Fault - Import export

If mobile phone reception is poor and there is a landline connection available, the automatic telephone dialler is a reliable alternative to fault message transmission by text message. Any fault messages are forwarded to different pre-programmed phone numbers. Product features For forwarding fault messages via the landline. Integrated microphone and control loudspeaker Voice messages to any number of recipients Digital message to one or more alarm receiving systems Remote query, remote control depending on device type Messages to pager or as text message depending on device type

A GSM modem is a favourable option for transmitting plain text fault messages as text messages to operating staff‘s mobile phones for immediate notification of fault messages. The output of the message text can be freely configured. Text messages can be transmitted to several mobile numbers. A sufficiently good mobile phone network is required for the use of the GSM modem; alternatively an automatic telephone dialler can be used where a landline connection is available. Transmission of fault messages by text message and the mobile phone network. Product features Automatic alarm issued as text message when changes in state occur Freely definable message texts Cyclic alarm forwarding to up to 5 different numbers Analogue and/or digital inputs Straightforward configuration with PC and software Text message state query for all inputs and outputs Remote access with PC/laptop and status display on the screen

Employee postural assessment report for companies The Sam3D report reveals an employee's unease within the company. It can therefore be adapted to improve the employee's quality of life.

Automatic AC Voltage Stabilizer Maintenance-free Thyristor Technology 1kVA – 3.200kVA Power range Production at Single Phase, Two Phase, Three Phase Production at all industrial voltages Low Voltage Correction up to 60% High Voltage Correction up to 45% Response time: 20msec Correction Time: 100msec – 200msec 100% Unbalanced Voltage and Load Capacity Continuous protection against voltage fluctations Independent voltage management on each phase Efficiency >97% Standart Operator Panel with 4x20 LCD display Electronic Overload, Over Temperature Protection Low Voltage / High Voltage Protection Suitable design for industrial environment TS EN ISO 9001: 2015 Quality Certified

For conductor cross-sections from 1.5 – 16 mm² (AWG 16 – 6). Material: tin-plated copper.

New- / First- /Common Signal Annunciator RP 5994, RP 5995 • Fast localisation of failures and their causes • Reduction of standstill times in production • Adjustable operating modes: New- / First signal annunciator according to DIN 19 235, common alarm annunciator manual reset / auto reset settable • Expandable from 8 to 88 fault signals • Open or closed circuit operation settable • Adjustable on delay for input signals 0 to 10 sec • Reset buttons for audible alarm and common alarm on front side • Connection for external reset of audible alarm, common alarm and single alarm according to setting • Galvanic separation to bus RS485 (optional) • Accessories: buzzer RK 8832, display unit EH 5994, EH 5995 text display unit EH 5996, GMS-module RP 5810 • Width: 70 mm Base module RP 5994: - 8 fault signal inputs with indicator LED on the unit - One relay output each for audible alarm and common alarm - Reset buttons for audible alarm, common alarm, and single alarm - Connection of remote...

• According to IEC/EN 60 255, DIN VDE 0435-303 • Common alarm annunciator for 12 signals • 1 relay for common signal and horn • Inputs up to AC/DC 230 V • 1 connection for acknowledgement button of horn and lamp test • Width: 45 mm

• Permanent sound, pitch fixed • optionally with switchable interval- / permanent sound • Devices available in 2 enclosure versions: - I- and-version, e.g. IK _ _ _ _ with depth 61 mm, with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43 880 - S-version, e.g. SK _ _ _ _ with depth 100 mm, with terminals at the top for cabinets with mounting plate and cable duct • Width: 17,5 mm

• According to directive 1999/5/EC (RTTE) for radio equipment and telecommunications terminal equipment • 4 digital inputs and 4 relay outputs • Variant RP 5812/001 with 2 digital and 2 analogue inputs and 1 analogue - and 2 relay outputs • Auxiliary voltage DC 24 V • DC 24 V digital inputs • Automatic SMS messages for status changes • Quad-Band GSM-Module for 850, 900, 1800 and 1900 MHz (GSM = Global System for Mobile) • Pin protection of SIM card • Caller password protection against unauthorised access • User Dialogue language for: German, English or French • Configurable authorization levels for up to 16 users • Assignment of different I/O’s to different users • Automatic sending of SMS when digital inputs change state I.e. come on or go off or both (on rising edge or falling edge) • Automatic sending of SMS when analogue inputs - exceed preset lower and upper limits or - when signal is within the preset window - and when the signal returns to good state • Adjustable -...

