Flow sensors - Import export

The IST AG MicroFlowSens (MFS) technology was developed for fast flow measurements. Due to the membrane system, the thermal mass is reduced to the minimum resulting in a very fast response time and low power consumption. In addition to measuring flow rates, the MicroFlowSens offers an outstanding sensitivity and is able to detect flow direction. The MFS flow sensor is optimal for limited space system integration and is available as integrated sensor on a PCB. Further advantages of the MFS thermal mass flow sensor include: — Excellent solution for applications with high flow rates and fast response time in CTA mode — Very high measuring dynamic with CTA mode (10'000'000 : 1) without bypass — Excellent for the measurement of very low flow rates and leakage detection with bridge mode — High chemical resistance against aggressive gases and vapors — Different sensitivities, circuit topologies available — Detection of flow direction — Customer-specific sensor layout upon request

The IST AG FS7 thermal mass flow sensors are the successors of the FS5 flow sensors and exhibit a symmetrical heater design and enhanced sensitivity. The FS7 flow sensor is applicable in gas and offer excellent long-term stability. The small thermal mass of the FS7 sensor provides a fast response time. Additionally, the standard FS7 sensor is also available with a housing which is easily implemented into various applications. Further advantages of the FS7 thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request. The IST AG FS7 flow sensors are optimal for measuring gas flow in various flow applications.

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response time. Further advantages of the FS7.4W thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request The IST AG FS7.4W flow sensors are optimal for measuring gas flow in various flow applications.

The IST AG SFS01 EvaKit offers an easy evaluation of the SFS01 gas flow sensor. It has both analog and digital output (I2C) and allows a fast and flexible evaluation of the SFS01 sensor. The I2C output includes both raw values and calibrated flow values from 0 to +-200 sccm. Further advantages of the SFS01 EvaKit include: — Excellent measuring dynamics — Analog output of raw signal — Digital output with raw signal and fully calibrated signal — Integrated flow channel with pneumatic connections

The SFS01 is particularly suitable for low flow velocities up to 3.5 m/s (in gases). It shows very fast measurement results of the flow rate as well as the flow direction. The Silicon Flow Sensor SFS01 offers three main characteristics: — Very fast response time <5 ms — Very low energy consumption — Easy system integration including temperature compensation Well-adapted channel geometries allow the performance of the sensor to be optimally aligned to the desired application. The SFS01 flow sensor is ideally suited for space-limited applications, but can also be easily upgraded to complete ready-to-use systems. Suitable application areas for the SFS01 flow sensor are flow measurements in battery-operated / portable devices, air conditioning technology (HVAC), automation technology as well as process and control engineering.

Radar material flow sensor for pipes and hoses

EGE amplifier complement the EGE flow sensors without integrated amplifier. They process the signals of a measuring sensor and visualise the flow state using an LED indication. In addition, they provide switching or analogue outputs for flow and temperature to the control. The device set-up is easy and takes place using a potentiometer or the buttons on the front. The devices are installed in a control cabinet or comparable protected housing. The EGE amplifier of product series SKM 420; SKM 520; SKM 552 are suitable for supply with 24 V DC or 230/115 V AC.

EGE flow rate sensors for the flow rate detection of 10...100 l/min feature one-piece measuring tubes with an inner diameter of 20 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.

EGE flow sensors for gaseous media in explosive areas permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. The measuring sensors of the product series ST 400 Ex; STS; STEX have ATEX approval and may, dependent on their design, be used in Gas-Ex areas requiring equipment for EPL Ga or EPL Ga/Gb. In the Dust-Ex area their use is permitted up to EPLDa.

EGE Ex-amplifier complement the EGE flow sensors without integrated amplifier. Flow sensors with approval for operation in explosive areas must be connected to approved Ex amplifier. EGE amplifier for ATEX-compliant operation supply the sensors via an intrinsically safe power circuit and provide electric separation from the mains. The amplifier itself must always be installed in areas which are not explosive.

EGE flow sensors for gaseous mediums without integrated amplifier permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier, e.g. within a control cabinet. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. This includes e.g. air conditioning technology, monitoring of exhaust air systems and ventilation monitoring.

EGE flow rate sensors for the flow rate detection of 10...100 l/min feature one-piece measuring tubes with an inner diameter of 20 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.

EGE flow rate sensors for the flow rate detection of 0...1 l/min feature one-piece measuring tubes with an inner diameter of 3.5 mm to 4 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in hoses or circuits with small pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.

EGE flow rate sensors for the flow rate detection of 1...10 l/min feature one-piece measuring tubes with an inner diameter of 4...10 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily programmed using buttons and a multi-segment display. EGE flow rate sensors can be installed in circuits with corresponding pipe diameters using threaded fittings or compression fittings. The provide excellent measuring results wherever the safe, robust and low-maintenance monitoring of low flows is required.

