Female couplings - Import export

Female coupling made of expended polypropylene (EPP) for connecting 43 mm thick ducts. The coupling is used as additional piece, for example when connecting ducts which were cut. Such coupling is put on the outer diameter of a duct. The female couplings are produced in the following diameters 125, 160 or 200 mm. Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @ 110 Pa acc. to PNEN 17192201901

RACORD EN LATION FEMELLE - 45MM Ref. 02045MULF 50MM Ref. 02050MULF 60MM Ref. 02060MULF 70MM Ref. 02070MULF

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding normal Product number supplier 332014211

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding normal Product number supplier 332014211

Waste oil collection tray - 95 l mobile specification Mobile Connection plug, size 4, G 3/4" female (19 774), for Hydraulic coupling, size 4, G 3/4" female (19 770) Drain cock (19 786)

A femalemale coupling made of expanded polypropylene (EPP) is used to connect the EPP15 ducts, when the male part is cut off (e.g. when duct is shortened). The female coupling fits the outer diameter of the 15 mm duct. The couplings are produced in 125, 160 and 200 mm sizes. Thermal conductivity 0.039 W / m*K Airtightness class ATC2 (old D) @ 90 Pa acc. to PNEN 17192201901

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

Sedir Automotive can supply following product ; "Metric & UNF" Hose Adapters Ball-and-socket Joint Elbow Blind Plugs Brake Bleeding Nozzle Brake Hose Adapters Conical Nuts (Brass) Double Ended Hose Connectors Female × Female, Hexagon Coupling 316 Precision Instrumentation Pipe Fittings Fuel Pipe Connectors Flared Hose Adapters Flare Nuts Flanged and Exhaust Nuts Fuel Pipe Connectors and Elbows Gradual Ferrule (Brass) Hose Ferrules (Brass) Hose Ferrules (Metal) Internal Flared Hose Adapters Hydraulic Tube, Weld Union, Connector Hose Tee Connectors (Hosetail) Hose Fitting Caps (Brass) Male x Female Extended Hydraulic Adapter Metal Reduction Pipe Adapters R" - NPT" Hose Adapter Tipper Coupling Female Socket Sheet Iron Sleeves

Our Products List ; "Lee" Nipple Connector "Lee" Nipple Connector "Tee" Nipple Connector "Tee" Nipple Connector Aluminium Cavity-Square Rotor Series Aluminium Cavity-Square Rotor Series Aluminium Rotor Series Aluminium Rotor Series Brass Silencer (with Spring Type) Brass Silencer (with Spring Type) Elastic Noch Coupling (Finished) Elastic Noch Coupling (Finished) Elastic Noch Coupling (Full) Elastic Noch Coupling (Full) Female Threaded Adapter Female Threaded Adapter Flow Control Elbow Connector Flow Control Elbow Connector Fluid Level Gauge Fluid Level Gauge FueI Cap FueI Cap Hexagonal Sinter Silencer Hexagonal Sinter Silencer Hydraulic Cylinder Spherical Bearing Hydraulic Cylinder Spherical Bearing Light Type Blanc Silencer Light Type Blanc Silencer Line Type Flow Control Valve Line Type Flow Control Valve Nipple Connector Crome Plated Brass Nipple Connector Crome Plated Brass One Touch Composite Branch Tee Push In Fitting