Fire rated - Import export

We offer fire- and smoke-rated doors of all types: metal and wood. According to ITM regulations: EI 2 30 s, EI2 60 s, EI2 90 s, EI1 30 s, EI1 60 s, EI1 90 s. Doors combining several criteria: acoustic, thermal, burglar-proof, armoured. Doors guaranteed for up to 10 years with an opening and closing cycle of up to 1,000,000 cycles. Fireproof sliding doors. Consult our professionals You can discuss with us and we can draw up an estimate together to find the best solution for your security.

The FDABURML coupling module is a combination of an air valve and a fire damper, coupled with a single housing. This is an alternative to typeical fire valves. The main advantages of the FDABURML are better fire rating and a smaller size with more product configurations and application options. The main component of the coupling module is the CFDM fire damper. The fire damper is available in Ø 100, 125, 160, and 200 mm. The wing blade of the damper provides a very low resistance to the air flow. The fire damper can be ordered with one or two optional limit switches to feed back the actual blade position. The FDABURML coupling modules match the most popular versions of air supply or exhaust valves which can be replaced with one another, even with the coupling module installed in a partition or already in use. The entire coupling module is compact. As a result, the air valves with the mounting frames cannot exceed 50 mm in height.

Fire-rated access doors could be mounted on ceiling or walls. They provide access through openings for electrical or plumbing or other places. Two resistance classes produced: EI2 30 and EI2 60, regarding EN 13501-2 in case of fire it retains integrity and heat insulating properties, respectively at least 30 or 60 minutes. It has the necessary documents confirming compliance. Fire-rated access doors are made from 1mm galvanized sheet steel and powder coated RAL9010. The doors have universal locking. A wide choice of sizes.

have been tested in accordance with BS476. The fire rating was rated by BRE at the Technical Center (Test Report No TE85423) at 4 hours ½ hour to a maximum size of 4000mm wide and 4000mm high. The special door, which is wrapped in a spiral, closes automatically in cases where the room temperature exceeds 65` at the time of fire, making the fire area isolated.

Suspending Ceilings An exposed white metal lay in ceiling grid supporting a drop in mineral fibre board tile. These are normally fire rated to underside of mezzanine. Column Cases Used to fire rate the columns of the mezzanine a one hour column case is constructed of 20mm Promalit or equivalent. Supplied in galvanised, white polyester or PVC, powder coated to match décor. Fascia One hour fire rated fascia constructed from ‘Glasroc’ multi-board. Fitted to all exposed edges of the mezzanine.

Solid Used to provide offices within production or factory areas. Can be fire rated and built incorporating windows. Mesh Invariably used to create a secure area for valuable stock.

Dimensions Length 180 mm Width 140 mm Height 125 mm Materials Box ABS Cover ABS Seal TPE Cable gland TPE Screw Galvanized, DIN 7981-C 3.5x19 Other attributes Entries not specified Protection degree IP54 Rated insulation voltage AC AC -690V Fire protection HB Rated cross section 4 - 10 mm2 Heavy metals-free Yes PVC-free Yes Color White Quantity in pack 4 Equipment 2 cable glands PG21

Bondex sponge is preferred as a sound insulation sponge suitable for use in noisy places where there are a lot of sound waves. It is obtained by dissecting recyclable waste sound-deadening insulation sponges in special machines and then reassembling them. The fire retardant rate and sound insulation level can be adjusted according to the insulation sponges used inside. While it is used as an impact and vibration absorber on parquet and under-screed floors during sound insulation and sound insulation installation, it is also preferred to provide insulation on walls and ceilings thanks to its high density and sound deadening.

Bondex sponge with barrier is one of our sound insulation sponge models suitable for use in noisy places. Bondex sponges are obtained by cutting the recyclable waste sound-absorbing insulation sponge into pieces and then compressing them again. The fire retardant rate and sound insulation level are adjusted according to the insulation sponges and other additive products used. The barrier used between the two sponges is a PVC sound insulation barrier with double-sided felt. It is used as an impact and vibration absorber on parquet and under-screed floors in sound insulation and isolation projects. Thanks to its high density, it is sound deadening and is preferred to provide insulation on walls and ceilings.

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The FDA12 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification f construction products and building elements). The fire resistance was tested as per PNEN 136622001P (Fire resistance tests for service installations Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA12 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN100, DN125, DN160, DN200, DN250, and DN315. All fire dampers have a pull spring control gear and a fusible thermal trip (in FDA12T) or a returnspring actuator coupled with a thermal trip (in FDA12M).