In physics the absence of material in a room is called a vacuum. This means that, in addition to no solid objects present, there is also a gas pressure of (almost) zero, thus below atmospheric pressure. RIEGLER vacuum technology consists of vacuum ejectors, suction grippers and various system supplements, such as connection parts, sensors, flow valves and pressure switches.

In physics the absence of material in a room is called a vacuum. This means that, in addition to no solid objects present, there is also a gas pressure of (almost) zero, thus below atmospheric pressure. RIEGLER vacuum technology consists of vacuum ejectors, suction grippers and various system supplements, such as connection parts, sensors, flow valves and pressure switches.

It is designed to give water into the wheat during the tempering of the wheat. The semi-mechanically operating system is mounted on forced annealing machines or internal leak screw screw. The water to be supplied to the system is first filtered and cleaned, and the sensor detecting the flow of wheat delivers the amount of water whose flow rate is adjusted beforehand to the system by opening the solenoid valve, the sensor closes the solenoid valve when the flowing wheat is cut. There are various types of flowmeters, and special types are manufactured according to the application place and flow. Application Fields ◾ At food processing industry ◾ Flour and semolina mills ◾ Macaroni factories ◾ Feed mills ◾ At other similar industrial plants

Fast and compact flow module, suitable for gas dosing systems, manifolds and analysers. Easy to integrate with compact design, factory calibration and pins for HW address setting This module is also available with different flow rate ranges: +/- 200 sccm: > request product now +/- 50 sccm: > request product now

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel

The IST AG LV5 sensor is a flow-through biosensor and offers the possibility for multi-parametric measurements, since up to 4 analytes can be measured simultaneously (glucose, lactate, glutamine, glutamate). The sensor features a very small flow cell (1 µL) and therefore requires minimal sample volumes when used as an analyzer. Further advantages of the LV5 biosensor include: — Excellent long-term stability over a month in continuous measurement mode (lifetime varies depending on various factors, including the analyte concentration and buffer system (medium) amongst others) — Long shelf life (under appropriate environmental conditions) — Gamma and beta sterilization compatible — Suitable for continuous and analyzer measurement modes — Fast response time (depends on the buffer system (medium)) — Reference, counter and blank electrodes on-chip — Integrated flow cell (various volumes) Suitable for sampling systems in laboratories or food and pharmaceutical industries.

Flow monitoring Flow monitoring is a procedure that demands a reliable and reproducible surveillance of limit values and flow patterns. Flow sensors detect critical deviations of the flow rate of liquid and gaseous media. Typical areas of application are the monitoring of cooling circuits in welding applications for example, protection against dry running of pumps, as well as the flow monitoring in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored. Flow rate measurement In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.

System measuring the lateral distribution of Rauch Landmaschinen fertilizer disc spreaders

Radar Sensor measuring Spray quality signature for industrial applications

The preeflow flowplus16 is a material-resistant, dead space-free miniature pressure sensor in the smallest design - for moving fluids. The "Luer-Lock" (male/female) on both sides makes it suitable for all common dosing systems that work with this type of thread. The sensor generates a standardized, compatible, linearized and temperature-compensated output signal. Existing dosing systems can be easily extended and protected with the pressure sensor. The flowscreen is a robust evaluation device for applications in various fields of application. In combination with the pressure sensor flowplus16, a complete system for fluid process monitoring is created. Thanks to standardized signals and standardized connections, the components can also be integrated as individual components. Your advantages: - Inline sensor - A pure flow sensor - Maintenance-free - Supply/voltage supply 24 V +- 10% - Mechanical Luerlock connection to DIN EN 1707

Electrodynamic flow sensor for the measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 m. Ideally used in leanphase conveying. In free fall conditions with at least 2 m/s drop speed. • suitable for very low concentrations • ceramic coating prevents sensor wear

The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.

Another working area of the Suvis GmbH is the field of innovative sensor systems applied to particle and flow measurements taking into account microsystems. We develop novel flow and particle sensor systems for the application in environmental technology, process and mechanical engineering, and automotive technology. Important aspects are robustness and economicalness of the complete sensor system in order to create for the above mentioned application fields practical and affordable solutions. The respective sensor system will be developed as a whole solution. This means besides the hardware set up that we also take care of the evaluation of the sensor signals with our own solutions. We develop from scratch up to prototype level including periphery technology development. Please contact us for a not binding offer. We would like to know more about your challenge!

MCERTS QAL1 approved, stand alone or multisensor particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes. • ProScatter™ backscatter sensor technology with superior minimum detection <1mg/m³ • certified to 15 mg/m³ for processes with low typical emissions limits • manual and remote zero and span checks available to ensure optimal instrument performance and to comply with EN 13284/QAL1 • automatic functionality check • purge flow fail sensor option with inbuilt automatic optical shield activation • flue gas blocker option to protect plant engineers from harmful flue gases during maintenance