Filtration - Import export

5-stage filtration with coarse, pre and HEPA H-14 filter stage Stationary air purifiers with wall/support bracket for cleaning large areas/rooms Adjustable air outlets for optimum air distribution Scientifically tested and confirmed by Hygiene Institute Timer, automatic CO2 control, virus inactivation and much more possible. Suitable for areas of approx. 250-500 m²

We offer hydro anthracite h In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Crystal-clear pool water with the highest hygienic factor through glass filter medium, resistant against biofilm and bacteria, 99.99% free from contamination, less backwashing due to anti-compaction technology, economical use of pool chemistry, JUST ONE granular size for all filter sizes necessary, FILTRATION up to 10 μ, easy handling 20 kg bags

for liner, build-up and concrete/tile pools, with basket, flange set, skim vac plate d32/38, flange, M5 thread inserts A4 (SS316), screw set, sealing, reductions 2“/1½“ and overflow connection d50. Incl. notch for niveau sensor. Recommended flow rate 8 m3/h.

Fine filtration, water clarification, raw material recovery depending on the application.

Filtration process is a simple mechanical treatment applied to water for the suspended solid removal.

UP TO 300 BAR. PERFECTLY INTEGRATED! Top quality pump technology in conjunction with the best possible fine filtration of the cooling lubricants for the supply of high pressure on the machine – this is what combistream CS3 is for. Chips can be broken early and deep holes drilled in the one operation – all this in conjunction with up to three differing chip conveying concepts mounted on the one base tank. The rule: The best technology, perfectly integrated!

Nutsche filters for reactors and pilot plants Glass vessel: 10, 30, 50, 100, 140, 300 liter Pressure: -1.0 (FV) to +0.5/ 1.0 bar Temperature: -60 °C to +200 °C Filter cloth: Mesh size 8 to 115 micron Material: Borosilicate glass 3.3, PTFE, PFA, ETFE A clean-room setup and other materials are available to meet your specific process requirements. Buchi nutsche filters can easily be combined with our reactors for solid / liquid separation after the synthesis. The inert materials allow safe processing in an inert atmosphere of a wide range of solvents and acids in a completely sealed (buchiflex) glass system under full vacuum. The slurry is transferred into the filter. The solid content in the slurry is held back by the filter cloth forming a filter cake, while the filtrate runs away to the outlet valve in the bottom plate. The filtering stage ends when the filtrate is of small quantity, which can be shortened by squeezing the filter cake by turning the height adjustable stirrer.

Possibly one of the simplest filtration units used in industry today, the tipping pan filter is ideal for batch processing rapid-settling, fast-filtering crystalline suspensions. The filter is an open-topped vessel which is fitted with a false base, drainage grids and filter medium. The solid/liquid suspension is fed onto the surface of the pan and, at the same time, vacuum is applied to the base of the pan. The vacuum assists in dewatering the suspension thereby producing a filter cake on the filter medium. The filtered liquid (filtrate) is collected from the base of the pan through a special valve assembly. The filter cake can be washed in the pan as many times as is required by the process to achieve the desired product purity. Once the washing stage has completed, the pan is inverted and the filter cake is discharged.

Old heating systems often have problems: The entry of oxygen and dirt as well as limescale into the heating system causes oxidation on the in-ner walls of the heaters and pipes. The result is black heating sludge or “black water”, which settles in the pipes. Malfunctions and a reduced heat output are the negative results. The solution The innovative filtration system FIBALON® professional hotbox enables the heating water filtration in a closed system without installation effort. The polymer fiber filter FIBALON® tool, developed especially for the filtration of heating sludge, works similar to all innovative FIBALON® products and systems. The innovative FIBALON® solution removes heating sludge in a reverse filtration circuit. Metallic and non-metallic particles up to a size of 10 µm are filtered out. New filter material can easily be refilled. The FIBALON® professional hotbox also guarantees a continuously high and efficient heat output in old heating systems.

