Filtering hoses - Import export

nickel plated brass

Easy to guide push along carpet probe with surface filter, hose filter, hose and plug-in coupling for the inspection of pipe runs, to absorb gas traces during the mains survey with the aspiration method. Very lightweight - for daily use without fatigue. The wide border of the flexible carpet probe clings to surface unevenness of the street, largely preventing the entrance of interfering gases (exhaust fumes, ?) during the survey work.

Easy-to-use, mobile carpet probe with surface grille, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

Easy-to-use, mobile carpet probe with surface grille, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

Easy-to-use, mobile carpet probe with surface plate, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

Easy-to-use, mobile carpet probe with surface grille, bag filter, hose and plug-in coupling for surveying pipelines, and for recording gas traces after checking the gas pipeline network with the suction process. Very light, therefore fatigue-free and easy to use in daily tasks. The wide edge of the flexible carpet probe conforms well to unevenness on the pavement surface and largely prevents the ingress of interfering gases (exhaust gases) during the inspection process.

For in-depth measurements in boreholes. Complete with water separator, suction hose, sintered filter and coupling. The measuring tip comes closer to the leak point or the gas mains and kann thus deliver better results.

With its narrow module, the HB 11 is used for particularly fast cycle times. The HB 11 is compatible with Nordson and Robatech. The application head is delivered without a nozzle. Incl. 24 V solenoid valve Incl. Module HB 1 with UNF 3/8'' thread for use with standard nozzles Compact structural width for tight places: only 18 mm PT100 or Ni120 Air-opening / air-closing Head holder for 11 - 15 mm round bars With integrated filter (100 mesh) Hose connection SA 8 Optional: Inline filter, M8 plug for solenoid valve, insulation

Automotive and Industrial – Suction/Vacuum hoses, Radiator hoses, Air & Water hoses. We supply EPDM hoses in a wide range of standard and customized shapes and sizes, with different fabric reinforced options. We also have EPDM corrugated (convoluted) hoses, for air-cleaner applications in Automotive Filters. These hoses have a higher than usual bend radius, for trickier connections, and high ‘vibration’ and ‘vacuum pressure’ resistance. The continuous service temperature of EPDM hoses is -30C to +120 degrees C maximum, with peak temperatures of 150 to 160 degrees C We also supply EPDM-Peroxide cured hoses, where exceptional compression set and heat resistance is needed.

The Resist Sprayer 7,6L is the number one chemical resistant sprayer (stands up to acid and alkaline products). Rugged polyethylene construction. Chemical resistant seals. No fiberglass additives, only pure virgin grade material which resists to acid cleaners. Adjustable poly nozzle. Extra fanjet nozzle. Chemical resistant hose. Anti-clog filter in tank.

Type RK/RF for continuous operation, suitable for virtually all types of dust. Round filter type RK / RF The round filters from this series are suitable for continuous operation and for almost all types of dust. What is special about them is the rotary cleaning device, which causes the dust to be sucked out of the filter hoses and discharged. Using other methods the dust is also continuously dislodged from the filter element, but contaminates the other filter elements in the next moment. Only a small part of the dislodged dust falls down and is discharged. The lower part of the filter is implemented like a cyclone and acts as a pre-filter, where coarse dust is already separated and discharged. Compressed air impulse cleaning is also possible as an option here. The filtering direction of the filter hoses is from the outside inwards. The hoses are provided with support frames.

The term inline filter refers to an expandable, bolted, modular system. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 10,000–300,000 m³/h. RS / RX filter The RS / RX series are a proven, expandable, modular system with low-pressure purge-air cleaning. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 20,000–300,000 m³/h. RS / RX filters are suitable only for vacuum and positive pressure operation. The housing parts are usually made of 2 mm thick galvanised sheet steel. A thicker material in a painted execution as well as in stainless steel is also optionally available. The RS / RX series is 2.85 m wide. Filter hose lengths of 3 m (standard) and 4 m are available for this. The RSEC series has been designed for smaller air quantities and for above-roof installation. This series has a housing width of 2.4 m and 2 m-long filter hoses. The filter hoses are manufactured from polyester needle felt; the filtering direction is from the outside inwards. Filter cartridges and filter tubes are alternatively possible. The filter hoses are cleaned off using the material-preserving low-pressure purge-air system. The purging trolley inside the clean air compartment drives over the hose openings either continuously or controlled by pressure. In the direction of movement the first filter hose row is neutralised, while the second row is flushed from the clean air side. The third row is likewise neutralised. This results in a draught delay, which is necessary in order to allow the dislodged dust to fall into the discharge. The dust is discharged by a tried-and-tested drag conveyor with a downstream cellular wheel sluice. The return air pipes are provided with fire protection flaps and switching devices for exhaust air operation. The filter housing has been tested for resistance to pressure surges. Standard safety devices include likewise tested explosion pressure relief devices, fire extinguishing systems, mechanical and thermal monitoring systems as well as pressure-surge-resistant and flameproof cellular wheel sluices. The transport fan is arranged on the clean air side and is not exposed to swarf and dust. Hence, the conditions of a dust explosion zone do not prevail in the transport fan. RSV/RXV filter This series essentially differs from the RS/RX series in that its fans are arranged on the clean air side. RSV/RXV filters are suitable only for vacuum pressure operation. The capacity range extends from approx. 20,000 - 300,000 m³/h. The filter hoses are likewise cleaned off using the material-preserving low-pressure purge-air system.

