Film for glass - Import export

Unwanted hair, be gone! Knight Optical offer a range of Stock Dichroic Filters, for use within IPL Applications. Intense Pulsed Light filters are essential to IPL applicators as they are used to filter out the UV wavelength range; and transmit between 400-1200nm for use within cosmetic lasers that are designed to remove unwanted hair, vascular treatment and even acne treatment. These IPL Filters are often stacked between sapphire windows within the IPL applicator to offer a more defined wavelength spectrum when in use. Dichroic filters consist of thin film dielectric coatings on glass, and are designed to offer high transmission over a specific wavelength while reflecting all other wavelengths, having negligible absorption. The dielectric coating is perfect for high power applications, and does not show the strong fluorescence of certain glass filters. We hold a massive inventory of Bandpass, Long pass, Short pass, Band-blocking and Colour-correction filters.

Chemical Composition: AZO Molding process: CIP+Sintering+Bonding Purity: ≥5.4g/cm3 Density: ≥ 99.95% Application: Widely used in Thin film solar cell electrode film, Low-e glass film Maximum Machining Size L 4000MM T 5MM Straight & Dogbone Customize to Customers' Specification

Face Shield Plastic Anti-Fog Eye Protection Face Shield Safety Goggles Face Shield Protective Faceshield anti splash shield PET shield+glasses frame+silicone buckle ,anti Fog/Protective

Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. Face mask with PE film on nose band for glasses wearer.

Glass Fiber Adhesive Tape Monodirectional Fiber Adhesive Tape is composed of polypropylene film laminated with glass fibers and is intended for packaging heavy products. Applications of fiberglass tape include wrapping and binding heavier products, securing pallets, and closing and reinforcing shipping boxes. The adhesive tape has a good tension resistance and a reduced elongation capacity. Glass Fiber Adhesive Tape has an excellent adhesion and has a high tear and tensile strength.

Hotmelt polyester strapping is substitute product of strapping in the past called „Weatherguard“. Since Weatherguard was manufactured with cold glue, Hotmelt strapping is manufactured with hot glue technology. The polyester yarn strands are longitudinally bonded and covered with hot melt glue. Hotmelt strapping is used for light to medium duty applications. It is UV and humidity resistant, but sensitive to high or low air temperature. At low temperatures below 0°C the strap freezes, becomes stiffer and loses the elasticity, but all other features are not affected and once strapped, your merchandise can be stored outdoors at low temperatures without any restrictions. Due to its physical characteristics (hot melt glue), at high temperatures Hotmelt strapping becomes softer and could slip in the buckle under some circumstances (movement of strapped merchandise). Therefore, in this case for outdoors applications in warm regions with air temperatures much above 30°C

Woven strapping is produced in cross webbing technology. It is UV resistant, not sensitive to deep temperatures and can withstand high temperature up to 150°C. Due to these characteristics, it can be used outdoors without limits as well as, for example, in lumber drying chamber and it offers many other versatile solutions for special heavy duty applications in metal, lumber, automotive, steel industry etc. Standard strapping is white, produced in range from 5mm to 38mm and breaking strength from 120kg to 3000kg. All woven products can be printed and fully coloured. We are very proud to be first manufacturer worldwide that found a solution to deliver Woven strapping in bags, which was reserved in the past only to lashing strapping. Our both Germanischer Lloyd certified 32mm Woven strapping in bags – 2000kg and 2300kg – are an excellent and more economical replacement for lashing in many different applications.

In our own laboratory equipped with Instron tensile machine, all products are regularly tested during production process. We use ASTM (American Standard for Testing Materials) test methods, which includes breaking strength test, elongation test and joint breaking strength test (in combination with a buckle). Besides testing of finished products, all raw material is tested. We are also proud to announce that since 2016 two most common WOVEN strapping – 32mm with BS 2000kg and 2300kg are type approved by DNV (Det Norske Veritas). Please contact our sales team for a copy of certificate. The synergy of testing methods and type approvals described above assures customers that they are doing business with a company that manufactures high quality strapping and provides an excellent service which meets or exceeds customer needs

Single side reflective yarn for knitting,single side reflective thread for knitting. Features: 1. Single sided, composed of retro reflective micro-glass beads bonded to PVC film. 2. Available from as thin as 0.5mm wide. 3. Can blends naturally into other fabric or yarns, and add reflecting properties to any items. 4. Can be easily incorporated into any fashion designs and create a new era of fashion-forward reflective patterns. Specification: tem Name:reflective knitting yarn / thread for knitting Model No.:DR01S Base Material:PET film Reflective material:reflective glass beads Daytime Color:grey Reflective color:shining silver Coefficient:R>250 Size:0.5~3mm Application: Can be woven, braided or knit into fabrics or into trim to be applied to fabric. Standard:EN20471, CE Washing cycles:25 cycles @ 60 degree MOQ:800,000 meters Sample:available to check

Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon® is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing Axon' offers a wide range of rods specially used as fillers. They are made with PTFE or celloflon® (porous PTFE).

