Female thread - Import export

Interchangeable with Cejn 300, Hansen 100 & AutoFlo 23, Orion 44150 & 44515, Proquix 1280, 1281, RectusTema 14 & 22

Interchangeable with Cejn 320, Hansen Auto Flo 24, Proquix 1420 & 1421, Legris 94xx A, Oetiker SC Series C, Prevost ESC 07/ERC 07, RectusTema 25, 26 & 1600

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread igubal® flange bearings were developed for the bearing of shaft extensions or shaft bushings. Like all igubal® products, they consist of an igumid G housing and an iglidur® W300 spherical ball. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Features igubal® flange bearings were developed for the bearing of shaft ends or shaft bushings. Like all igubal® products, it consists of a housing made of igumid G and a spherical ball in iglidur® W300. igubal® flange bearings correspond to the dimensional series E and are offered with 2 or 4 mounting holes. Application area As the igubal® flange bearings are also suitable for dry operation, they are particularly considered for applications in which the installation site is difficult, in humid or wet environment, or with special demands on hygiene. Thus the igubal® flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment. igubal® flange bearing - Applications Installation According to type, igubal® flange bearing are designed for mounting with 2 or 4 holes. The 2-hole types are provided with oblong holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error. Delivery program For shafts, igubal® flange bearings with 2 and 4 mounting holes are available in standard dimensions of 5 to 50 mm. For delivery times and more dimensions, you may please contact us. When to use it? When chemical resistance is required When a low-cost alternative is desired When dirt-resistant bearings are needed When misalignments should be compensated When fully split components are needed When not to use? When temperatures above +200°C prevail When an integrated collar is required When dimensions over 50 mm are needed When rotation speeds in excess of 0.5 m/s should be implemented igubal® flange bearing EFOM With 2 mounting holes igubal® flange bearing EFOM igubal® flange bearing EFSM With 4 mounting holes, dimensional series E igubal® flange bearing EFSM igubal® flange bearing KFSM-GT With 4 mounting holes, dimensional series K igubal® flange bearing KFSM-GT igubal® flange bearing EFOM HT Applicable up to 200°C,resistant to chemicals , with 2 mounting holes igubal® flange bearing EFOM HT igubal® flange bearing EFSM HT Applicable up to 200°C,resistant to chemicals , with 4 mounting holes igubal® flange bearing EFSM HT igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins - male threads for direct connections igubal® flange bearing with ball pins, male thread igubal® flange bearing with ball pins, female thread igubal® flange bearing with ball pins, female threads for direct connections igubal® flange bearing with ball pins, female thread

DryLin® R shafts and supported shafts - Technical data DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM DryLin® R - AWMP Precision aluminum shaft, mm DryLin® R - AWMP DryLin® R - AWMU Supported aluminum shaft, mm DryLin® R - AWMU DryLin® R - SWM/EWM An steel or stainless steel precision shaft, mm DryLin® R - SWM/EWM DryLin® R - SWUM/EWUM Supported steel shaft orstainless steel shaft, mm DryLin® R - SWUM/EWUM DryLin® R - SWUMN/EWUMN Low supported steel shaft orstainless steel shaft, mm DryLin® R - SWUMN/EWUMN DryLin® R - EWUM Partially supported stainless steel shaft, mm DryLin® R - EWUM-Ø DryLin® R - CWM Carbon-fiber shaft, mm DryLin® R - CWM Aluminum Low weight Lower wear of the plain bearing Corrosion resistant Ideal in combination with liners made of iglidur® J/J 200 Delivered off the shelf Steel Low-priced standard High load capacity Application in dry area Hard chrome-plated also available Lower coefficient of friction against plastic bearing Stainless steel High corrosion-resistance High resistance to chemicals Ideal solution for the wet area V4A for extreme chemical intensive applications Female thread, axial male thread Pins Groove cut-in Spanner flat Female thread, radial Special machining All shafts can be individually machined. Please send us your drawing. We'll submit an offer to you in a short time. Shaft request

IKO PILLOBALLs are compact selfaligning spherical bushings which can support a large radial load and a bidirectional axial load at the same time. These bearings are available in insert type, diecast type and lubricationfree type depending on the type of sliding surface. In the insert type, a spherical inner ring makes contact with a special copper alloy bushing with superior runin properties. In the diecast type, a spherical inner ring makes direct contact with the bore surface of the body of special zinc diecast alloy. In the maintenancefree type, a spherical inner ring makes contact with a special selflubricating PTFE liner. Thus, a smooth rotational and oscillatory motion can be achieved with superior antiwear and load properties in each type. PILLOBALL Rod Ends have either a female thread in the body or a male thread on the body, so they can be easily assembled onto machines. They are used in control and link mechanisms in machine tools, textile machines

Adapters with female thread

Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released.