Compact filters are characterised by the fact that they essentially unite fan, filter element and discharge or dust collection facility in one. The capacity range of the compact filters extends up to 20,000 m³/h. Different systems and modes of operation are available for the individual assemblies, resulting in a large number of possible variants. This allows us to offer a large range of solutions for dedusting tasks. Based on our many years of experience, we select the filter media from those available on the market that are best suited for the most diverse types of dust and tasks. Filter hoses, filter bags, filter tubes and filter cartridges are used as filter elements. Cleaning takes place using compressed air impulse, low-pressure purge-air or shaking. Fans from own development and production enable us to design a highly efficient and precise layout. Discharge usually takes place directly into collecting containers, such as dustbins with snap fasteners, or into containers, big bags, or via discharge mechanisms into automatic disposal systems. Screw conveyors, drag conveyors, rotary systems, cellular wheel sluices, double-gate sluices and slidegate valves are available as discharge mechanisms. Intelligent control systems, piping elements, silencers and pre-coating devices for auxiliary dusts are standard items in the range. Naturally we also use our know-how to create needs-based custom solutions.

Hydraulic station manufacturing refers to the process of designing, assembling, and producing hydraulic power units or stations. These units are essential components of hydraulic systems used in various industrial applications, including manufacturing, construction, agriculture, and more. Hydraulic stations provide the necessary power and pressure to drive hydraulic machinery, such as cylinders, motors, and valves. The manufacturing process of hydraulic stations involves several key steps: Design and Engineering: The process begins with the design and engineering of the hydraulic station. This includes specifying the required flow rate, pressure, and functionality based on the application's needs. Engineers create detailed schematics and plans for the hydraulic station. Component Selection: Manufacturers carefully select hydraulic components such as pumps, motors, reservoirs, valves, filters, and hoses based on the system's specifications. The chosen components should be durable.

Vacuum Filter SFS Connect. Hose-Ø 50 ... 60 Vacuum filter with plastic housing for vacuum blower with high flow rate

Vacuum Filter VFI Connect. Schlauch-Ø 4 .. 6 inline vacuum filter for direct installation on hose lines

The medium-size (11 kg) Wet and Dry Vacuum Cleaner 50L (ref 50006) is conceived ith blower function, and easy filter clean system. A drain hose allows the direct draining of filthy liquid outflow. On 4 wheels for easy handling. Delivered with accessories (nozzles), textile filter, 2.5m hose, chrome Steel telescopic tube. HEPA Filter to be ordered separately. Flow rate 60l/s, Noise level 72dB.

The 80 L (28.7 kg) Wet and Dry Vacuum Cleaner 80L (ref 50008) is conceived ith blower function, and easy filter clean system. A drain hose allows the direct draining of filthy liquid outflow. On 4 wheels for easy handling. Delivered with accessories (nozzles), textile filter, 5m hose, chrome Steel telescopic tube. HEPA Filter to be ordered separately. Flow rate 180l/s, Noise level 82dB. IPX4 standards

ABS COMPACT SET WABCO EBS SET WABCO 2S/2M EBS SET WABCO 4S/2M ROTARY SLIDE VALVE TRAILER RELEASE VALVE PREV LOAD SENSING VALVE AUTOMATIC RELAY EMERGENCY LEVELLING VALVE NEW LEVELLING VALVE W/SWITCH MANUAL LIFTING PROTECTION VALVE AXLE LIFTING VALVE W/CABLE SOLENOID VALVE W / CABLE LIFTING BOX / PULLER LIFTER RELAY VALVE CHARGING VALVE 5-7 BAR AIR LINE FILTER BRAKE COUPLING YELLOW BRAKE COUPLING RED POLYAMIDE HOSES QUICK RELEASE VALVE

SCHÜTZE Inline-filter for all hoses. For cleaning fluids or air. Filter housing made from stainless steel . Available filter sizes : 50 mesh 100 mesh 200 mesh. Other filters on request.