Fire panels - Import export

This hightech membrane is suitable for full fire protection and stopping as well as smoke, with extended performance for higher temperatures, strength and flex performance.

With our product range of solidian PROTECT A1 membranes, we provide architects and planners with important components to realize their ideas and build safely. This protection membrane is certified to building material class A1 and therefore classified as noncombustible to EN 135011 reaction to fire. nonflammable fabric made of glass or basalt excellent solar and glare control characteristics maintenancefree weatherproof water repellent UV Protection

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Fire protection panel on stainless steel Z-brackets, fire-resistant seal. Features: Accurately-manufactured smell proof access cover. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. Fire test certificate: The Austrian test certificate issued by the Institute for Fire Protection Technology and Safety Research (IBS) confirms that HAGODECK Type BV-F90 steel resists a fire for 90 minutes and thus significantly contributes to safety in the event of a fire. In accordance with EN 13501-2, Type BV-F90 is classified in fire resistance class REI 90 (a ↔ b). The Lift-Off opening system: Every HAGODECK Type BV-F90 steel cover comes with a set of lifting keys and precise installation instructions. After lifting out the cover, the fire protection panel can be removed using its grab handle. The shaft is...

Features • Quick processing with mounting pliers (can also be mounted without) • For shallow cavity depths • Wall plug cap with anti-rotation lock prevents rotation in the building material • Suitable for single and double layer wall panels Description & Area of Application • Galvanised metal cavity wall plug with wall plug cap, rotation locks and metric screw with hexagonal (SW13) or crosshead driver • When the wall plug is put in place, the expansion segments are widespread on the rear of the panel • Fire resistant to DIN 4102 (class A1)

Hygienic acoustic panels made of high density glass wool with suspended ceiling panel, a special glass fiber texture with antibacterial front surface, and a back side with glass fiber. Edge Details is off. HYGIENE with acoustic suspended ceiling panel with high fire resistance level is resistant to moisture. It can be used to provide acoustic insulation in foodhouses with no danger of human health. Hygienic ceiling panels are for healthcare areas, clean rooms, laboratories and doctor and dental surgeries. They are manufactured to the highest standards and will withstand regular industrial cleaning. Certain tiles are finished with a Bioguard paint which contains fungicides and biocides; which combats harmfull growths.

Polo Black Suspended Ceiling Panels Polo Black suspended ceiling tiles produced by using medium density glass wool with suspended ceiling panels. It consists of a plate covered with painted glass fiber texture to create a decorative ceiling. Acoustic suspended ceiling panels with aesthetic appearance that can be designed according to your product positioning preference can be used to improve interior acoustics. Usage Areas Black suspended ceiling panels can be used to hide open installations in ceiling systems. T24 carrier system can be installed with the desired axis spacing. The Polo Black suspended ceiling tiles is an effective range of acoustic tiles, for damping the sound reflected from the ceiling surfaces especially for theaters, conference rooms, offices and hospitals. Acoustic suspended ceiling with high level of fire resistance Because POLO with panel is resistant to moisture, it can be

Acoustic Ceiling Tiles Polo suspended ceiling panels are produced using medium density glass wool. It consists of a plate covered with painted glass fiber texture to create a decorative ceiling. Acoustic suspended ceiling tiles with aesthetic appearance that can be designed according to your product positioning preference can be used to improve interior acoustics. Usage areas Polo suspended ceiling tiles can be used to hide open installations in ceiling systems. T24 carrier system can be installed with the desired axis spacing. Especially for cinema halls, conference halls, offices and hospitals, it is a kind of effective acoustic tile for damping the sound reflected from the ceiling surfaces. Since the POLO product with acoustic suspended ceiling panel with high fire resistance level is resistant to moisture, it can be used to provide acoustic insulation in foodhouses together with shelter from

Snow suspended ceiling panel, for decorative ceiling view, named parmetex front panel is specially painted glass fiber fabric, back side is coated with glass, high density glass wool is produced using a panel. Edge details can be closed. Snow ceiling tiles product with acoustic suspended ceiling panel with high fire resistance level is resistant to moisture. It can be used to provide acoustic insulation in foodhouses with no danger of human health. Acoustic suspended ceiling panels with aesthetic appearance that can be designed according to your product positioning preference can be used to improve interior acoustics. Snow acoustic tiles is a thinwalled ceiling covering with suspended ceiling panel, offering endless solutions with a large Ral option. It is a solution for areas where it is important to easily disassemble the plates and it meets the general acoustical requirements of your office.

Addressable fire alarm control panel with 2 loopsIntended to protect premises of any size. This is a new look at fire safety: a modern software and hardware platform, high technologies, an affordable price and impressive capabilities that are not characteristic of any domestic analogue.

