Results for
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The force measuring chain is an universal reference measuring chain for the calibration of press-fit force measuring equipment. It finds applications in the quality assurance, commissioning and equipment monitoring fields. A DAkks calibration certificate is included so that the force measuring chain can be traced back. The calibration is traceable through accreditation at the German Accreditation Body. The calibration certificate records the displayed values for mounting positions at 0°, 120° and 240°. During calibration in field, the reference load cell is inserted in line with the flux of the press-fit measuring equipment. The force application is of central significance here for the quality of the measurement. Special force application parts are required, so that the line of action of the force agrees as exactly as possible with the geometrical axis of the load cell that is to be measured (central loading).
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Inside the multi-component force transducer are two webs, each offset by 90°, each with a strain gage full bridge, which convert the radially acting X / Y forces on the guide bush into an electrical signal. Due to the sensor body made from a block with its special structure, the sensor has a very high degree of dimensional accuracy and low crosstalk between the two forces. Due to the special design, the sensor has excellent linearity properties and is designed for a long service life in dynamic applications. The two independent signal connections allow flexible adaptation and further processing. Features: — Measuring ranges: 0 ... 4448 N / 0 ... 2224 N (0 ... 1000 lbs / 0 ... 500 lbs); 0 ... 8896 N / 0 ... 4448 N (0 ... 2000 lbs / 0 ... 1000 lbs) — Further measuring ranges on request — Non-linearity < 0.1 % F.S. — Low cross talk < 0.75 % F.S. — High dimensional accuracy, because sensor is made from one part — Excellent price/performance ratio
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The force measuring chain has been developed for applications where the requirements for precision are not the primary focus, but rather where an economical purchase price and simple functionality are the key criteria. The sensor‘s strain gauge technology allows both static and dynamically changing forces to be measured. The large display means that the force acting on the sensor can be read easily. The four integrated threaded holes allow the sensor to be integrated quickly and easily into existing production and assembly equipment. Typical applications include: —Testing the strength of welded joints —Sports medicine —Monitoring the clamping force of hose connections The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The FingerTPS is a set of wearable finger sensors that enable you to measure grip, touch, and other hand forces. A more affordable alternative to the TactileGlove, this easy-to-use system captures high-quality data in a natural and organic form-factor. **Finger selection can be customised to specification** Features: Design or research with accurate, sensitive and repeatable data even for complex finger geometry. Comfortable and minimally-intrusive system allows for full range of motion and ensures natural hand manipulation research. Plug and play—no configuration needed. Just place on the hand, calibrate the sensors and Chameleon auto-detects your hand configuration. Compact wireless Bluetooth electronics provides simple and easy to use set-up, with minimal wires. Connect two wrist assemblies at the same time for two handed operations.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The CTA TactileHead is a width adjustable pressure measurement and mapping system for quantifying pressures exerted by headphones, earmuffs, headbands, and more on various head sizes. A high-resolution Conformable TactArray sensor is molded onto the curved area around the ear of the mannequin head, while another high-resolution TactArray sensor is mounted to a flat plate on the other side of the head to provide a controlled comparison. Chameleon, our real-time visualization and acquisition software, is then used to display pressures from both sensors simultaneously and to perform real-time analysis for evaluating comfort and fit.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
A sensitive, waterproof capacitive tactile sensor array designed to capture instantaneous and actionable spray pattern and spray pressure data generated by sprayed fluids or gases. Capture spray distribution and impact pressure and accurately identify the location and pattern where sprayed fluid or gases land. Available in two application variants, Spray Pressure or Spray Pattern, and optimal for use in situations where spray pressures are infinitesimally small.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The Stretchable TactArray is a flexible pressure sensor pad engineered from a soft and conductive silver-metalized Spandex. The Stretchable TactArray can stretch up to 10% and be folded in multiple directions while still maintaining high data quality. This sensor is approximately 3-7 mm thick and is best suited for dynamic curvature applications such as seats, horseback saddles and other applications where sensor thickness is not an issue. Key Features Stretch this sensor up to 10% while maintaining accurate data Can be used on objects with dynamic, multi-directional curvature (e.g., heads, spheres, computer mouse) Ideal for applications where the sensor will be flexed or deformed through use, such as seat cushions, mattresses, or clothing Capture high quality pressure data between pressures of 5 psi to 50 psi and within temperature ranges of –20° to 50°C Comes standard with Chameleon Visualization Software, and is available in many sizes and configurations