Axon' expertise in PTFE insulated wires and cables has enabled the company to offer different PTFE based products : tubes, rods, profiles, films, glass cloth impregnated with PTFE, desiccant bags, Celloflon® tapes, etc... They all take advantage of the mechanical, chemical, thermal and electrical characteristics of the PTFE (polytetrafluorethylen). Celloflon is an expanded PTFE material patented by AXON'CABLE Advantages Good temperature resistance (-200°C to +260°C) Low dielectric constant Non adhesive properties Non flammability Chemical resistance, … Biocompatibility Construction Tubes can be used as cable insulation, cannulae, tubes for liquids or hot gases (e.g assemblies for ink jet printing). Various versions : from ultra thin tubes to tubes with specific diameters Various colours : natural, black, yellow, red, orange, bicolour, spiral, … Tubes for micro-catheters with walls as thin as 10 µm PTFE multilumen tubing

Stability is essential for this type of pallet, which is often very heavy and loaded with products likely to slip in transit. Correctly specified and applied Mima stretch film can help to eradicate this problem.

Features Capable of generating wide-angle flat spray even at low liquid pressure. Clog-resistant Spray direction is 75° to the nozzle axis. Applications Cleaning: Conveyor belts, film, eliminator plates, plate glass, planks Foam breaking: Wastewater treatment, paper manufacturers Cooling: Conveyor belts, roofs, tanks Water screen: Fire protection, heat protection, deodorization

3DMicromac‘s highly versatile microFLEX™ product family is the all-in-one solution for manufacturing flexible thin films in photovoltaics, electronics, medical devices, displays, and semiconductors. The production systems can handle various substrates, material thicknesses, and types such as polymer films, stainless steel, and thin glass. The microFLEX™ systems combine high precision laser processing with cleaning and packaging technologies, as well as inline quality control. Due to its modular concept, various customized solutions are available, reaching from industrial mass production to pilot lines as well as applied research. High throughput and efficiency on-the-fly processing; high machine uptime; multiple tension controllers; contactless substrate guiding Highest flexibility easy machine layout modification by modular concept Cost advantages Long term security of investment; reasonable cost of ownership; easy to upgrade and modify; different micro environments.

POLIFILM is offering a variety of solutions for glass protection. Typically transparent or translucent protection films are used for glass protection. For application, which do not require specific UV or weather resistance we have developed natural rubber adhesive systems, which can also be used for coated (low energy) glass. For applications with higher requirements concerning weathering performance we offer protection films with acrylic adhesives, which typically feature a 3 to 6 month weather resistance. In the United States of America POLIFILM developed an innovative product concept, which allows protection of glass under construction conditions for a period exceeding 12 months. This development was jointly conducted with Cardinal Glass.

Ultrasonic sensors are non-contact and wear-free position switches which can also be used under rough environmental conditions. A key advantage of these devices lies in the fact that the material and the surface characteristics of the objects to be detected can be almost anything. Solids, liquids, grainy materials and powdery materials can be identified without the shape or the color of the object having any influence to the measured result. In addition, the ability to detect transparent materials such as films and fluids is of particular importance. The shape and color of the objects do not influence the result of the detection. The capability to detect transparent films or liquids is also of special importance. Ultrasonic sensors are used for distance measurement (e.g. detection of diameters, loop control), for fill level detection (e.g. silo detection), for positioning and presence detection (e.g. glass pane positioning, film tear check, glass bottle detection)

Building-integrated photovoltaics can be used to enhance just about any part of the building‘s exterior: Balcony parapets and railings, external facades and roof elements, conservatories, and carports. Upon request, our products can also be designed to be used as a privacy screen, or with weather- or noiseproofing features. We manufacture modules using both glass-glass composite and glass-film techniques, up to a size of 3,70 x 2,50 m and with a glass thickness of up to 2x 12 mm – with a level of quality that can only be “Made in Germany“.