Feeders- automatic - Import export

>> Diameter Ø 38 cm 18 section feeder is for chicks and broilers.

>> Diameter Ø 36 cm 12 section feeder is for chicks and broilers.

KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electric Locking Unit The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible. The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications. To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient. The Locking Unit is self-monitoring and provides output signals...

KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Safety Catcher The Mechanical Safety Catcher KRM is operated purely mechanically and requires neither a hydraulic nor a pneumatic system for control. The clamping head is kept open mechanically and acts upon rupture of the suspension (rope, belt, chain, etc.). The energy of the falling mass is then used to generate the clamping force. In applications where lifted loads can be dangerous in case of rupture of the suspension device, Safety Catchers KRM are used to protect people and assure accident prevention. Safety Catchers KRM secure the load at any point of the stroke in a mechanically safe and absolutely reliable way. Due to the principle of self-reinforcing clamping, a very high level of safety is reached. Application example Packing...

Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Auto Bleeder The SITEMA Auto Bleeder has been specially designed for the use with a SITEMA clamping head. It makes sure that the hydraulic system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Valve Actuator MVA Secure the rupture of a chain with the full comfort of a pneumatic SITEMA clamping head When a load has to be secured against rupture of a suspension device (e.g. a chain), many customers use our Mechanical Safety Catcher KRM. This unit has the advantage to hold the load immediately upon rupture of the suspension device. Additional sensors to detect rupture of a chain are not necessary. On the other hand, it is not possible to activate the KRM in a user-defined position without rupture of the suspension device, e.g. for maintenance purposes. Here, the Mechanical Valve Actuator MVA comes to your rescue. It is simply put between the suspension device and the...

Mechanical Valve Actuator MVA Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electropneumatic module EPM The Electropneumatic Module EPM acts as interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

If you need two Coil Reels to hold one coil, you need a Heavy-Duty Coil Feed Line above all. One that is designed extremely robust and knows to subdue even materials of highest bounce and largest cross-sections.To ensure this, we have taken no heed to cost savings but went by the maximum principle: 2 Coil Reels with high-performance arbors retain the coils from left and right. 2 x 2 hydraulic arms secure them from top and bottom – each with eight tons pressure force, each with hydraulically driven snubber roll. The loading is done with one central lifting gear built into a super-duty running frame for the V-nest. Hydraulic manipulators with pivoting and bending function support the threading of the material. On the receiving end, a Pre-Straightener with 200mm work rolls takes over, after hydraulic edge guides have ensured central entry. Now, if someone asks us our definition of “heavy-duty”: We find 36.000 kilogram coil weight and 2.

A perfect combination of space savings and dynamics: the GSW Compact Feed Lines Our Compact Feed Lines are an ideal answer to the challenge of a constraint floor and necessity to process thick materials. Marrying the processes of leveling and indexing into one Feeder-Straightener machine allows for a complete Feed Line with only two individual machines and thus greatly reduces the necessary length. Additionally, the decoupling of the coil mass from the indexing process – achieved through a short loop between Coil Reel and Feeder-Straightener – enables dynamic feeding despite the compact footprint. And, if cross-sections are especially big, the loop can be spared completely, creating yet more space. One more advantage, virtually a by-product out of their very nature, is the quicker set-up of our Compact Feed Lines. This elevates them to not only space- but also time-savers!

With Conventional Feed Lines, the focus lies on speed and material surface. That’s why Conventional Feed Lines are equipped with a Coil Reel for pull-off, a Straightener with variable frequency drive a coil loop and a Servo Roll Feed: the loop uncouples the more inert straightening process from the highly dynamic indexing process and thus allows for high line speeds and preservation of the material surface. Since productivity and capacity demands can vary significantly, we have created different control concepts: while small Feed Lines work with a simple pneumatic drag brake at the Coil Reel and an ultrasonic sensor to control the Straightener speed, the large Feed Lines get fully synchronized controls with motor-limited Coil Reels and a smart loop, creating a steady average speed of the whole line. This allows smooth pull-off of high coil weights while the loop remains very calm – in addition, the Servo Roll Feed can work with full dynamics, even at long indexing progressions.

age 2004 automatic feeder suction feeder Delivery time: immediately from stock Ref: MA240121A Please ask for price. We ship and install worldwide!

age 1990 4 drilling heads adjustable drilling head distance pile feeder from left automatic release by micro switch Delivery time: immediately from stock Ref: HA230098A Please ask for price. We ship and install worldwide!

age 1993 semi automatic hot stamping machine stamping area max. 125 x 280 mm electr. drive 1 foil feeder 1 heating plate automatic feeding unwinding system for round material / cans underframe Delivery time: immediately from stock Ref: GI200261A Please ask for price. We ship and install worldwide!

Pneumatic eyeletting with dual head with automatic feeder, suitable for any process where it is required the simultaneous closing of the two eyelets, complete with support frame and security guards. The eyeletting is applied in the paper industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags.

Eyeleting with mechanical pedal, double head with automatic feeder and support frame, suitable for any process where it is required the simultaneous closing of the two eyelets. The eyeletting is applied in the paper converting industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags.

PNEUMATIC EYELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame and stand. Suitable for high volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags.

Mechanical eyeletting machine with single head, automatic feeder, cast-iron frame and stand. Suitable for medium volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags.