The FDA212 square fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal sizes 160x160 – 1000x500 mm. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630.

The FDA212 round fire dampers are designed for use in general ventilation systems to seal off smoke and fire between adjacent fire partitions. The fire dampers are classified according to EN 135013+A12010P (Fire classification of construction products and building elements). The fire resistance was tested as per PNEN 1366 22015 (Fire resistance tests for service installations — Part 2 Fire dampers). The entire manufacturing process meets the requirements of EN 156502010. The FDA212 fire dampers can be installed in horizontal and vertical fire partitions to provide fire resistance of EI 120 (ve ho i↔o) S (which may depend on the actual fire resistance of the partition). The fire dampers are available in the nominal diameter sizes DN200, DN224, DN250, DN280, DN300, DN315, DN355, DN400, DN450, DN500, DN560, DN600, DN630. All fire dampers have a torsion spring trip (in FDA212T) or a returnspring actuator coupled with a thermal trip (in FDA212M).

Doorsorba acoustic doors are extremely high performance sound reducing timber doorsets. These high quality doorsets are available in a wide range of finishes and are fire rated. Used in areas which require high sound reduction performance such as theatre, radio/TV studios, music rooms, interview rooms, cinemas, schools and confidential offices. Acoustic Performance Installation DOORSORBA acoustic doorsets are installed in a similar manner as normal timber doors. Doorsets are supplied at a moisture content of 6-12% and should not be brought on site until conditions are suitable. Wet trades should be complete and the building dried out and brought to normal working room temperature. DO NOT build-in or install frames as first-fixings. 1. Check the sizes of the doors, the frames and the openings prior to starting installation. Only skilled tradesmen should undertake installation as correct fitting door/frame is imperative. 2. Frames should be fitted to the supporting construction...

FOAMSORBA are extremely lightweight foam sound absorbing panels. They are designed to be glued onto existing or new ceilings and high level wall surfaces. They have virtually no weight and are simple to fix. They are fibre and CFC free as well as having excellent fire ratings. Foamsorba panels are used with great success in applications such as television studios, offices, community and multi-purpose halls, cinemas, classrooms, hallways, music rooms and shooting ranges etc. for sound absorption. Acoustic Performance Installation FOAMSORBA acoustic panels are simply adhered to ceilings and upper walls using Gluesorba Contact spray can adhesive. It is important to check the construction detail of the backing surface structure (ceiling or wall) to which the acoustic panels are to be glued. The FOAMSORBA panels have a thermal conductivity of 0.034 W/mK at 10 C and therefore have good thermal insulation properties as well as excellent sound absorption. It is therefore important to...

Wavesorba acoustic tiles provide high noise absorption for areas such as high-tech offices, airports, schools, entrance areas, music or television studios and retail stores. Wavesorba s acoustic tiles comprise of high performance acoustic fire-rated foam which is upholstered with a multitude of, soft, soothing colour acoustic fabrics. The fabric is covered on the face and edges and returns approx. 2 inches to the back. Wavesorba sound absorbent tiles are available in 18 different colours. Acoustic Performance The installation time is fast as the Wavesorba panels are suspended by steel wires from the soffitt by means of special spiral hooks which are fitted in the rear of the acoustic panels. The depth in suspension is simply adjusted by adjusting the length of the steel suspension. This also allows the acoustic tiles to be installed at sloping angles if required again adding to the visual design possibilities. The spiral hooks should be placed between 200mm and 300mm from the...

Wallsorba are high specification acoustic wall panel systems. These are the most popular aesthetic sound absorbing wall panels. They are durable, fire rated, visually pleasing and offer excellent acoustic performance. They are the decorative solution to your sound control needs. The wall panels are used extensively to transform areas such as multi-purpose halls, open-plan offices, conference suites, studios and interview rooms into workable environments. Panels are finished in high quality acoustic fabrics available in 80 various colours. Three standard panel versions are offered. Acoustic Performance Installation Tee Joint Panel System This is the most economical panel utilising white Upvc fixing sections. The panels have cut edges on all four sides. The Upvc sections serve two functions. One is to decoratively mask the edges and the other is as structural fixing sections. This system is the most flexible as panels can be cut on site to suit wall dimensions. Butt Joint Panel...

