Flange adapter - Import export

PARTS FOR MOUNTING AND SERVICING HYDRAULIC SYSTEMS Locked flange adapter for PE pipes and hoses BMAIN CHARACTERISTICS - Made of ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Pressure rating: 10 or 16 bar - For PE pipes - ISO PN10 and PN16 drilled flanges up to DN150, from DN200, ISO PN10 or PN16 drilling to be specified. or PN16 drilling to be specified - Complies with EN 545 - A.C.S. certified product

Planetary gearing for stepper motors of the NEMA 23 and NEMA 34 size. Suitable for all mounting positions. Maintenancefree thanks to lifetime lubrication. The planetary gearing is selfcentring, equipped with a flange adapter system and axial length compensation.

Mounting plate steel/plastic. Monitor bracket aluminium. Bearing washers and sleeves plastic. Mounting flange aluminium. Mounting adapter aluminium. Screws steel. Version: Mounting plate painted. Monitor bracket painted. Mounting flange painted. Mounting adapter painted. Screws electro zinc-plated

This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque.

Category Screw connections, adapter a. accessories / Flange screw connections / SAE flanges / Flange halves / 6.000 PSI / Stainless steel Product number supplier 424775000v

Test bench couplings are applied in miscellaneous test benches. By reason of manifold, specific requirements TOK system is designed according to the modular design concept, to be applicable on almost every engine test bench. For specific requirements, e.g. special-test benches, the standard parts can be combined with specific-designed parts to derive solutions corresponding to individual conditions. Advantages of the TOK-ZW coupling system: Lowest possible torsional stiffness utilizing two flexible elements Simple adjustment of the torsional stiffness by changing of elements Compensation of axial-, radial- and angular misalignment Self-centering, backlash-free and maintenance-free Flanges adapted to DIN or SPICER bolt patterns, respectively on demand Variable installation lengths utilizing telescopic spacer shafts Ideal for highest speed Lowest possible weight by using high-tensile aluminium and CFRP We are glad to see that you are interested in our product line and are happy...

Potentiometric displacement sensors are used for direct, precise measurement of mechanical displacements. The mechanical parts of the measuring equipment must be set-up in such a way that the sliding shaft can move without play or lateral forces. A special multi-finger slider ensures good contact even when the adjustment speed is high or in the presence of vibration. With its housing diameter of only 12.7 mm, the model 8709 is also suitable for highly compact structures. The movable fastening clamps allow the user variable options for attaching the sensor without complication. Optionally available adaptations, such as flange and ball joint versions, extend and complement the range of possible applications. Typical fields of application include: Measuring the stroke on riveting machines Measuring insertion distances Offset measurements on bearings Spring travel measurements on axes Measurements of the movement of hoisting platforms Length measurements on pipe bending machines

The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.

Electric duct heater Electrical duct heater type “LEH-R” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with adapters to flanges DIN EN 1092 Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

The AVK Orion program consists of a wide range straight couplings, flange adapters, spigot couplings and reducer couplings. These are universally applicable to steel, cast iron, AC, PVC and PE pipes with an outside diameter of 46 to 358 mm. A coupling per nominal size.

AVK recommends usage of support bushes in the PE pipe when using a tensile coupling or flange adaptor such as an AVK combi-flange and a Supa Plus™ or Supa Maxi™ coupling. AVK support bushes are made of stainless steel AISI 304 and are standard available for SDR 11, SDR 13,6, SDR 17 and SDR 17,6 PE pipes. Other SDR classes on request.

Cost effective installation and dismantling with only a few tie-rods Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment Designed with a gland ring to apply compression on the seal Standard total axial adjustment of 50mm (+/- 25mm) Flange adapter and follower (gland ring): ≤ DN300 GGG ≥ DN300C-steel S275JR F-piece: C-steel S275JR Flange adapter: raised face and reduced bore F-piece: raised face and full bore. Fusion bonded epoxy coating RAL5015, min 250 mμ Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4

Adduction head under the head Useful passage 50 mm Male or female output shaft Suitable for all drilling machines with small internal passage Can be installed on any type of drilling rig Adaptable attachment flange

The DK37 M8 is a variable area (VA) flowmeter with electrical signal output and bargraph indication or mechanical indicator with two optional limit switches. The versatile all-metal measuring device is suitable for flow measurement of gases and liquids. Due to its sturdy design, the VA meter can be used at temperatures up to +200°C / +392°F or pressures up to 220 barg / 3190 psig. It is fitted with a needle valve as standard to accurately set the flow value. The DK37 M8 comes with vertical or horizontal process connections for NPT or G thread, flange adapters and many other connection options. To provide constant flow rates in case of variable inlet or outlet pressures, the VA meter is also available with flow regulators. It has approvals for hazardous areas and is suitable for use in Safety Instrumented Systems (SIS).