The use of filtration materials and systems in the field of industrial applications and the use of filter in the producing industries claim filter as well as filter systems on the highest degree. New fiber types with different surface modifications in a new combination, united in the innovative polymer fiber filter FIBALON®tool, offering unique and outstanding filtration results. By optimizing our developed dynamic fiber fixation DyFix® and a particle-dependent fiber geometry, we can now also offer our worldwide unique polymer fiber filter for the industrial use. For example in metal band saws to protect the pump or for the treatment of cooling lubricants and also for cutting fluids (e.g. in CNC machines) is FIBALON®tool with its highly durable special fiber combination an inexpensive alternative with improved filtration efficiency compared to conventional systems such as centrifuges or belt filter systems.

FIBALON®3D offers you excellent filter performance for all common swimming pool filters. Only 350 grams of it replace 25 kilograms of filter sand or 20 kilograms of filter glass. FIBALON®3D filters particles down to 8 microns and due to its fiber fixation, it filters nearly pressure-less. Additional it is made out of recycled PET-bottles. This leads to an energy saving and environment friendly product. The interior of the fibrous ball consists of a slightly denser core and a softer wrap. The balls nestle together to form a consistent filter bed. The deliberately chosen spherical shape maximizes the filter media’s surface area. We also developed the fiber fixation DyFix® which yields an unusually high particle retention rate and deep penetration of particles into the FIBALON® media bed to provide excellent filtration results. FIBALON® leads with minimum weight to an excellent energy balance compared to conventional filter media.

Ultrafiltration and microfiltration differ depending the pore size used. Ultrafiltration can filter out bacteria, viruses and other organisms. Both methods are also applied in the field of water recycling. They sperate undissolved and colloiddissolved solids.

Technical textile for you production needs. Treatment: Hydrophilic/hydrophobic Type of the line: Double beam SS GSM: 8-150 Line width: 3,2m

AERO CELL V HEPA GT filters are the new generation type of high efficiency MiniPleat compact HEPA filters available in a wide range of efficiencies from E10 to E12. AERO CELL V HEPA GT filters are designed to use in HVAC installations where highest degree of air cleanliness is required. The high burst resistance, low pressure drop and high dust holding capacity offered by the filter made it an ideal filter for extreme operating conditions like Gas turbine air intake fine filtration. This filter perfectly suits the third stage filtration levels in Gas Turbines after a normal G4 pre filter and F7, F8 or .

Please contact the team for more information.

Our Compressed air filters are the first line of defence for any air compressor and have a significant impact on the service life of the compressor, lubricant, air/oil separators, and oil filters. We offer the highest efficiency air intake filters in the market, outperforming the competition and delivering more value to customers. With over 3000 Air/Oil Separator designs for compressors, we offer multiple options for the full range of airflow and performance requirements. Our water separators have been designed for the removal of bulk liquid water and particulate from compressed air and gases. Unique centrifugal action removes contaminants at low-pressure drop for maximum energy saving. You can download our product catalogue and brochures on the left panel in order to see our wide variety of products below.

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

Filter unit guaranteeing a double filtration For oil and diesel by absorbing the water and impurities present Filtration capacity of the first cartridge: 30 μ with water absorption Filtration capacity of the second cartridge: 5 μ for impurities Flexible suction hose: 3 metres with a built-in foot valve and a 3-metre discharge hose Structure: a trolley on wheels with a large diameter and retention tray

Ultrafiltration of milk retains the fat globules and the proteins. The inorganic salts and the lactose, along with some of the water, are partially removed as permeate. The resulting retentate is a partially concentrated milk with reduced lactose and mineral content.

Discover our range of filters for agricultural machinery : forage harvester filtration, combine harvester filtration, tractor filtration. We offer a complete range of engine filters, hydraulic filters and cab filters for tractors and harvesting machinery. We work in collaboration with the original equipment brands of the major manufacturers: Fleetguard for New Holland and CASE IH, Donalson for John Deere, Mann Filter for Claas, Fendt and SLH Deutz. Our range comprises almost 35,000 items, including 1,400 items in stock. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming).

