Results for
CETEC SYSTEMS SONDERMASCHINEN- VERTRIEBS GMBH
Austria
Forms the component wire in C-shape and cuts the residual part at 4mm. ESD. Steel thickness 3mm, Length 150mm
Request for a quoteNORELEM FRANCE
France
Hardened and ground (HRC 56 +2). Note: The locating pins can be easily removed with an extractor.
Request for a quoteCETEC SYSTEMS SONDERMASCHINEN- VERTRIEBS GMBH
Austria
Forms the component wire in C-shape and cuts the residual part at 4mm. ESD. Steel thickness 3mm, Length 150mm
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2566 threaded flange, grade 1.4571 42.4 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2566 threaded flange, grade 1.4571 33.7 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2566 threaded flange, grade 1.4571 26.9 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2566 threaded flange, grade 1.4571 21.3 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2566 threaded flange, grade 1.4571, 17,2 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2633 weld-neck flange, grade 1.4301 48.3 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2633 weld-neck flange, grade 1.4301 42.4 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2633 weld-neck flange, grade 1.4301 33.7 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2633 weld-neck flange, grade 1.4301 26.9 PN16 Form C
Request for a quoteSTAPPERT INTRAMET SA
Belgium
DIN 2633 weld-neck flange, grade 1.4301 21.3 PN16 Form C
Request for a quoteNORELEM FRANCE
France
Stainless steel 1.4308. Grub screw stainless steel 1.4305. Pin stainless steel 1.4310. Version: Ground and polished or blasted. Grub screw and pin bright. Drawing reference: Form B: drilled through Form C: blind hole Form D: tapped and counterbored Form E: tapped blind hole Form L: external thread
Request for a quoteNORELEM FRANCE
France
Form A locating pins are used to position workpieces and fixture parts in reamed holes. The flattened Form C can be used to bridge tolerances in hole spacing or to secure the part to be positioned in one direction only. The Form A locating pins can also be used as limit stops or fixture feet. Advantages: Cerazur is extremely impact and bend resistant. The basis of this material is zirconium oxide. It is a composite metal-ceramic material. Drawing reference: Form A and B: cylindrical locating pin Form C and D: flattened locating pin
Request for a quoteNORELEM FRANCE
France
Form C and F: Ball steel, ball seat high-carbon steel. Form G and J: Ball high-carbon steel, ball seat steel. Version: Form C and F: Ball hardened and black oxidised, ball seat phosphated. Form G and J: Ball phosphated, ball seat hardened and black oxidised. Note: The self-aligning pads serve as stops, rests and thrust pads in fixture construction. The seating face returns to the start position when the load is removed. Ball secured against rotation. Drawing reference: Form C: male thread, flattened ball, smooth Form F: male thread, flattened ball, diamond grip Form G: press fit, flattened ball, smooth Form J: press fit, flattened ball, diamond grip
Request for a quoteNORELEM FRANCE
France
Housing Form A plastic. Housing Form B die-cast zinc alloy. Active face POM. Housing Form C high-alloy stainless steel Version: Voltage: U = 10 – 30 V DC Function: Normally open Switch type: PNP Mounting type: flush Security type: IP 67 Note: Non-contact, functions wear-free with high switching frequency and accuracy. Non-sensitive to vibrations, dust and moisture. Inductive sensors record all metals without contact. Form C enables screw fastening in a T-slot. Is safe and saves space as the proximity switch lays flush in the slot. Short-circuit proof and reverse-polarity protected.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SCHMITTER HYDRAULIK GMBH
Germany
Copper sealing rings Form C according to DIN 7603 material: SF - Cu, as 0,3 mm thick sheathing and a asbestos - free filler from high temperature resistant, mineral and ceramic fiber working ... Category Sealings / Copper sealings / Copper fill rings Product number supplier 100302
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Assembly immediately upon receipt of order - generally in stock assortment filling sealing rings CU - AFM DIN 7603 Form C The assortments contains: copper filling sealing rings from SF - CU ... Category Sealings / Copper sealings / Assortments / Inflation ring Product number supplier 100300
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Assembly immediately upon receipt of order - generally in stock assortment filling sealing rings CU - AFM DIN 7603 Form C The assortments contains: copper filling sealing rings from SF - CU ... Category Sealings / Copper sealings / Assortments / Inflation ring Product number supplier 100300
Request for a quoteNORELEM FRANCE
France
Form A: Ball element case-hardened and black oxidised. Form B: Bright. Form C: Ball element case-hardened and black oxidised. Form D: Ball element bright. Form G: Ball element case hardened and black oxidised, foot with anti-slip plate. Note: The anti-slip plate absorbs vibrations and prevents the swivel foot slipping The loading indicated in the table is a recommendation up to which permanent static load the swivel foot can be used.
