Fan heaters - industrial - Import export

Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes through the interior of the heating coil of the air heater and the heat transfer is carried out by the air fan of the air heater. The fan can be axial or centrifugal, the axial type is used for direct dissolution and the centrifugal fan allows a network of ducts to be applied in addition to having a greater reach.

Heaters for heat fans and heat curtains

OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

Because the oil heating units come with an integrated fuel tank you won’t need any cumbersome or bulky external fuel tanks, giving you even more freedom and mobility when it comes to choosing the right place for installation. The light yet sturdy undercarriage with extra-large wheels allows you to transport and install the units quickly and easily and because the units are so mobile they can be quickly and easily moved around building sites and over rough and bumpy terrain, even single-handedly if need be. The units’ solid and strikingly simple construction guarentees a reassuringly high level of reliability and a blissfully low level of maintenance. Needles to say safety is always first and foremost with the oil heating units in the IDS Series: The units are standard-equipped with an electronic flame safeguard, safety thermostat for overheat protection and fully automatic aftercooling.

OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

The IDS 100, our second-strongest model of this series of mobile indirect oil heaters, provides powerful mobile heating power Manufactured in Europe, the oil heater fan IDS 100 with a nominal heat input of up to 117.26 kW and an air flow rate of 5,500 m³/h quickly and effectively heats storage and production halls, workshops, building sites and greenhouses. This is ensured by the integrated oil burner with Suntek pump. Of course, your safety is our top priority. Owing to the double-walled housing with protective coating the surface temperature of the outer casing is reduced to a minimum, which means a decreased risk of injuries for the user. Moreover, the housing provides optimum soundproofing. The device is equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

IDS 80 OIL HEATER FANThe robust IDS 80 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels This oil heater fan of the IDS pro series is especially suitable for longer heating applications, because it is possible to connect an external oil tank in addition to the integrated fuel container. The double-walled housing with protective coating ideally absorbs sound, minimizes surface temperature and thus the risk of injuries. Electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling are further safety measures. The carriage and big wheels provide sufficient flexibility. Especially when working on building sites, the location can simply be changed. The oil heater fan IDS 80 further comes with a connection facility for an air transport hose and a two-way hose distributor.

IDS 45 OIL HEATER FANThe robust IDS 45 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels The professional heater fan IDS 45 is suited for an uncomplicated and quick heating of storage spaces, workshops, building sites, green houses or stables. Thanks to the integrated oil burner with Danfoss® pump it operates economically and effectively in every heating application. Owing to its robust design and convenient carriage, the device can quickly be transported from A to B by one person only and thus enables a quick change of location. Safety is the top priority of the oil heater manufactured in Europe. The housing is double-walled and with its protective coating provides an optimum soundproofing while simultaneously minimizing the surface temperature of the outer casing and thus the risk of injuries for the user.

ELECTRIC HEATER FAN TDS 20Black, white, hot! Ideal for many stationary heating tasks. This electric heater fan cuts a remarkably fine figure in the most varied of heating applications. And not by chance, but exclusively made by Trotec. In developing the TDS series, we paid particular attention to many practical details which make the great difference in contrast to conventional standard electric heater fans. In addition to common equipment features such as overheating protection or a fan motor provided with thermal protection, the electric heater fan TDS 20 comes with an extra air baffle which optimally leads the warm air flow outside and initiates maximum efficiency. Thanks to the integrated thermostat control, the produced warm air flow can be continuously adjusted exactly to the desired temperature.

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

INDIRECT (VIA STORAGE MEDIUM) OIL HEATER FAN IDS 900The IDS 900, our most powerful model of this series of mobile indirect oil heaters, provides the strongest mobile heating power The greatest model of the IDS series was especially designed for heating individual halls or several rooms and comes equipped with a flow-optimized stainless steel combustion chamber for a particularly high efficiency and with an exceptionally powerful axial fan. The compact construction comprises a robust, epoxy coated steel frame with double-walled housing for optimum soundproofing and insulation. Function related, the delivery of the oil heater fan IDS 900 does not include an integrated fuel container, which is why the use of an external tank is recommended for automated continuous heating. Optionally available is also an oil tank pedestal with a capacity of 208 litres.

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. All oil fired indirect IDE devices take place with help of a Danfoss® injection pump. As well, these models have an easy reachable fuel filter on the outside. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

OIL HEATER FAN IDE 60 DThe integrated fuel tank makes the high-performance direct oil heater fan IDE 60 D our best recommendation for use on construction sites, in halls and so forth! Whether for direct permanent heating in agriculture and production, on construction sites or in storage facilities – there are many typical standard oil heating tasks where sound technology with ideal value-for-money ratio and a high 60 kW heat output is called for. Our response: The oil heater fan IDE 60 D. This ready-for-use heating device is a particularly efficient directly fired oil heater fan and due to its durable housing made of doubly coated material is optimally prepared for various heating applications in well-ventilated areas. In the course of this, the IDE 60 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement

IDS 20 D Oil Fired Direct Heater The IDS 20 D shows mobile heating power with 100 % effectiveness - exactly where you need it. It is completely made in Europe and it is the perfect fit for heating stables with high air flow or construction sites in the winter. Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 20 D: Heating capacity: 20 kW Air flow: 350 m³/h Input voltage: 230 V / 50 Hz Current consumption: 1 A Fuel consumption max.: 2.04 l/h Tank capacity: 17 litres Length x width x height: 720 x 300 x 450 mm Weight: 20 kg

The indirect oil heater fan IDS 30 F was specifically developed for the mobile application as tent heater. This easily portable device has a robust frame with shock protection and handles as well as a hose connector already preassembled. We deliberately decided against integrating a tank in the IDS 30 F so that users can benefit from not only the lesser weight but also from time-saving loading since it is not necessary to drain the tank completely of residues. The absent tank also means that no additional transport or insurance documents are required for transport and storage. The fuel supply of the oil heater fan IDS 30 F can be effected either via a large external tank or jerrycan – appropriate accessories are available for both types of application. The heating device is prepared for fully automatic thermostat-controlled operation ex works. For use inside a tent, an external thermostat can be connected optionally using a cable of ten metres length.

The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber

The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value

Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 20 R is suitable for uses in enclosed rooms Easy transportable and easy to use Possible fields of application: Automobile workshop Construction areas Assempby operation Gastronomy Storerooms and workshops Greenhouses and many more...

Whether you want to reliably keep construction zones warm, effectively heat larger halls, protect your livestock from the cold or keep your work material free of ice despite low temperatures: with 100 kW of direct heating power the IDE 100 D provides a high heating capacity for every demand with 100 % efficiency. The integrated oil burner of this heating device can be fuelled by either diesel or fuel oil. The continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss® injection pump. Safe operation of the oil heater fan is ensured by an electronic flame trap and an integrated overheating protection. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

If you are looking for a very efficient heating solution tailored to your needs that comes with competitive prices and short delivery times, please contact Embro and get the best service and high-quality products Made in Germany and Made in Europe!

In tough applications such as e.g. high temperatures or movement of corrosive gases, it is not always possible to mount a motor in the volume flow. The solution for this is the so-called bifurcated fan which is an axial fan where the air flow is divided in a tunnel, which means that the motor is not in the volume stream. It is thereby protected from possible harmful particles or high temperatures. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit.

A mixed-flow fan combines the advantages of axial fans with the characteristics of radial fans. Simply described, it is an axial fan with a fan wheel in radial format. This provides a cost-effective design, in duct or box design, with a stable fan curve and relatively high pressure. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit. Mixed-flow fans are usually used as ventilation fans. Typical applications are ventilation solutions in gyms, sports halls, warehouses, commercial kitchens, factories or airport terminals. Depending on requirements, the design of a mixed-flow fan can be completely adapted to the customer’s needs. With the right dimensioning and material selection, a mixed-flow fan will work problem-free for many years.

The wall fans we offer are direct-driven axial fans that are easily installed in walls or ceilings. The wall fans can be in 1-phase or 3-phase design. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials The fans are usually supplied as a complete unit, but we can also offer new impellers for existing wall fans.

Radial fans or centrifugal fans are a type of fan that uses centrifugal force to create a pressure increase and a volume flow. This type consists of a fan wheel that rotates in a snail-shaped cover. The flow enters the fan through an inlet placed axially with the fan wheel shaft and motor, and is then thrown out radially with the help of the force from the fan wheel. Unlike axial fans, the motor is not in the volume flow of radial fans. To change the performance and characteristics of centrifugal fans, different designs are used on the fan wheel. The strength of the centrifugal fan is its versatility. A radial fan can be designed to transport a variety of volume flows at a wide range of pressures. At higher flows and relatively low pressures, an axial fan may be a better option. Centrifugal fans are available in single and double suction versions.

Axial fans are a type of fan that creates airflow through a fan wheel that rotates around an axis and moves the air parallel to the axis. Axial fans can also be called propeller fans and are usually delivered as a complete unit consisting of fan wheel, motor and cover. Typically axial fans are direct driven with the impeller mounted on the motor shaft. There are also other designs such as e.g. belt-driven or with shaft bearing and coupling. The axial fan’s strength is to transport large volume flows at low pressures. At higher pressures, a centrifugal fan may be a better choice. To reach higher pressures with axial fans, these can be connected in series. Usually, the efficiency of an axial fan is comparatively lower than that of a centrifugal fan. But by using guide rails, diffusers and other accessories, an axial fan can reach the same or higher efficiency. The flow of axial fans can be regulated with vane or damper or speed regulation.

ATEX fans are fans that are installed in environments where there is a risk that an explosive atmosphere can form. Therefore, these fans need to be designed according to the ATEX directives. Depending on the classification of the environment, internal solutions inside the fan, such as e.g. spark protection in the fan cover or non-sparking materials. While in other cases, EX-rated motors are also required. Explosive gases require special fans. Our factories are certified according to ATEX for the manufacture of fans for Zone 1 and 2 as well as for Zone 21 and 22 containing dust. The design, production and use of fans for explosive media or environment is clearly specified in Europe by standardized directives. To choose the right ATEX fan, one should start from operating data and process design, as well as whether there are any special requirements.