This deflectable pneumatic spindle is capable of compensating part and positioning tolerances when machining. This means that it is possible to trace a part contour with constant pressure and achieve uniform removal, even under fluctuating conditions. An optimum application for this system is, for example, the automated deburring of castings or machined components using an industrial robot. Adaptor flange (Order no. 003 012 557) to simplify the mounting of the system is available directly from us. The deflection force is individually infinitely adjustable using air pressure (2-6 bar), even during processing. This enables the removal rate to be perfectly adapted to the thickness of the burr. After deflection the pressurized air piston always returns the tool to the zero position against a positive stop. Hysteresis zero.

Designed for high performance and reliability, our Subsea Pulling System provides the following benefits: Compact design Long Piston Stroke - 4" (102mm) 10,000 psi (700 bar) systems Rapid assembly using Quick Release Reaction Nuts High strength threaded bar Anti-Slip surfaces Operated via separate diver control valve providing precise control for up to 4 pullers Compact Design Designed to fit ANSI B16.5, MSS SP44, API 6A and most other flange applications dedicated flange hole adapters. Hydraulic Anchor Collet Release Anchor collet automatically grips wire rope (without hydraulic pressure). Collets can be fully released by applying hydraulic pressure. Auto Advance Collet Release Advance collet fully disengages when the pulling cylinder is fully retracted Manual Retract Collet Release Retract collet can be manually disengaged, allowing the pulling cylinder (including Advance and Retrace collets) to be removed from the wire rope while the rope is installed in the flanges. Also...

MRT MANUAL RETURN BOLT TENSIONER Our economy range of bolt tensioners offer low-cost tensioning solutions. Incorporating our unique quick-release bridge adaptation, a range of adapter kits provide maximum flexibility. Piston stroke limit indication Piston/cylinder misalignment compensation Bolt coverage from 1" to 3-1/2" with just 6 tools Designed to fit BS1560/ANSI B16.5/API flanges Unique quick-release bridge adaptation Application specific tooling available. Contact factory for details. Piston stroke: 15mm (excluding MRT1 - 10mm) Max tool pressure: 21,750 psi (1,500 bar) Bolt protrusion above nut: 1 x bolt diameter ‘D’ includes an allowance for tool removal after bolt tightening with 15mm tool stroke Weight excludes puller sleeve To make a complete MRT Tensioner, choose an Adapter Kit and a Load Cell. Semi-compatible with SRT tensioners. Only compatible with SRT Bridges; NOT puller sleeves. SRT Puller Sleeves cannot be used with MRT Load Cell.

Block Body Ball Valves with SAE Flange Adapters BBV22/BBV23 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ With standard and extended SAE split flange connectors according to ISO 6162-1/2 and SAE J 518 C ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating. Forged Body Ball Valves with SAE Flange Adapters FBV22/FBV23 ▪ Two-way high-pressure forged body ball valves designed for use as on/off devices for hydraulic applications ▪ With standard and extended SAE split flange connectors according to ISO 6162-1/2 and SAE J 518 C ▪ Pressure range: up to 420 bar / 6000 PSI (depending on size and material combination of the ball valve) Please note: The final maximum working pressure is determined by flange and pipe/tubing rating.

HDPE FLANGE ADAPTOR INJECTION MOULDED PE100 SDR11 PN16 SDR17 PN10

Adapter sleeve flanged for clamping ring

and HSK-25 tool interface. To meet the ever growing demand for compact and process-reliable high-frequency spindles – for micro chipping applications in dental and medical technology, as well as in the fabrication of molds and tools – our experienced engineers have developed the SD4064 spindle. Compact design, resulting in less weight High-performance motor thanks to synchronous technology Consistent torque from 500 rpm. Motor feedback - SIN / COS sensor Maximum motor mount rigidity Highest possible concentricity <2µm Flange adaptor upon customer request Optional dilatation sensor Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Sedir Automotive can supply following product ; "Metric & UNF" Hose Adapters Ball-and-socket Joint Elbow Blind Plugs Brake Bleeding Nozzle Brake Hose Adapters Conical Nuts (Brass) Double Ended Hose Connectors Female × Female, Hexagon Coupling 316 Precision Instrumentation Pipe Fittings Fuel Pipe Connectors Flared Hose Adapters Flare Nuts Flanged and Exhaust Nuts Fuel Pipe Connectors and Elbows Gradual Ferrule (Brass) Hose Ferrules (Brass) Hose Ferrules (Metal) Internal Flared Hose Adapters Hydraulic Tube, Weld Union, Connector Hose Tee Connectors (Hosetail) Hose Fitting Caps (Brass) Male x Female Extended Hydraulic Adapter Metal Reduction Pipe Adapters R" - NPT" Hose Adapter Tipper Coupling Female Socket Sheet Iron Sleeves