Multi-purpose, multi-directional, submerged mixer ideal for general mixing and flow generation; adaptable to many tank configurations. Open, dual helical impeller providing intensive; directional sub-surface mixing pattern with minimal surface disturbance and low power to volume performance 1.5 – 22KW Drive Motors 4 + 6-Pole Speeds, Direct Drive AISI 304/316 or other SS Submersible motor – ip 68 protection High quality, low maintenance motor Robust + compact design – minimal vibration Easy installation + removal Directional mixing + flow generation plus general mixing of lagoons Basins + tanks activated sludge processes vey large surface area reservoirs Denitrification + sbr + asp

Exceptional mixing performance for both low and high solids concentration solutions. Intensive, low-energy, 360 - degree mixing pattern and totally non-clogging impeller. 1.1 – 30KW Drive Motors 10-42 rpm Geared Drive AISI 304/316 or special SS Fixed Bridge + Floor Mounted High efficiency mixing of basins + tanks Activated-sludge processes Denitrification + sbr Also ideal for deep tanks + high mlss Intensive low energy to volume mixing Totally non-clogging design Minimal noise output Robust design – low maintenance

Open, two-bladed helical impeller providing intensive radial, sub-surface mixing pattern with minimal surface disturbance and extremely low power to volume performance Turbulent 3D radial mixing pattern 1.5 – 55kW Motor Range 4 + 6-Pole Speeds, Direct Drive Motor AISI 304/316 or other SS General-purpose mixer adaptable to most tank configurations plus applications and easily positioned for various process requirements Simple, robust, and reliable Non-clogging, no sheering action impeller Virtually zero surface turbulence and no aerosols No o2 transfer and easy to install and remove

The FRMD is used to remove the upper layer of foam, oil or fats. The natural flow within the basin, together with the suction of the pump, attracts the surface of the water towards the center of the FRMD. An adaptable floating weir allows the upper layer to enter the pump and be removed from the basin. The weir and the submersible pump are mounted on a robust floating structure held in place by cables and springs or guiding tubes. Depending on the application and the geometry of the basin, the FRMD can be mounted together with a MIX SL (directional submersible mixer) or MIX-AS (floating downdraft mixer) to help the flow towards the weir. Applicable for removal of oil, fats, bulking + aging sludge, recycling of scum in sludge stabilisation + biogas, SBR and ASP tanks.

Radial Aspiration and Mixing floatable material with downdraft flow and dual action impeller. The homogenization phase allows re-entrainment with the biological process. FRED units prevent settlement and crust formation as well as mixing the entire basin. Nothing is discharged from the basin. Applicable for Viscous + sludge bulking applications and grease trap systems upstream of biological reactor SBR. 1.1 – 22KW Motors 4 – 6 Pole Speed, Direct Drive 2 + 3 Float Options AISI 304/316 or special SS Special dual action impeller Excellent mixing performance Reliable + non-clogging design Easy installation + removal

To assist bio-digestion FB aspirates and breaks high volumes of foam forming on the surface of some biological and thermophilic reactors. Foam is drawn into the volute where the degassing tube allows air to vent to atmosphere and liquid to re-entrain. Nothing is discharged from the basin. Applicable in high foam treating biological reactors, high foaming influent, thermophilic reactors, biological treatment of animal waste.

Discharges the volume of clean water without disturbing the sludge blanket or floatable materials on the surface. Ideal for the SBR Process, Sludge Settling Tanks, Sludge Thickeners plus the general decanting process. Comprises of a Stainless-Steel float Circular Type – 10 to 150 m3/h Capacity Rectangular Type – 150 to 3,000 m3/h Capacity Custom manufactured AISI 304/316 or special Materials Can also be equipped with a pump which allows to transfer the water from the sbr to a basin located at a higher level Minimal sludge blanket disruption Adjustable flow rate Avoids discharge of floatable materials Straightforward design + installation

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s. 1.5 – 30kw Drive Motors 2 + 4-Pole + Dual Speed, Direct Drives Submersible Motor – IP 68 protection AISI 304 / 316 or special SS