TW crown ring with female thread

Type MK, TW crown ring with female thread, clamping ring and lever

Type VK, Male part - Female threaded with thread seal

Smooth hose connection with female thread for clip shell-inclusion

Black thermoplastic. Steel grade 5.8 or stainless steel 1.4305. Version: Metal parts trivalent blue passivated steel or bright stainless steel. Note: Star grips with projecting steel bush and blind hole or female thread are especially suited for cross pinning. Drawing reference: Form H: bush with blind hole Form K: tapped bush Form L: external thread

These centring clamps enable workpieces to be centred on and lightly clamped in a bore. The clamps have a wide expansion range. The series covers a bore range of Ø12 to Ø30 mm. To increase the centring accuracy the clamps with internal thread have a centring spigot (D2) for a locating hole. The centring accuracy is ±0.2 mm. Centring clamps with female threads fit on M6 grid systems (see illustration).

Unions in numerous variants Numerous special designs Due to our excellent national and international supplier relationships, we are able to deliver standard fittings as well as numerous special designs. It is possible, for example, to deliver A 105 screw connections with a bronze-steel seat. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI B 16.11 BSP thread according to ANSI B 16.11 G thread according to DIN ISO 228 R thread according to DIN 2999 like BSP. Internal / external thread and SW ends All threads are available as internal / external threads (male / female). Furthermore, the screw connections can also be supplied with SW ends (socked weld). The combination of the different ends is also possible. Screw connections according to ANSI B 16.11 are always 3-part and have a metallic-conical seal.

['.VIDE COMPATiBIlITY] - The R1234yf seif-sealing can tap refrigerant dispenser with R134A adapter, connects all R1234yf automotive air conditioning refngerant cans. Refrigerant Dottle opener with 1/2' LH female/internal thread, the 1/4' SAE male/external cooling pipe connection thread can direct fitting for R12 R22 manifold. The 1/4" SAE female x 1/2" male tank adapter fitting for R134A manifold. [R1234YF SELF-SEALING CAN TAP VALVE] - This R1234yf pro ac can tap valve designs with hand operated punch/valve control, it can ONLY been used for self-sealing R-1234YF refngerant cans with 1/2" LH thread, either cannot Be used on puncture style cans. [USEFUL TANK ADAPTER] - The R134A car a r conditioning tank adapter comes with 1/4- SAE female x 1/2” male flare, connects to R134A manifold. [PREMIUM QUALITY] - This R1234YF refrigerant seif-sealing can tap with adapter is made of heavy-duty orass alloy for durable using, with screw-on design and safety check valve

{VIDE COMPATiBIlITY] - The R1234yf seif-sealing can tap refrigerant dispenser with R134A adapter, connects all R1234yf automotive air conditioning refngerant cans. Refrigerant Dottle opener with 1/2' LH female/internal thread, the 1/4' SAE male/external cooling pipe connection thread can direct fitting for R12 R22 manifold. The 1/4" SAE female x 1/2" male tank adapter fitting for R134A manifold. [R1234YF SELF-SEALING CAN TAP VALVE] - This R1234yf pro ac can tap valve designs with hand operated punch/valve control, it can ONLY been used for self-sealing R-1234YF refngerant cans with 1/2" LH thread, either cannot Be used on puncture style cans. [USEFUL TANK ADAPTER] - The R134A car a r conditioning tank adapter comes with 1/4- SAE female x 1/2” male flare, connects to R134A manifold. [PREMIUM QUALITY] - This R1234YF refrigerant seif-sealing can tap with adapter is made of heavy-duty orass alloy for durable using, with screw-on design

Silent blocks are rubber parts placed between components that have only very small amplitude movements, to absorb vibrations and noise from machines equipped with motors. RM2M offers a wide variety of rubber silent blocks with diameter from 10 to 150 mm with the following characteristics: - 2 male threadings. - 2 female threadings. - 1 male and 1 female threading. - Diabolo versions with 2 male or 2 female threadings from Ø 20 to 130 mm. - Conical versions with 2 male or female threading from Ø 40 to 140 mm. - Stainless steel versions with 2 male threadings from Ø 20 to 60 mm. - Stainless steel diabolo versions with 2 female threadings from Ø 60 to 130 mm.

