:2004 in accordance with EU 10/2011 FDA conformity Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special...

High strength ePTFE-Graphite Characteristics Extrusion resistant even with large clearances Form stable, wear resistant, heat conductive and can be used as bull ring Shaft protecting (recommended surface hardness: HRC 25) In high pressure applications die formed rings are recommended Operating range Pressure [p max]: 30 bar, Velocity [v max]: 8 m/s Pressure [p max]: 800 bar, Velocity [v max]: 3 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application High pressure plunger- and dosing pumps Bullrings for mixers, highpressure valves agitators, gate valves and valves Suitable for Chemical industry Petrochemical plants High pressure machine constructions Approvals BAM for liquid and gaseous oxygen 60 °C/15 bar, 40 °C/65 bar, 200 °C/50 bar Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg...

Braid of Flexible Expanded Natural Graphite Tape Reinforced with Inconel Wire Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use valve packing Expanded graphite of higher quality Coefficient of expansion similar to steel For valve applications rings should be approx. 20 - 25 % compressed at installation Precompressed rings are recommended Operating range Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.20 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Power plant technology Petrochemical plants Boiler houses High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special...

Braid of Flexible Expanded Natural Graphite Tape Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal use in pumps and valves Very good dry-running characteristics No wear, perfect thermal conductivity High quality pure graphite Coefficient of thermal expansion similar to steel Rings should be approx. 20 - 25 % compressed during assembly Recommended as die formed rings Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 300 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.15 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses Petrochemical plants High pressure- and high temperature applications For higher pressure and temperature applications use suitable bullrings. Form of delivery This packing can be manufactured from 3...

Braided from Expanded Graphite Tape Reinforced with Inconel Matrix and special PTFE impregnation Characteristics No slip stick effect High cross section density High temperature resistant to minimize emissions Non hardening, good reset capability Coefficient of thermal expansion similar to steel Easy to cut, install and disassemble Low coefficient of friction minimizes the adjustment force in valves Recommended as die formed rings For valve applications rings should be approx. 25 - 30 % compressed at installation Operating range Pressure [p max]: 300 bar Temperature: t = -200… +300 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses High pressure applications Approvals ISO 15848-1 CC1 TA Luft 300 / VDI 2440 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 -...

Carbon Filament Yarn with High Temperature Graphite Blocking Agent Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics High temperature blocking agent increases the cross section density and acts as a form stable pressure bed for the Carbographite fiber Flexible, wear resistant and valve stem protecting Perfect for temperature cycling loads as the coefficient of thermal expansion corresponds to that of steel Excellent as bullring in use with rings of expanded graphite Operating range Pressure [p max]: 30 bar, Velocity [v max]: 15 m/s Pressure [p max]: 300 bar Temperature: t = -40… +550 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Main application Valves Fittings Gate valves Flaps Suitable for Power plant technology Boiler houses High pressure- and high temperature applications Form of delivery This packing can be manufactured from 3 to 40 mm square as...

100 % PTFE Fiber with Unique Blocking Agent Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Very low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustment Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.65 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry General Industry Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections is...

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...

Meta-Aramid Fiber with PTFE Blocking Agent and Run-In Lubricant Characteristics Wear resistant, universal packing for applications with abrasive content High cross section density and structural stability, yet elastic and pliable Low friction, low shaft wear (HRC 45 shaft shaft surface hardness is sufficient) Clean packing, no contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.40 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on...

Braid of ePTFE yarn with Incorporated Graphite and Run-In Lubricant Characteristics Excellent heat conductivity Maximum protection of shaft against wear (HRC 25 is sufficient) Extended MTBF Easy and safe installation and handling No ageing process Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.50 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Vacuum pumps Suitable for Universal use Waste water technology Acids Alkaline solutions Oil and grease Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section as Style P1P. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on...

Hybrid braid in W-Profile made of heat conductive ePTFE Yarn with Meta-Aramid fiber reinforcement and Run-In lubricant Characteristics Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment. Recommended shaft surface hardness: HRC 35 Porosity filling coating increases density and protects the packing in crystallizing mediums. W-Profile Reinforcement reduces shaft wear Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixer Agitators Kneader Filter Suitable for Pulp and paper industry Chemical industry Power plant technology Waste water technology Applications with abrasive products and when white packing is required Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...

Carbon Staple fiber with special Graphite Impregnation and silicon free Run In lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High Cross section density due to special impregnation Excellent Value for money Graphitized all-round packing with Emergency run Capabilities Good wear resistance against abrasive and crystallizing products Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Valves Mixer Kneader Agitators Suitable for Chemical industry Pulp and paper industry Waste water technology Community facilities Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...