• New fault annunciation with single frequency flashlight according to DIN 19 235 • Expandable from 16 up to 160 inputs • in 2 groups of 8 inputs selectable: - open circuit operation - closed circuit operation • Input voltage up to max. AC/DC 240 V • Delayed inputs • Exchangable front for individual scale • Removable terminals • Flush mounting • Frame 72 x 144 mm

Display unit EH 5994, EH 5995 • Exchangable front label for individual legending • As option galvanic separated RS458 bus • Protection degree for front side IP 64 • Enclosure for flush mounting 96 x 96 mm • Display unit EH 5994: - 8 fault signal LEDs on the unit - Reset buttons for audible alarm, common alarm and alarm signal • Display unit EH 5995: - 8 fault signal LEDs on the unit - Without reset buttons

• According to DIN 19235 • Common alarm annunciator • Expandable from 4 up to 160 inputs • Open circuit inputs / closed circuit inputs selectable via bridges X1-X2 • Delayed inputs up to 10 s • Acknowledgement push button QH for external buzzer built in • Accessories: Buzzer IK 8832, SK 8832 • Devices available in 2 enclosure versions: I-model: depth 61 mm, with terminals at the bottom for installations systems and industrial distribution systems according to DIN 43 880 S-model: depth 100 mm, with terminals at the top for cabinets with mounting plate and cable duct • Width 35 mm Fault annunciator IL 5990, SL 5990: • 4 inputs with LED on control unit • 1 output for common signal and 1 output for audible alarm

• Common alarm annunciator for 6 signals • Optionally for up to 8 signals • Closed circuit operation • Optionally with open circuit operation • With LED for each fault signal • Inputs up to AC/DC 300 V • With relay output for common signal • Pushbutton for fault signal acknowledgement and function test • Front surface 96 x 96 mm

Safely Inspect Electrical Systems with Ultrasound Electrical failures pose a tremendous safety threat and have the ability to shut down operations entirely Industrial plants require a lot of power to operate, and much like the machinery required for production, their electrical systems can also fail. The Importance of Maintaining your Electrical Systems The implications of a total electrical system failure are far more severe than that of an ordinary mechanical failure. They have the potential to damage equipment, cut power flow and cause downtime for days, seriously injure or kill workers in the immediate vicinity and even impact the surrounding areas power grid. Faults in electrical systems can be detected at their earliest stages with regular ultrasound inspection and therefor prevented far before anything catastrophic happens.

Radial line recloser When a recloser is installed on a radial feeder it automatically clears transient faults and isolates permanent faults. More than one recloser can be installed on a feeder to isolate faults selectively and ensure fewer customers are affected. Loop recloser A loop recloser further improves the reliability of a power supply by automatically reconfiguring a network in the event of a failure.

Tavrida Electric has revolutionised circuit breaker design by developing a new generation of circuit breakers and controls with exceptionally fast opening, closing and response times. Opening and closing times are as low as 12 and 24 ms, respectively. This enables Fast transfer switches with transfer times as fast as 2 cycles. Such quick operational times allows very sensitive loads to operate without interruption in case of a main power source loss. The fast transfer switch solution eliminates costly downtime, reduces production equipment stress, ensures quick return on investment. Arc flash mitigation with interruption in one period. That quick interruption time increases operational safety, reduces switchgear restoration time and loss of productivity, limits switchgear damage and repair costs. Fault current limiting solutions without operational losses capable to automatically reconnect power sources.

Tavrida Electric recloser can be used to quickly build costeffective unmanned structure mounted outdoor substation. Provides full protection and automation functionality required at the substation.

Your reference product A9A26927 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging service or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

starlim//sterner's work is process-related, thus eliminating sources of error wherever possible. The zero fault philosophy is a clear commitment to our customers and guides all starlim//sterner workers who process their daily tasks. Fault-avoiding approaches such as FMEA, advanced quality planning (APQP), consistent monitoring of production processes and stable processes with high CPK ratings currently result in a failure rate of < 1 ppm. We envisage a further improvement of the ppm rate by continuously introducing improvements. Certified management systems make sure that the zero-fault philosophy is realized throughout the group's entire organization. We will not rest on our laurels, but work continuously on the improvement of our products, our services and our performance. If you want to send us commentaries, complaints or simply a few encouraging words, send them to this e-mail address: customer-service[at]starlim-sterner[dot]com.

The new line of KW TRIO detectors capture with the highest accuracy, reliability and velocity, even the smallest lumps and neck downs in wires, conductors, optical fibres, cables, tubes and hoses. 3-axis detectors provide more precise detection of short- term faults, because very often, in wire and cable products, the fault covers only a limited angle on the product circumference, e.g. small bumps or blisters. Properties Cutting-edge 3-axis measuring optics Maximum accuracy and stability Can be flexibly mounted in any orientation Non-contact measurement of lumps and neckdowns Extremely high sampling rate Suitable for line speeds up to 3000 m/min. Integrated interfaces such as Ethernet IP, Profinet IO, Profibus DP and others Integrated web server in all processor versions. Benefits Fault detection even at very high line speeds Immune to ambient and scattered light Dust-resistant thanks to built-in air curtain IIntelligent fault processing at the highest level