PNEUMATIC EYELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame and stand. Suitable for high volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags.

max. size 27 x 42 cm age 1969 block thickness up to approx. 45 mm 1 hand feeding station milling station automatic cover feeder grooving device cold glue spine glueing gauze station nipping station stacking delivery Delivery time: immediately from stock Ref: MA190287A Please ask for price. We ship and install worldwide!

The automatic bottles feeder designed and manufactured by NPACK is placed at the entrance of your packaging line. This complementary packaging solution allows the continuous and automatic feeding of the vials to be filled, capped and labelled. Our automatic rectifier is suitable for small bottles and is ideal to complete an automatic packaging line dedicated to filling e-liquid (electronic cigarettes liquid), agri-food (natural flavours, food colours, etc.) and cosmetics (essential oils, etc.) products. Features The function of the machine is to manually add materials to the storage bottle library for storage. The materials in the storage bottle library will be automatically quantified and set at a set speed to the turntable. The turntable supplies the bottles as required by high-speed rotation. Standardize the bottles, and divide the bottles at a certain speed to send the bottles supplied by the turntable into the unpacking part. The noise is less than <70dB.

The AutoSAM 3.26 is an automatic bar feeder with hydrodynamic bar guidance. It is particularly suitable for connection to sliding headstock lathes (Swiss-Type). Its field of application is in small, medium and large series. Its big brother is the bar loading magazine AutoSAM 3.51. The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. Four clamping jaws ensure maximum hold while the collet is being pulled onto the bar. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more.

The AutoSAM 3.51 is an automatic bar feeder with hydrodynamic bar guidance. Its field of application is in small, medium and large series. Just like its little brother, the Bar loading magazine AutoSAM 3.26, it is well suited for connection to sliding headstock lathes (Swiss type). The bar feeder has a calibration-free material clamping which is carried out by collets. This saves time for material change due to the automatic centric positioning. The Mitsubishi PLC control system with PC board ensures extreme process reliability and simplifies communication with the lathe. Compatible with almost all types of lathes. For example Citizen, Star, Nomura, Mazak, Okuma, DMG Mori, SMEC, Doosan, Nakamura, CMZ, Takamaz and many more. The loading magazine has a control panel with function display, which is used for the settings of the machine. Multilingual menu navigation and error messages are included as standard in the display.

Brand Name jiayi Condition New Weight (KG) 4Video outgoing-inspection Provided Machinery Test Report Provided Marketing Type New Product 2020 Warranty of core components 1 Year Core Components Bearing, Motor Warranty 1 Year Applicable Industries Manufacturing Plant Showroom Location None Dimensions 232mmX162mmX169mm

Specifications Manufacturer 2008.0 Condition Used Description mobile automatic friction feeder Bograma FR 550 Servo C from year 2008 for creating brochures and single sheets for offline operation with: Bograma- Individual modules, Bograma cutting systems, third-party units, etc.

Coleslaw filling machine Discharge dosing system for non-pumpable products Add-on filler for liquids 2-lane machine Machine performance: 40 cycles/min. max. 60 tubs/min. 4.800 tubs/h Special features: Tub magazine with automatic magazine feeder 2 dosing chambers with individual adjustment from 0 – 500 ml Coleslaw depressor Liquid filler for brine, etc. Pressure cap station with automatic magazine feeder Film bar with integrated sealer

Pail filling machine for 3 – 12 kg 2-lane machine Machine performance: 14 cycles/min. 28 pails/min. 1.680 pails/h Special features: 6 rotary piston filling pumps (4 x coarse dosing, 2 x precise dosing) Precise dosing by means of load cells Film bar with integrated sealing and super-heated steam Pressure cap station with automatic feeder

Thanks to its innovating system, SBL takes, counts and moves the bars for shearline feeding in a completely automatic way. With SBL you save money and enhance productivity due to its flexibility. Advantages 1. ‘SBL’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line. 2. No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving. 3. The elimination of manual bar feeding enhances security at job site. 4. “SBL” special structure makes it possible to feed shearlines with higher a number of bars of different diameter and length resulting in a. drastic reduction in machine setup; b. plant overall dimensions determined by clients’ room available; c. higher flexibility of the plant.

We design our coil feeder machine for working precision feeding and without damage on sheet metal surface. Our coil feeder machines provide to have working possibility with high speed and precision sheet metal feeding results during press feeding. We have as alternative for coil feeder machine standard models. And we design and provide for different request specific coil feeder machines. We supply our coil feeder machines as to our customer's requests and needs, according the working sheet raw material, thickness and width. We check our customer’s final target product and requested production capacity, then we offer the optimum solution coil feeder machine solution.

ADS7 series 7-roller straightener servo feeder models work between 300 and 1600 mm of width and 0,5 and 4 mm of thickness. All of our 7-roller straightener servo machines utilize the piloting system and pinch rollers work synchronized with the straightener rollers. Bosporas produces 7-roller Model with static body and in accordance with CE Regulations. Our straightener servo feeders enable high performance automatic feeding to the presses. Servo feeder and straightener are merged and used in the same group. The practice of our models’ feeding system is easy to set up and to control. The angle between the feeder and the coil is 90° parallel. It has the feature of 50 mm of movement capability to the left or right from the feeder’s center. Feeds the sheet metal in an automated cycle, pre-programmed speed and high delicacy.