Fire Resistant Plasterboard Type DF consists of gypsum core reinforced with special additives and clay, enclosed between special paper for enhanced fire resistance. Application: • Ceiling • Wall • Areas with higher requirements for fire protection such as evacuation corridors, stairways, industrial premises, etc. Ideal for indoor use in areas with normal humidity up to 60% Advantages: • High density of gypsum core for better sound insulation and stability Type D • Increased resistance to high temperatures Type F • Easy to cut and mount TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000-3000 10.00 60 pcs 15 1200 2000 12.50 50 pcs

FOAMSORBA are extremely lightweight foam sound absorbing panels. They are designed to be glued onto existing or new ceilings and high level wall surfaces. They have virtually no weight and are simple to fix. They are fibre and CFC free as well as having excellent fire ratings. Foamsorba panels are used with great success in applications such as television studios, offices, community and multi-purpose halls, cinemas, classrooms, hallways, music rooms and shooting ranges etc. for sound absorption. Acoustic Performance Installation FOAMSORBA acoustic panels are simply adhered to ceilings and upper walls using Gluesorba Contact spray can adhesive. It is important to check the construction detail of the backing surface structure (ceiling or wall) to which the acoustic panels are to be glued. The FOAMSORBA panels have a thermal conductivity of 0.034 W/mK at 10 C and therefore have good thermal insulation properties as well as excellent sound absorption. It is therefore important to...

STIFERITE FIRE B a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on one side by a mineralized fibre glass facers, and the other, to be positioned on toward the side more exposed to the risk of fire, by fibre glass with additional mineral fibre named STIFERITE FIRE B facer®. Specifically suggested for insulation of ventilated facades (it meets the requirements of the Technical Guide of “Anti fire safety requirements of facades in residential buildings” dated 15/04/2013). The FIRE B panel is suggested for Insulation of walls as in “ventilated facades”. Insulation for all applications where elevated fire reaction performance as in organic material insulation is required. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Fire-rated access doors could be mounted on ceiling or walls. They provide access through openings for electrical or plumbing or other places. Two resistance classes produced: EI2 30 and EI2 60, regarding EN 13501-2 in case of fire it retains integrity and heat insulating properties, respectively at least 30 or 60 minutes. It has the necessary documents confirming compliance. Fire-rated access doors are made from 1mm galvanized sheet steel and powder coated RAL9010. The doors have universal locking. A wide choice of sizes.

Fire Exit doors have fire resistance certificate for 60 minutes, 90 minutes, 120 minutes. They have Panic bars, Glass(optional), lock from outside and options for variable colors.

We supply and install high-end acoustic timber panel solutions that perfectly fits into any kind of environment, enhancing its reverberation and acting as a noise reduction barrier. Perfect for ceiling and wall mounting, they not only become a boost to the noise managing of an environment, but can be also a great decorative feature that will give that extra “wow” effect. Especially recommended for commercial, offices and retail spaces (restaurants, pubs, coffee shops etc.) these timber panels are also perfect for residential projects. All our panels are fire rated with the highest Euroclass available for wooden products (B-S2,d0) thanks to the treatment all our panels receive during manufacturing. There are different shapes in which these panels are manufactured to function as a noise barrier and to absorb reverberation.

The mains free vacuum lifter with battery power for laying roof panels at outdoor area is a solid worker in your team. The CLAD-BOY® are build according the actually safety regulations EN13155 for lifting devices at building site. We guarantee the highest quality "Made in Germany"! Previous Next The benefits at first sight To mount roof panels or fire protection panels, profiled sheetings and wall panels you only need one basic device with addtional options. Tool-free adaptation options Careful with material Integrated charging unit Space saving transportation Cladboy transporter Highest laying rate with reduced manpower Mains-independent energy unit Specialmaintenance-free batteries which do not run out Compact, sturdy construction site quality functionally-relevant - Modules are protected or of a strengthened design Swivel unit 0 – 90° for laying wall elements Energy-saving vacuum-controlled motor circuit with digital vacuum sensor High-quality, UV-resistant suction plates...

The mains free vacuum lifter with battery power for laying wall panels at outdoor area is a solid worker in your team. The CLAD-BOY® are build according the actually safety regulations EN13155 for lifting devices at building site. We guarantee the highest quality "Made in Germany"! Previous Next The benefits at first sight To mount roof panels or fire protection panels, profiled sheetings and wall panels you only need one basic device with addtional options. Tool-free adaptation options Careful with material Integrated charging unit Space saving transportation Cladboy transporter Highest laying rate with reduced manpower Mains-independent energy unit Specialmaintenance-free batteries which do not run out Compact, sturdy construction site quality functionally-relevant - Modules are protected or of a strengthened design Swivel unit 0 – 90° for laying wall elements Energy-saving vacuum-controlled motor circuit with digital vacuum sensor High-quality, UV-resistant suction plates...

The mains free vacuum lifter with battery power for laying roof panels at outdoor area is a solid worker in your team. The CLAD-BOY® are build according the actually safety regulations EN13155 for lifting devices at building site. We guarantee the highest quality "Made in Germany"! Previous Next The benefits at first sight To mount roof panels or fire protection panels, profiled sheetings and wall panels you only need one basic device with addtional options. Tool-free adaptation options Careful with material Integrated charging unit Space saving transportation Cladboy transporter Highest laying rate with reduced manpower Mains-independent energy unit Specialmaintenance-free batteries which do not run out Compact, sturdy construction site quality functionally-relevant - Modules are protected or of a strengthened design Swivel unit 0 – 90° for laying wall elements Energy-saving vacuum-controlled motor circuit with digital vacuum sensor High-quality, UV-resistant suction plates...

