External designs - Import export

The LogTag ST100T-15 external sensor is a strong and safe external sensor specifically designed for use with food. This external sensor is suitable for measuring the core temperature of a product. Place the sensor in the food and measure the temperature accurately.

Extruded aluminium louvres designed for external and internal building finishing and looking for light and visibility control but always at the same time allowing for ventilation from one side to the other in the installation. Ideal for courtyards, wall finishing, habitually used spaces etc.

A specialized design combines an external cylinder with a cylindrical raceway and balls that are incorporated in the retainer, making rotary and linear motion in the axial direction possible simultaneously with rotational motion. Small Rolling Frictional Resistance Incorporating a ball with high accuracy into the precisely polished external cylinder results in small rolling frictional resistance and extremely smooth rolling motion together with reciprocal motion. Low Inertia Since the retainer has high rigidity and is lightweight, it has low motion inertia, making it suitable for rolling motion and reciprocal motion in highspeed operations. A Variety of Models Standard and heavy load models are available, each with different load ratings, and each offered with or without seals. It is easy to choose the right product based on the specifications of your machine or device.

A specialized design combines an external cylinder with a cylindrical raceway and balls that are incorporated in the retainer, making rotary and linear motion in the axial direction possible simultaneously with rotational motion. Super Precision After the raceway surface of the external cylinder and shaft are heat treated, they receive an ultraprecision finish and are set to zero or a slight preload state by incorporating high precision steel balls. This provides extremely high accuracy in both rotary and linear motion. Super Small Size Tiny balls incorporated in a thin external cylinder result in a very small diameter and small sectional height. Since each component is precisely ground and adjusted to ideal preload conditions, extremely smooth and stable operation with low frictional resistance over a long period of time is possible.

The HZ series lifting platforms are lifting equipment to be installed in a fixed position and are operated by an electrohydraulic control unit. Manufactured according to the anti-accident guidelines, they consist of two lower and upper planks and a pantograph system operated by a hydraulic cylinder. TECHNICAL FEATURES: Sturdy structure Construction according to CE safety standard Top plate in smooth sheet Aluminum safety perimeter on the top deck European production hydraulic control unit, positioned externally, designed for intermittent use of 30% Pushbutton with low voltage controls Hydraulic system with overload safety valve Control valve for descent speed Over-dimensioned hydraulic cylinder with anticadut valve in case of pipe breakage Safety distance between the arms of the pantograph Self-lubricating sleeves Removable lifting hooks for transport and installation Yellow color RAL 1028 painting

IBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter including seal, for standard thread S 60x6 external or 1" external, designed to fit all commonly used European IBC containers. With the appropriate thread, the discharge valve can also be screwed directly onto the original discharge valve that is already on the IBC tank if the original valve is leaking or faulty. In this way the IBC discharge valve ensures fast and reliable residual emptying of the container with good dosing. The discharge valve is an indispensable accessory to ensure a professional connection of the hose or for filling from your IBC container.

Other versions Profile MA07/1: Incremental, length, angle, rotational speed or number of pieces measurement LED display (1 line of 5 digits) Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces Free programming via front keyboard Incremental measurement function (operating mode I), actual value memory (operating modes I and S) With reference connection Programming enabled via external input (keyswitch) Compact design

This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications. Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings. With no rotating parts, this sensor needs no maintenance when used correctly. Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches. The strain-gauge based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque.

Freely programmable, compact measurement display. Optionally, the positions of incremental measurement systems or rotary speeds as well as number of pieces can be displayed combined with commercially available initiators or light barriers. Incremental, length, angle, rotational speed or number of pieces measurement. LED display (1 line of 5 digits). Inputs for incremental sensors, length and angle measurement, rotational speed or number of pieces. Free programming via front keyboard. Incremental measurement function (operating mode I), actual value memory (operating modes I and S). With reference connection. Programming enabled via external input (keyswitch). Compact design.

Magnetic absolute multi-turn rotary encoder in heavy-duty stainless-steel design – batteryless, robust and flexible. The WV42HD is predestined for demanding measuring jobs in the heavy-duty area owing to its extremely robust housing,  its bearings, which are designed to tolerate high radial and axial loads as well as its high resistance against external impact. Heavy-duty design in stainless steel. Compact design (42 mm diameter). IP69K, IP68 protection category. Resistant to salt spray and acids. CANopen interface, SSI, analog. Multi-turn without battery. High shaft loadability of up to 270 N. 16 bit mult-iturn (65536 revolutions). 12 bit single-turn (4096 steps).

Flameproof air warmers ATEX II 2 G/D IECEx & ATEX Ex II 2 G/D Ex d IIC T2 – T4 The „FWDT“ range of air warmers with an easy to adjust external thermostat is designed for heating small work or storage areas and similar applications, located in zone 1 and 2 or Zone 21 and 22 Hazardous areas, where the flammable atmosphere is a group IIA, IIB or IIC Gas Group.

