Final finishing - Import export

It is a material widely used in machinery industry. It is a material with relatively hardness, rigidness, slippery and good mechanical strength values. There are various uses for its gear applications, including wheel construction. However, it is not as hard and abrasion resistant as Kestamid, not as slippery as Pom C. Its chemical strength is moderate, and it is resistant to some acids and bases. The polyamide 6 has the ability to collect water on its own. These features have pros and cons. Pros is that it increases the strength of the part against vibration and sudden impacts. This allzws the dynamic stresses that would otherwise occur during part use to be removed within itself. Cons is that it is difficult to achieve measurement stability in the material. In other words, the material is affected even by the moisture in the air and gets changes in the measurement. The tolerances must be observed before finishing the final processes of the part.

Tyrolit divides the floor grinding process into three parts: rough grinding, pre-polishing, and polishing. In the first two steps, material is removed, and in the third phase, the floor gets its final finish. After each stage, chemical agents are used to densify, seal, or finish the floor. Customers receive these chemicals directly from Tyrolit. In rough grinding, material is removed based on the desired final appearance. Tyrolit offers metal bond grinding shoes with different grains. Cracks and pores are repaired with a special chemical filler. In pre-polishing, the floor is ground with ceramic/resin bonded tools to level it. A densifier compacts and hardens the surface, reducing water absorption. In the final polishing phase, the floor is sealed with a "sealer" to protect against liquids, grease, and dirt. Tyrolit's floor grinding chemicals transform drab substrates into robust, resilient floors with a long-lasting and appealing appearance.

M-50 is an universal, fast cutting formula of medium fine abrasives with extre­mely uniform particles that gives an ontstanding polishing action for high tem­perature machine buffing. M-50 is developed to simplify all common heavy duty buffing, formulated especially for the preparation and the maintenance of Polyester and Epoxy moulds er surfaces. Developed for quick and easy remo­val of coarse marks and scratches, remaining on the surface after the „wet and dry" sanding procedures. For the final deep gloss finish, OSKAR'S M-100 BUFFING AND POLISHING COMPOUND is recommended. Contains no additives harmful to Polyester gelcoats er Epoxy surfaces. Does not contain silicones or waxes.

The Precision Tube is PAF's top-of-the-range technical product. It is manufactured to EN10305-2 standard and used in the best precision mechanical parts manufacturing plants in Tunisia and Europe. Drawing processes make it possible to obtain tubes specific to each application, by playing on steel grades, mechanical characteristics, reduced dimensional tolerances and final surface finish.

Complete turnkey roll forming machine line according to the finished final product with all necessary equipment, such as uncoiler, feeder, roll former, hydraulic or eccentric presses, stacking unit, etc. We offer standard models of roll forming machines as well as specific models according to the final product requirements of our customers. Some of our standard roll forming machine models are: • Warehouse racks and shelves • Market racks and shelves • Building and construction • C, U, Z, and Sigma (track and stud) • Guardrail • Roll-up door forming machine • Roof panel forming machine • Standing seam • Wall panel • Drywall and plasterboard • Snap lock • Cable tray • Scaffolding Just contact us for any roll forming machine you need, and we will find the optimal solution.

With the FOGS NEO series, Droop+Rein has developed a powerful machine concept for complex machining. The range of services covers processes from machining standard geometries and prefinishing contours to final finishing. For dynamic machining with the highest feed rates, the concept caters for the movement and acceleration of constant masses, regardless of workpiece size and weight. Dynamic and flexible With its new, highly flexible and fast Caxis (±400°), the Droop+Rein FOGS NEO highspeed machining centre is ideal for the complete multifunctional machining of very large workpieces. Of course, the series also features automatic pallet or tool change, tool diameter and length measurement and automatic billing of contour deviations. Thanks to a variety of components and peripheral devices from their modular system, Droop+Rein can create an efficient and processoriented overall system that is tailored to the customer.

Our pigtails and patchcables are manufactured completely according to customer specifications in terms of connector-, cable- and fiber type, quality class, length and color – we can respond to our customers’ wishes accordingly flexibly. All the steps of the connector assembly – from the plug assembly to quality control – are carried out by our highly qualified embloyees under optimal working conditions. Our assembly process consists of several steps, such as exposing the fiber, gluing the fiber in the ferrule and curing. After curing, the connector ferrules are polished in several steps, giving them the final shape and surface finish. The finished connectors then go through our 100% quality control. Each connector gets testet at the insertion and return loss measuring station, as well as the geometric surface quality is measured and documented using an interferometer.

— Inverter welding machine, DC — Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic — Portable, shoulder strap — MMA and TIG lift arc welding — Cellulose electrodes: 100% safe for vertical-down welding — Welding of stick electrodes up to 4 mm — Pulsed MMA welding: — Especially suitable for root welding — Outstanding gap bridging with no sagging of the root side — Fine-flaked weld surface with a TIG look for final passes — Less finishing work thanks to less spatter — Ideal for difficult electrodes — Less distortion thanks to controlled heat input — Pulsed TIG welding with up to 2 kHz — Connection capability for remote control — IP23 spray water protected — Arcforce, hot start, antistick — Energy efficient due to standby mode — 3.5 m mains lead with 16 A earthed plug — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

We are engineered wood flooring manufacturing experts, through the years of experience in this branch of industry we were able to develop unique, dedicated machinery, with our technology, and to offer these unique machines and services that will allow our customers to produce quality finished products. All of the lines that we are able to offer consist of all the machines needed for getting the final product. From cutting the core material, gluing of wear layers, profiling, sanding to final finishing of flooring with oils, stains or varnish (lacquer finish) as well as LED UV Oils and LED UV Varnishes. - We guarantee high quality finished product developed by our many years of experience in engineered wood flooring manufacturing. - Every line can be specially tailored upon buyers special needs and requests. - Depending on the buyer's needs every line always has an option of automation. - When offering new lines we include complete information on technology of production

Marble cleaning and polishing is untouched by special machines. First, the marble is cleared, and then the cleaning is done, and finally, finished off with polishing. Marble needs to buffed and polished because it is a naturally white stone. After polishing the marble, the result is dazzling. You can bring the shine of marble to your house by cleaning and polishing your marble regularl

Raw material: Top quality perfume oils from France. Ready-mixed and ready to use. Needs only normal finishing touches to finalize a perfume (alcohol, fixatives, preservations). Excellent for creating new perfumes, new perfume brands, body products, candles, hair products, etc. The same fragrance oils are used by all top perfume brands. https://amberandoud.com/

BCW Multi Finishing Convolute Wheels Main features and benefits: The open web allow to use coarser grit sized without increasing temperature, loading or glazing, long life, extremely consistent finishing, high stock removal, conformability to the worked piece and cool running. Recommended applications: Satin and cosmetic finishing, uniformed, brushed finish blending machine and belt marks and applying final finishes, removing discoloration from welds, general purpose cleaning, removing rust.

BCW Metal Finish Convolute Wheels Main features and benefits: The dense and durable, but still open web and the strong resin allow uniform finishing but also light deburring operations without changing the dimesions of the workpiece. Long life, extremely consistent finishing, high stock removal, conformability to the worked piece and cool running. Recommended applications: Generates uniform distinct satin, cosmetic, brushed and antique finishes. Blend machine tool marks and apply final finish, blend coated abrasive scratches while applying a burr-free finish acceptable for coating and polishing in one step. Can be used for light deburring applications, removing discoloration from welds, general purpose cleaning, removing rust.