Request for a quoteNORELEM FRANCE
France
Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
Request for a quoteNORELEM FRANCE
France
Hardened and ground (HRC 60 ±2). Note: The locating pins are designed to make the joining process easier. Used in combination with hardened locating bushes 02026, they enable exact, low-wear, and fast changes of the workpiece. Versions D1 = 5 and D1 = 6 do not have an internal thread. Drawing reference: Form B: cylindrical pin Form C: rhomboid pin
Request for a quoteNORELEM FRANCE
France
Body tempered. Ball hardened (50 - 55 HRC). Note: Self-aligning pads serve as stops, supports and thrust pads in fixture construction. They can also be installed in existing clamping devices, e.g. arness clamps. Ball is secured against rotation. Drawing reference: Form C: male thread, smooth flattened ball Form F: male thread, serrated flattened ball
Request for a quoteNORELEM FRANCE
France
Body tempered, black oxidised. Ball hardened, bright. Inserts: Form C, F hardened, black oxidised. Form M with carbide serrations, black oxidised. Form K white. Form E hardened, bright. Form O diamond impregnated surface comparable to 100 grade abrasive grit. Form P polyurethane surface, hardness 60 Shore. Note: Self-aligning pads are used to support and clamp unmachined and machined workpieces. In addition, they serve as stops, supports and thrust pads in fixtures and toolmaking. The ball can be removed from the housing by applying light pressure to the socket head screw. Ball secured against rotation. Advantages: Highly cost-effective as inserts can be exchanged. The built-in O-ring holds the ball in place and keeps dirt and foreign particles out, ensuring uniform movement. Drawing reference: Form C: flattened steel insert, smooth Form E: flattened stainless steel insert, smooth Form F: gripper face Form K: flattened POM insert, smooth
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Straight screw - in unions KOMATSU, tapered inch Connection thread: metric fine thread, cylindric with 60° outer cone Screw - in thread: Whitworth pipe thread (BSPT), tapered Screwed plug: form C ... Category Screw connections, adapter a. accessories / Komatsu screw connections / Straight / Screw-in connections / Imperial screw-in thread BSPT beveled / Steel Product number supplier 47523357
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Straight screw - in unions KOMATSU, tapered inch Connection thread: metric fine thread, cylindric with 60° outer cone Screw - in thread: Whitworth pipe thread (BSPT), tapered Screwed plug: form C ... Category Screw connections, adapter a. accessories / Komatsu screw connections / Straight / Screw-in connections / Imperial screw-in thread BSPT beveled / Steel Product number supplier 47523357
Request for a quoteNORELEM FRANCE
France
Form A: Tempered and electro zinc-plated. Form B: Tempered and electro zinc-plated. Complete with DIN 787 screw for T-slots, DIN 6340 washer and DIN 6330B nut. Form C: Tempered and electro zinc-plated. Complete with DIN 6379 stud, DIN 6340 washer and DIN 6330B nut. Note: These clamp strap assemblies can be quickly and infinitely adapted to the clamping situation. The clamp straps have different heel types both sides enabling the best end to be selected depending on the specific application. These extremely versatile clamp straps are suitable for use by metal cutting or non-cutting machining and also for press and injection-moulding applications.
Request for a quoteNORELEM FRANCE
France
Stainless steel version Indexing pin not hardened: Threaded sleeve 1.4305. Indexing pin 1.4305. Mushroom knob black-grey thermoplastic. Version: Steel version: Indexing pin hardened, ground, black oxidised. Stainless steel version: Indexing pin not hardened, ground, bright. Note: Indexing plungers are used to prevent any change in position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. Form C or D is recommended for applications in which the pin is disengaged over extended periods and should be prevented from springing back.
Request for a quoteResults for
Form c - Import exportNumber of results
102 ProductsCountries
Company type
Category