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The Industrial TactArray is a flat sensor that can capture and map pressure distribution in even the most extreme conditions. Constructed from high-quality Kapton or Polyimide, the Industrial TactArray can pressure distribution of up to 700 psi and in temperatures between -40° C and 200° C. This system is best suited for use in applications requiring tactile sensors that can withstand extremely high temperatures and pressures—like heat presses, brake pads, and nip rollers. Key Features High-resolution sensor arrays can measure pressure distribution at levels of up to 700 psi and retain performance characteristics in temperatures between -40° C and 200° C Real-time thermal compensation ensures accurate measurements even under changing temperature conditions Ultra-thin construction, 0.3 mm thick, and high-resolution sensing elements Can accommodate moderate flexing and bending Available in multiple sizes and configurations Chameleon Visualization Software included
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The Conformable TactArray is a ~1mm thick flexible sensor constructed from soft, conductive cloth and captures pressure distribution between two objects in direct physical contact. The Conformable TactArray can accommodate varying degrees of curvature and can output accurate, repeatable data even while wrapped around irregular shapes. Key Features and Benefits: Maintain high-resolution and capture quality data even around complex shapes High resolution, sensitivity, and repeatability allow for consistent capture of accurate data The sensors can capture a minimum sensing pressure of 10 Pascal Save time and improve results through repeatable accuracy and less recalibration time needed Available in a wide range of size configurations, pressure ranges, and resolutions Comes standard with the powerful Chameleon Visualization Software
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The PPS TactileGloves are tactile pressure sensor gloves with embedded sensing elements throughout the palm and fingers, allowing for natural and accurate testing of pressures applied to and exerted by the hand. Nearly any hand operation can be measured accurately through the 65 individual highly sensitive sensing elements within each glove. Sensor Glove Features: Ensure a natural test environment with the only glove hand sensor on the market User friendly, comfortable to wear and no adhesives or wires to get in your way High-resolution, sensitive sensors detect even the lowest pressures (0.1oz/3g) Meant to handle the real world. It's wireless and battery powered. Delivered in pairs (Left + Right). Available glove size: small, medium, and large.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The TactileMat is a rigid and robust pressure sensing pad that is of the largest, high-resolution pressure mapping sensors on the market. The use of a large area sensor like the TactileMat allows you to capture dynamic pressure over a larger area without the dead zones typically associated with trying to use multiple smaller sensors side-by-side. This is one of the largest pressure mats on the market. Key Features Large pressure mapping surface area (220 mm x 450 mm) Rigid, robust, and can be built in various full scale ranges (FSR) up to 188 psi FSR Waterproof IP53+ (Can be special ordered to higher water-proofing upon request) Slim construction (7.69 mm) with a non-slip base Array Size = 44 x 90, element size = 5 mm x 5 mm
Request for a quoteEMSYST
Slovakia
Precise force sensor, not sensitive to lateral forces, well suited for testing. Range: from 1 kN up to 500 kN Force dir: Tension / Compression
Request for a quoteEMSYST
Slovakia
Extremely high load sensor with good metrological properties. Range: from 500 kN up to 3 MN Force dir: Tension / Compression
Request for a quoteEMSYST
Slovakia
Robust type load cell with a wide capacity range designed for universal use. Range: from 100 N up to 500 kN Force dir: Compression Version EMS51 has built-in signal conditioner with voltage or current output.
Request for a quoteEMSYST
Slovakia
Universal membrane load cell with robust construction is suitable for industrial use. The force must be applied in the axis of the sensor. Range: from 1 kN up to 50 kN Force dir: Tension / Compression Version EMS41 has built-in signal conditioner with voltage or current output.
Request for a quoteEMSYST
Slovakia
Universal membrane force sensor for general use. The load is applied via external threads. Range: from 100 N up to 5 kN Force dir: Tension / Compression
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EMSYST
Slovakia
In-Line robust load cell with very good metrological characteristics suitable for measurements in demanding conditions like tanks weighting. Range: from 500 N up to 200 kN Force dir: Tension / Compression Version EMS151 has built-in signal conditioner with voltage or current output.
Request for a quoteTEST GMBH
Germany
The small dimensions of the hydraulic force transducers of the model series TesT 1001 / 1011 / 1021 as well as the flat building method permit versatile applications. The small transducers were conceived for occasional control measurements, e.g. for adjusting or service work. The indicating instruments of model versions 1001 and 1011 have a diameter of 63 mm. The indicating instrument of model version 1021 can have a diameter of 63 mm or 100 mm. All model versions possess a drag indicator to display peak values.
Request for a quoteEMSYST
Slovakia
Version EMS111 has built-in signal conditioner with voltage or current output. Range: from 200 N up to 10 kN Force dir: Tension / Compression
Request for a quoteSINGLETACT
United Kingdom
This is a calibrated pair of a SingleTact sensor and I²C electronics board. It comes with 4 jumper wires and Calibration sheet. We have various combinations of sizes and pressure ranges, please select a sensor that meets your criteria. A handy Help Me Choose page can assist you with the selection. The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.
Request for a quoteSINGLETACT
United Kingdom
This is a calibrated pair of a SingleTact sensor and USB electronics board. It comes with 50 cm USB cable and a Calibration sheet. We have various combinations of sizes and pressure ranges, please select a sensor that meets your criteria. A handy Help Me Choose page can assist you with the selection. The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.
Request for a quoteResults for
Force sensors- electrical - Import exportNumber of results
23 ProductsCountries
Company type
Category