A unique assembly of special textile panels and various closing/attachment systems to guarantee: Ultra-fast and simplified installation and removal without the need for tools. Efficient and long-lasting protection for your equipment. Improved MTBF (Mean Time Between Failures) and MTTR (Mean Time To Repair) thanks to quick access to the welding gun, thereby saving valuable time during maintenance operations. Optimized operating costs through easy replacement of worn parts only. They are untearable and electrically insulated, and are guaranteed halogen-free and silicon-free. The coatings on the two sides prevent the fabric from soaking up any water or oil in the event of leakage. Limited splatter adhesion and M1 fire rating classification complete the high level requirements.

Fire Exit doors have fire resistance certificate for 60 minutes, 90 minutes, 120 minutes. They have Panic bars, Glass(optional), lock from outside and options for variable colors.

We can produce any kind of acoustic panels from polyester fiber felt. The differences from competing companies is we are producer of our raw material and all production finish in our factory from raw to finished product. All of our products producing from up to %100 recycled material and our main factory using solar energy for manufacturing. Our Pet Felt Panels are 3 different types ; 1- Natural Color (gray, Dark Gray, Antracite, Black, White) 2- Felt Fabric Covered (up to 300 different color) 3- Full Colored Pet Felt Panels (any color you want) For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : 6mm to 30 mm thickness Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material

We can produce any kind of acoustic panels from polyester fiber felt. The differences from competing companies is we are producer of our raw material and all production finish in our factory from raw to finished product. All of our products producing from up to %100 recycled material and our main factory using solar energy for manufacturing. For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material Our Products related this topic : Acoustic Wall Panels (color , natural colors, 3d) Acoustic Wall Boards Perfored Acoustic Wall Panels Digital Printed Felt Wall Panels Wall Covering Solutions

A Carefully Selected Collection There are many ways to create your ideal space. The basis of the FeltBi Geo system. These gorgeous little pieces eliminate unwanted noise, help organize your life, allow you to express yourself, and best of all, they’re made from recycled plastics! Our Geo Tiles are 3 different types ; 1- Natural Color (gray, Dark Gray, Antracite, Black, White) 2- Felt Fabric Covered (up to 300 different color) 3- Full Colored Pet Felt Panels (any color you want) For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material Our Products related this topic : GEO Series Rectangle Square Circle Semicircle Quadrant Triangle Hexagon Tile Cross

We can produce any kind of acoustic Felt Fabric from polyester fiber felt. The differences from competing companies is we are producer of our raw material and all production finish in our factory from raw to finished product. All of our products producing from up to %100 recycled material and our main factory using solar energy for manufacturing. For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material

We can produce any kind of acoustic Curtains from polyester fiber felt. The differences from competing companies is we are producer of our raw material and all production finish in our factory from raw to finished product. All of our products producing from up to %100 recycled material and our main factory using solar energy for manufacturing. For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material Our Products related this topic : Acoustic Lineal Curtains Acoustic Jalousie Curtains Acoustic And Sound insulation Curtains

We can produce any kind of acoustic dividers from polyester fiber felt. The differences from competing companies is we are producer of our raw material and all production finish in our factory from raw to finished product. All of our products producing from up to %100 recycled material and our main factory using solar energy for manufacturing. For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material Our Products related this topic : Acoustic Hanging Separators Pedestal Separators Desk Dividers

We can produce any kind of acoustic panels from polyester fiber felt. The differences from competing companies is we are producer of our raw material and all production finish in our factory from raw to finished product. All of our products producing from up to %100 recycled material and our main factory using solar energy for manufacturing. For getting informations about our product please check out our catalog, website or contact with us. Certifications : Reach , RoHS , Oeko-Tex , CE, DINN (Fire Reaction Class), UTO, TSE General Features : Up to 1.00 NRC (Aw Rate) Bs1D0 Fire Reaction Class Doesnt effect from water Healthy (Reach) up to 100 years lifetime up to %100 recycled raw material Our Products related this topic : Acoustic Baffle Acoustic Canopy (Hanging Ceiling Panels) Ceiling Acoustic Panels for T24 Acoustic Ceiling Covering Products Ceiling Curtains (for fixed or pergola systems)

BIEGLO's sales portfolio for PEI contains also sheets from 8mm to 100mm as well as, PEI thin films below 1mm thickness are also available and the maximum width is 1200mm for sheets and film. Polyetherimide is an amorphous thermoplastic and part of the polyimide family. It has excellent dimensional accuracy over a wide temperature range and has low thermal expansion. PEI is naturally flame retardant and has a fire rating of UL94 V-0. The most common applications of PEI are in the food and beverage industry, pharmaceutical and electronics industry as well as precision engineering.