Float switches - Import export

The Float Switches have the following Features: - G1/8" to G1", Flange (round and oval) - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - max. 2 NO oder NC, max. 3 Change over - Overall length upto 2.000mm - Temperature range -40°C to +150°C - max. 3bar - IP67 - Options: integrated RTD on request

The Float Switches have the following Features: - G1/8" to G1", Flange (round and oval) - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - max. 2 NO oder NC, max. 3 Change over - Overall length upto 2.000mm - Temperature range -40°C to +150°C - max. 3bar - IP67 - Options: integrated RTD on request

Stainless steel floats as individual level sensors for float switches as ball floats, jacketed floats or in cylindrical form. The areas of application are for high temperatures / for highly aggressive media / for high pressures / for explosive media as level measurement and buoyancy bodies.

Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve

2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch

The float switch is a small type float switch is a practical device which controls pool, water tower, water tank liquid level automatically. The M15-5 float switch is a cable type float switch is a practical device which controls pool, water tower, water tank liquid level automatically. It has the advantages of sensitive response, accurate control, novelty and practicality, so it is the necessary device of factories, hotels flats, buildings, houses and other high buildings water supply system. Characteristics: Simple Construction, reliable performance: The product can output stable and reliable switch control signal of “making”, “breaking” without any fault action, so its reliability is very high and anti-interference is strong. Sturdy and durable, need not maintain: The product can be sued for a long time after it being installed. Almost no maintenance and repairing problem would occur during its operation period.

float inside the switch case Automatic float switch | for pumps 12 and 24 Volt | up to max. 15 Amperes

Visual / electrical fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI Nominal Sizes and Designs ▪ 5 nominal sizes from 127 mm / 5.00 in to 305 mm / 12.00 in ▪ Display either undivided (SNK 127 ... 176) or subdivided by strut(s) into 2 (SNK 254) or 3 sections (SNK 305) Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Materials ▪ Housing made of Aluminium, black powder coating ▪ Sight tube and plugs made of Polyamide (PA) ▪ Float made of Polyamide (PA) ▪ Sealings made of FPM (Viton®) Special sight tube materials for improved UV or chemical resistance and use with special media (such as bio-degradable fluids, diesel oils, gasolines, etc.) as well as special sealing materials are available on request. Electrical Specifications ▪ Magnetic float activates switch when fluid level drops below contact level within 60 mm / 2.36 in of lower banjo bolt ▪ Available as a break contact...

– Connection cable 4 meters with plug – Sieve installed in the water inlet – Bypass incl. Pressure gauge installed in the device – Float switch installed for low water alarm – MicroGroove condenser (micro-channel filter, as sensitive to dirt) Terminal– Evaporator: copper plain tube coil – A series for min. outlet temperature of -5 ° C. – Many possible configurable and already assembled e.g. overflow protection – Made in Germany!

Key data: Sewage Pumps VAG, rubber mounted with mixing nozzle Suitable as waste water lifting system For pit depths up to approx. 4 m Three-phased motor 2.2-3 kW with switch and 16 A CEE device plug Outputs up to max. 1,000 l/min. The Eisele VAG vertical waste water and slurry pump with mixer cap is characterised by its robustness, that is maintenance-free and its operational safety. Can be used in cellar, collection and sedimentation chambers, in combination with a float switch it protects against flooding and has an output up to 1,000 l/min.

Pressure transmitter PASCAL CVfor general applications, Type series CV3100, CV3101 Modular pressure transmitter with internal or flush-mounted diaphragm Output signal: ● 4…20 mA ● HART® protocol (rev. 6), option ● PROFIBUS PA, option Function modules ● Multifunctional display with 5-segment digital display and bar graph ● Switching module with 2 floating channels, maximum 0.5 A switching current, electrically isolated at all sides, without additional auxiliary power Function module replacement on site without recalibration “plug and measure” Limits of measuring range 0…80 mbar to 0…400 bar Accuracy: ≤ 0.15 % Turndown 5:1 Degree of proctection IP 66, piezoresistive measuring cell directly aerated Options Explosion protection for gases and dust Classification per SIL 2 Inspection certificates; material certificate and calibration certificate as per DIN EN 10204-3.1 Degree of protection IP 69K

Pressure transmitter/Pressure switch PASCAL CSfor general applications, Type series CS2100 Multifunctional pressure transmitter/pressure switch Degree of protection IP 65 4 digit LED display, can be mirror-imaged by 180° Indication module can be turned through 300° Measuring ranges 0…100 mbar to 0…40 bar rel., 0…1 bar to 0…6 bar abs, High pressure 0…60 bar to 0…400 bar Output signal 4…20 mA, 2-wire technology Accuracy: ≤ 0.2 % Easy to program locally (as per VDMA standard) Galvanic isolation between transmitter and switching outputs Various process connections Options 2 floating contacts Switching contacts with high switching current (1A) Inspection certificates - material certificate per DIN EN 10204-3.1 - calibration certificate per DIN EN 10204-3.1 Electrical connection rotatable by 300° Degree of protection IP 67

Colloide designs and builds a variety of pumping systems for our clients, pumping anything from pure water through to heavy slurries. As a process engineering contractor, we will develop the package which is the best fit for the purpose. It will have one or more pumps at the core, but with ancillary equipment designed into the system. Variances include: A variety of pump types such as submersible/dry well end suction/progressive cavity/ vertical multistage etc. Pipework in stainless steel, ductile iron, galvanized mild steel, epoxy coated steel, UPVC, ABS, MDPE… Control panels in a range of standards with optional data logging, alarms, remote monitoring, etc. Level controls such as ultrasonic level contollers, float switches, pressure transducers.