Results for
TURKOGLU
Turkey
Floating Valve with Ball From DN15 to DN50 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Ball : Stainless Steel, Plastic, Copper / Max. Working Temp. : 80 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact valve is installed in small compact boxes and as a valve with float in drinking water systems.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The TOPAZ float valve stands for a high flow rate (FastFill) and enables filling capacities of up to 200 l/min due to its diaphragm operating principle. It can be mounted above or below the water surface (not the COMPACT variant). It should be emphasised that the valve closes slowly in order to avoid a flashback to the water line and pumps. The quick-fill valve fills with full flow up to the highest level. All JOBE valves are made of high-quality ABS or nylon plastics and are always complete with float. The ROJO and TOPAZ series are also available in a COMPACT version (C), which is used when space for installation is limited, as the weighted narrow float has a very compact design.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Stainless steel float valves, stainless steel autotankers or optionally with plastic housing are a reliable level and inflow regulation in any container or as an automatic drinker. The float valve is covered by the housing and thus protected.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The diaphragm float valves series F can be combined with our float hollow balls made of high-quality PE-HD plastic (max. 70 °C), alternatively with copper or stainless steel balls for high temperatures. This series has drinking water certification ACS, this grants the suitability of products with drinking water.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The sturdy stainless steel and impact-resistant plastic housings are designed for mounting on tubs or similar containers. With the stainless steel brackets on the rim of the tank, the fill level can be easily adjusted. The fill level can also be finely adjusted on the PEKI brass high-performance float valve for high and low pressure. Stepless adjustment, simple installation, low wear, long service life and safe operation of the autotanker for automatic filling.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
ROJO float valve is a float-operated, mechanical plastic valve for automatic refilling of water storage tanks. All ROJO float valves can be mounted above or below the water surface. The ROJO is a good choice when a low flow rate is sufficient and the stainless design is an advantage. It should be emphasised that the valves have an automatic flow stop when disassembled for maintenance. The ROJO is also available as a low pressure model (HF models) with 60% more flow rate. All Jobe float valves come complete with float. We also carry the Compact ROJO variant, which has all the features of the ROJO even in small tanks.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The stainless steel valve 500 regulates levels even at high temperatures and in chemical liquids. Available in various sizes.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Brass float valves of open design in 3 and 4 inches can be combined with our hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls. The chemical nickel plating provides corrosion protection.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Brass float valve with high filling capacity. This is the PVA Series 8 external thread open type. This float valve is combined with hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
PVA compact float valves are a revolution in the float valve sector, designed by us and sold patent-protected for many years. This extremely space-saving with integrated floater allows a level control even in the smallest tanks as well as in flat gutters. With the small float valve 480, the level can be easily adjusted steplessly outside the liquid. Easy installation and maintenance-free, safe operation are guaranteed by the use of materials that have been tried and tested over many years in many industrial applications. The use of different sealing materials such as NBR / EPDM / VITON allows the use even at high temperatures and with various chemicals. Corrosion-resistant, as all components are made of plastic.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The TOPAZ Partfill is used, for example, in rainwater tanks or in tanks that should generally be filled as little as possible with city water. It ensures that in dry seasons the lowest required water level is automatically maintained with a partial fill. This allows the connected systems to continue operating while the tank has the maximum possible capacity for rainwater collection.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
TOPAZ differential valves are the ideal valve for water tanks in pressurised systems. The float valve with diaphragm offers a high flow rate of up to 200 l/min. Furthermore, an adjustable level control from 50 mm up to 2500 mm is possible. This minimises the number of start-stop operations of the pump system and ensures minimal pump operation.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The VA series 900 Diamond is suitable for appliances and equipment that require excellent resistance to corrosion and oxidation or are used in the food industry and medical technology. Of course, the 900VA series is also infinitely variable and designed for high temperatures up to 110°C.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
P.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
GLOBUS Quick-fit ball float valve made of pressed brass, complete with inlet pipe and quick-fit connection. The chemical nickel plating of the components provides corrosion protection for all valves.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Stainless steel float hollow balls - with slotted seat for flat rod of the PVA PEKI float valve series. The use of different sizes, shapes and materials optimises the use of the PVA float valves in many applications. From the space-saving compact float made of high-quality HDPE plastic to the elaborate stainless steel float like this one with individual fastening options, we can offer the right solution for almost every application.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
PEKI float valve series made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany . Compact design with high filling capacity manufactured in brass, chem nickel-plated and stainless steel.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Stainless steel hollow float balls - with duplex mounting made of AISI 316 - V4A in diameters from 90 - 220mm especially in combination with the float valve series stainless steel Diamond the float for highest demands on material, quality and workmanship. The duplex mounting is innovative and allows the attachment in 2 variants. On external thread and on float rods.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Each float valve is usually opened and closed mechanically by a float body according to the filling level in a container. We supply various float bodies for our valve series, which allow many application configurations depending on the design and size. Copper float with soldered-on suspension bearing and fixing screw suitable for use above 70° C.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
Stainless steel float hollow balls - with threaded mounting IG . The use of different sizes, shapes and materials optimises the use of PVA float valves in many applications. From the space-saving compact float made of high-quality HDPE plastic to the elaborate VA float body with individual fastening options, we can offer the right solution for almost every application.
Request for a quoteP.V.A. PLASTIK-VENTIL-ARMATUREN GMBH
Germany
The 700 VA series float valve allows infinite adjustment of the level and has a flat float rod for mounting variable floats. It is suitable for use at high and low pressure and high temperatures up to 120°C, but not for use in drinking water. The stainless steel float model is suitable for simple mechanical regulation of levels in the food, pharmaceutical and chemical industries due to the VA materials and silicone seals.
Request for a quoteECKARDT SYSTEMS GMBH
Germany
Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve
Request for a quoteTECNIDRO
Italy
The valve controls tanks and reservoirs emptying and avoids overflow. The valve operates by means of a differential hydraulic float complete with regulating levels mounted on the tank side. The float maintains the valve closed and opens only when the minimum pre-set level is reached. Once the valve is open, float allows tank inlet until maximum water level is reached again.
Request for a quoteTECNIDRO
Italy
The valve assures maximum water level into tanks and reservoirs and avoids overflow. The valve operate by means of a modulating float, mounted on tank, able to regulate gradual opening of the valve when water level goes down from maximum.
Request for a quoteTECNIDRO
Italy
This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until the closing input is transmitted by the 3-ways piezometric altitude pilot.
Request for a quoteSPM - SOCIÉTÉ PYRÉNÉENNE DE MÉTALLURGIE
France
Drillstar Industries can provide you with the full range of cross-overs and subs, with sizes up to 20" OD : - Straight OD subs. - Cross-Overs or reduced section subs. - Bit subs. - Saver subs - Rotary subs - Pup joints - etc. All our Cross-Overs and subs are made according to API specifications (7-1 and/or 5CT) and API standard features can be added (stress relief grooves, bores for API float valves, etc.) They can be fitted with the whole range of API drill stem (REG, API, etc.) and casing threads (STC, LTC, BTC...). VAM premium threads can also be used, as well as other special connections (Hydril FJWP, etc.) Our subs are fully machined from certified AISI 4145H alloy steel. Other materials such as non-magnetic steel, inconel, monel, stainless steel, aluminium, titanium, etc. can be used.
Request for a quoteResults for
Floating valve - Import exportNumber of results
34 ProductsCountries
Company type