Cylindrical rubber buffer are used to stop and in all cases for amplitude limitation of a flexible element. Standard available buffers: Ø10 to 315 mm with male threading Ø10 to 150 mm with female threading Ø40 to 315 mm on plate

tuyere cap manufactured by CNC turning size outer diameter: 23 mm, 24 mm inner diameter: 19.3 mm hole diameter; 8.2 mm height: 15 mm with female thread M19x1 material: aluminum alloy ASTM 6061 surface finish: anodic oxidation, blue color

hex shoulder nut hex incircle diameter: 1.250 +/- 0.015 inch, the other end diameter 0.968 +/- 0.015 inch height: 0.500+/- 0.015 inch female thread - straight pipe 1/2-14 NPSL material: steel finish: white zinc plated Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Made of A3 Steel Material, Zinc Coated Package Content: 2Pcs x Gas Spring End Fitting Female Thread Dia.: M6 / 0.24"; Hole Dia.: 8mm / 0.31" Gas Spring Strut Joint connector End Fitting. We can supply forging and CNC machining Eyelets / Clevises,small & medium size are forging and cnc machining, large sizes are CNC machining, you can send your requested drawing, we can check if has forging end fittings. It is a good replacement of gas springs Ball Strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies.

Handwheels & Knobs, or Moulded Handles & Metal Knobs as they can be known are a useful component for adjustment purposes, with the ability to operate basic machinery functions once installed. Coming in 3 main threaded styles, these being male, female and threaded through, you can rest assured that we have the best possible style for your particular use. All available on our website along with the ability to request free samples, check out our full selection of products today.

Length of the cylinder retracted / extended / piston stroke: 715 / 3315 / 2600 mm; Weight: 118,69 kg; Working/Test pressure: 16 MPa / 20 MPa; Diameter of the cylinder: 185 mm; Oil feed connector: G3/4" female thread;

At Vital Parts we stock a range of Anti Vibration Products covering both Mounts and Buffers across Male or Female thread types. Manufactured from a high quality Rubber and paired with a resistant Zinc Plated Steel we offer the perfect blend between cost efficiency and strength to give you peace of mind. Each material is RoHS compliant and meets all required specifications for use witihin Automotive or Engineering applications.

Our range of Adjustable Feet includes a number of solutions that are perfect for increasing or adding height to your table or furniture. Also known as Threaded Furniture Feet thanks to their recommendations for use with furniture and chairs, these are ready for installation into almost any threaded application, where a thread is already or can be easily installed. Each of these components comes with a thread that allows for them to be screwed into all female threaded applications such as a threaded wood insert or fixing. Our range features a number of standard and bespoke, unique solutions that suit every possible usage including with machinery and industrial equipment. Each of our Adjustable Feet is available for free sampling, so that you can get a proper feel for the product before you use it for a long term fitting. This ensures the weight capabilities and properties of the foot, especially for heavier duty uses where the weight rating is essential.

P3 tank cap for gasoline, diesel or biodiesel and cleanser, female threaded, in plastic material, passage diameter 32 mm with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the P3 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. On request, we can supply versions with different colours, customized writings and logos. We also provide versions with modified design for easing the handle even when worker uses work gloves. We supply P3 filling plug combined to our P3 threaded filling system, possibly also equipped with safety cable and removable filter.

940 tank cap female threaded, in plastic material, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated, ventilated through valves or reduced ventilation. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 940 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions with different colours, customized writings and logos on request. The trapezoidal threaded filler neck profile, compatible with 940 cap, is obtained directly from the tank molding.

950 tank cap female threaded, in plastic material, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 950 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. 950 fuel tank plug can be supplied in different colours on request. The trapezoidal threaded filler neck profile, compatible with 950 tank cap, is obtained directly from the tank molding. The ergonomic design makes the handle easier also when the worker uses his working gloves;