Filling cracks - Import export

surface protection for concrete, crack filling, hydrophobic impregnation

TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.

DESCRIPTION Coating to quickly fill all sizes of cracks, holes and grooves with no shrinkage and no cracking. COMPOSITION AND APPEARANCE Plaster-based powder filler, calcium carbonate, mineral reducer, cellulose derivatives and various admixtures. The compound obtained is white in colour. SUITABLE SURFACES All types of internal unfinished or painted surfaces : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, terracotta... TECHNICAL CHARACTERISTICS • pH: neutral • Setting time : 30 minutes depending on the ambient conditions and the thickness applied PACKAGING 5 kg and 15 kg bags. APPLICATION To be applied using a coating knife. Amount required : 1 kg m²/mm thickness. DRYING TIME Depends on the ambient conditions, the nature of the surface and the thickness of application. Generally speaking, when spread to a thickness of one cm, the filler dries in 6 hours.

TECHNICAL DEFINITION Multi-purpose filler for interior use. • Filling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates: plaster, plasterboards, plaster blocks, concrete, cement rendering,concrete blocks, aerated concrete, brick, earthenware, TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard NFT 30 608 • pH : neutral • Setting starts after 50 minutes • Setting ends in 1 hr 10 min • Bending : 3 N/mm2 • Compression : 7 N/mm 12 kg buckets on wrapped pallet. STORAGE 9 months in original unopened packing protected from damp. THE TEMPERATURE DURING APPLICATION AND DRYING MUST BE SUPERIOR TO 5°C. DO NOT USE ON A DAMP SUBSTRATE. DO NOT USE ONCE THE PASTE HAS STARTED TO SET.

TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.

Can be successfully used for the production of all concrete block products made of earth-moist concrete, such as paving stones, slabs, embankment stones, palisades, etc. -enhanced color brillance - reduced tendency towards lime efflorescence and ferrous efflorescence/ discoloration - very good anti-adhesive effect - allows for the creation fo an optimal moisture content in concrete face mixes - improved filling properties - reduced shrinkage cracks in face mix concrete - very good surface and side sealing

Bitumer TIXO is one-component, plastic, ready-to-use bituminous mass highly modified with synthetic rubber. Product is a modified bitumen reinforced with additives. High solid content gives possibility of making a good lasting bond which secures and seals the connection of asphalt materials. Solvent content gives a possibility to apply material without heating by cold applied method with spatula or mechanic way. •sealing joints in asphalt roads •sealing of concrete-metal joints •sealing penetrations through building structures •for repairing damage and filling defects in roofing (kinks, cracks, crevices, blisters, leaks), •local waterproofing sealing, flexible seamless waterproofing coatings underground, •for expansion joints between working elements of concrete and steel structures

Bitumer Flexigum PU is a one-component bitumen-polyurethane compound that forms a permanently flexible and chemically resistant fastening and stress transfer compound. Bitumer Flexigum PU finds its use in: •for continuous resilient fixing of the rail as a subfloor, •rail fastening compound and as a lagging for the underfloor, •for making permanent and flexible expansion joints between concrete slabs and elements made of steel, •filling the gaps located between the road strip and the rail, •for filling concrete-to-concrete joints •filling joints, gaps, cracks and expansion joints in heavily worked asphalt and concrete pavements ( e.g., curbs on bridges), •filling joints "working" on steel and concrete bridges and other pavements characterized by strong movements.

FUGA is a gypsum-based jointing compound for manual jointing with a joint tape of plasterboards. It is suitable for complete skim coating or filling small cracks. Application: • For filling and finishing joints between gypsum boards • Suitable for complete skim coating • Filling of small cavities and repairs • Application in premises with normal humidity Advantages: • High level of smoothness and smoothness of joints • Economical and easy to work with • Provides strong and durable bond between boards • Limited shrinking during storage TECHNICAL INFORMATION: In compliance with EN 13963:2015 : Type 3B • Paper bag: 5 kg / 25 kg • Mixing Ratio: ~ 2.8 l water : 5 kg | ~ 13.5 l water : 25 kg • Coverage: ~ 16 m²/ 5 kg | ~ 83 m²/ 25 kg • Consumption: ~ 0.30 kg/m² • Bond strength: 0.3 MPa • Bags per pallet: 120 pcs / 40 pcs • Pallet weight: 600 kg / 1000 kg

Concentrated latex to be mixed with cementitious mortars to optimize workability, adhesion, flexibility and resistance. To be mixed with cement or cement and sand for the creation of jet shooting Boiacas, low and high thickness mortars, fluid mortars for filling cracks, to be mixed with "Intomasso" to make screed 0.5-3 cm thick and to generally confer Greater plasticity and resistance to cementitious mortars and plaster in general, to improve adhesion characteristics, flexibility and water resistance of adhesives. To be used also as cement clinging with high penetrating power and insulating for external and internal, particularly suitable for the consolidation of inconsistent surfaces or flour; To improve the adhesion of background plasters or mineral coatings on smooth or poorly absorbent surfaces, concretes, weak, inconsistent or floured supports. Suitable for the consolidation of cementitious screets of low consistency.

injection fluid for crack filling and waterproofing

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation

surface protection for concrete, crack filling, hydrophobic impregnation