Combined disabled refuge EVC, disabled toilet alarm, fire telephone and building alarms system, controlled and monitored from a single fire panel sized enclosure. All control boards, PSUs, batteries, etc. mounted inside the monitoring station. Simply connect mains and outstations for a complete system. Saving money, installation cost, space etc. Remote monitoring and third-party interfaces over serial / IP / fibre available

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

We can deliver at last-minute rockwool panels (A-grade production and B-grade surplus stock) for sound insulation and fire protection. Rockwool or mineral wool panels are sandwich panels whose sheets are connected firmly with rockwool insulation. These panels are therefore highly resilient composite panels that have both load-bearing and insulating functions. The panels insulation are made of around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid vertically and horizontally due to its end joints. These panels can also be used for basic insulation of existing buildings. Building material classification according to EN 13501-1 A1 or A2 for a non-combustible material B, C, D, E for a combustible material, where B is lowest combustibility. A1 is the highest class and is not combined with any additional class. The other classes are always combined with the following additional classes which indicate the product's ability to produce smoke and flaming droplets and particles. s1 – the structural element may produce a very limited amount of combustion gases s2 – the structural element may produce a limited amount of combustion gases s3 – no requirement for limited production of smoke d0 – flaming droplets and particles may not be produced by the structural element d1 – a limited amount of flaming droplets and particles may be produced by the structural element Panels with rockwool insulation can also ensure peace in operation. With its core material properies, the panels can offer first-class sound absorption values, and good themal insulation The acoustic perforations on the flat inner surface of the panels means that they should only be used for inside walls, as the outside sheet is not air-tight. On request we can offer you a range of fire protection or acoustic panels made to your requirements in length, thickness and most RAL-colour tones. We are also able to offer special price products and cancelled orders.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

For commercial buildings, coldrooms, Panelsell are able to supply sandwich panels quickly and in large quantities. Insulated sandwich panels (also known as insulated sandwich boards, or composite panels) are essentially two profiled metal sheets with an insulated layer material in between. Standardly, the outer sheets are made from steel. However, for special purposes, stainless steel or aluminium can be incorporated. The standard sheet thicknesses range between 0.5mm to 1.0mm. Therefore, it can be produced in other strengths as required. The wallpanels commonly have the Eurobox-marked profile on the sheet. However, smooth and micro-ribbed surface finishes are also possible. The standard core insulation of these composite wall panels is rigid polyuerethane foam (PU/PUR). Increasingly more popular are panels with a core insulation consisting of rockwool or polyisocyanurate foam (PIR) due to fire-protection requirements. The panels would have fire-rating classes, and involves non-combustible materials. The wall panels are assembled together in what is known as a "tongue and groove" system. The panel attachment can come as open or secret fixing. In open-fixing panels, screws that are mounted would be visible, whereas secret-fixing joints would conceal the screws when mounted. On request, we can offer the full range insulated wall panels manufactured new as tailored to your requirements in length, thickness and most RAL-colour tones. Of course, we are also able to offer you alternative special surplus stock items and cancelled orders at low prices.

Fire-resistant composite sandwich panel based on basalt and ceramic. CBG SeaPan WP 25/15 offers completely new solutions to the manufacture of cabin walls and bulkheads in shipbuilding, residential and office containers in construction sphere. The use of lightweight composite materials (e.g. with only approx. 7.99 kg/m2 for a wall panel of fire class A-30) makes it possible to significantly reduce the total weight of a construction. ✓ 100% natural and chemically neutral ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant ✓ pressure-resistant ✓ water-repellent ✓ reduce vibration ✓ fire-resistant ✓ nonflammable ✓ recyclable

Composite sandwich panel on basalt and ceramic basis for the production of fire-resistant building constructions. CBG-SeaPan-OEM-50/60 offers completely new solutions for heat, sound and fire protection application. The use of lightweight composite materials makes it possible to reduce the total weight of a construction considerably. - 100% of natural origin, chemically neutral — corrosion resistant — non-flammable — non-combustible — resistant to humidity — antibacterial — recyclable — no smouldering — dimensionally stable

Fire-resistant composite sandwich panel based on basalt and ceramic. CBG SeaPan WP 15/15 offers completely new solutions to the manufacture of cabin walls and bulkheads in shipbuilding, residential and office containers in construction sphere. The use of lightweight composite materials (e.g. with only approx. 5.7 kg/m2 for a wall panel of fire class B-15) makes it possible to significantly reduce the total weight of a construction. ✓ 100% natural and chemically neutral ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant ✓ pressure-resistant ✓ water-repellent ✓ reduce vibration ✓ fire-resistant ✓ nonflammable ✓ recyclable