The course external thread of SPIROL's Self-Tapping Insert forms an internal thread within a molded or pre-drilled hole during the installation process into a plastic assembly. SPIROL Series 10 Self-Tapping Inserts are thread forming Inserts best suited for softer thermoplastics or thermosets. Self-Tapping Inserts provide the best pull-out resistance for a post-mold installed Insert, yet generally cost more than their post-mold counterparts. The external threads are designed with a thin profile to minimize induced stress in the plastic and have a relative coarse pitch to provide the maximum plastic shear surface to resist pull-out.

The way in which it was thought allows the use of an energy-efficient glass, and the precision of the design gives it excellent thermal and acoustic characteristics. Heel depth 80 mm Sash depth 88 mm Profile thickness 1.5 mm Polyamide bar length 45 mm Maximum sash width (L) 1500 Maximum sash height (H) 2600 Maximum depth of glazing 65 mm The maximum weight of the sash 160 Kg Opening possibilities Internal opening: Beating, oscillating-beating, oscillating-parallel si oscillating; External opening The swing, the designer

High & Low Voltage Quick Connector] Our AC valve core removal tool kit provides two quick connectors the high-pressure connector (redl with a 16mm bottom ID and the low-pressure connector (blue) with a 13mm bottom ID. The ball valve on the side can be opened and c losed by a quarter turn. This prevents refrigerant leakage in the air conditioning system when replacing the valve core. [High Quality Material] This valve core removal tool is mainly made of high-quality brass, which is strong and impact-resistant. The valve stem is made of stainless steel the red and olue knobs are made of aluminum. The external antiskid texture design is easy to hold and use and prevents the problem of excessive force on various valves.[Easy To Use] The valve core remover is very easy to use, the valve core grab tool can be easily inserted inside and control the valve core, and the valve stem has strong suction, which can hold the valve firmly and help you replace the valve core easily.

This model is crafted from a faux leather, so it will be worn for a long time and retain the original appearance. Space inside is enough to take with you everything necessary to walk. It’s suitable to any outfit: minimalist design; secret external pocket on the back wall; two internal pockets; adjustable straps.

The product is ready to use. Spray on the outer surface of the engine (when the engine is cold). Allow the product to penetrate the dirt for about 5/10 minutes, preventing the liquid from drying out, then wipe with a cloth or rinse thoroughly with water under pressure. Repeat the process in case of a particularly stubborn one. Especially designed for external washing of all engines and engine compartments; It is a very effective detergent. It is also used for motorcycles. It does not contain an unpleasant odor. It is easy to apply, works in minutes even without using pressurized water for rinsing. It does not contain hydrocarbon solvents. It is suitable for external washing of all engines and engine compartments. It does not harm painted, rubber and plastic surfaces.

We have the complete range of Explosion Proof Solenoid Valves which are having the following qualities Product Details Explosion Proof Solenoid Option is available for all the solenoid valves of the rotex.Different materials (Brass, Ss316, Aluminium) available Larger range of orifices (from 0.8 mm To 80 mm) Solenoid withexplosion-proof enclosure (Atex,Inmetro,Ul,Ccoe,Isi Approved) Low Power(5 W And 0.4w)solenoid coil available Intrinsically safe solenoid coils with circuit available All different constructions i.e.diaphragm operated,piston operated,internal/external pilot operated,spool design, puppet design, zero differential solenoid valves etc are available Also pneumatic and magnetic latching coil with exd enclosure available. Also manual reset valves and low power valves are available with exd enclosure. We are famous for manufacturing custom made valves at very competitive price. We are the suppliers to Indian railway, power plants, refineries, cement plants, pharma, etc.

The advertising racket boards are manufactured as fixed and mobile. Resistant to climate conditions, gaseous piston thrusters are used for easy opening and closing. The moving panels are double sided with banner changer and 3 advertisement banners on each side can be displayed at desired time intervals. This bus shelter light box is created specially for cities. Made of solid materials, it is extremely durable. External streamline design makes the product more attractive and fashionable. Its detachable structure designed by leading technology in this field facilitates the ease of assembling and operation. Nowadays, this product is widely utilized in various large cities. Additionally, this device is antirust, maintenance free and easy for removing misgivings of users.

Block-Body Ball Valves for Manifold Mounting BBV35 ▪ Three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors ▪ Pressure inlet possible from center port only ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve) Block-Body Ball Valves for Manifold Mounting BBVS35 ▪ Three-way high-pressure block body ball valves designed for use as three-way selectors (L-bore, 90° operation) for hydraulic applications ▪ Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors ▪ Pressure inlet possible from all ports ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of...

Highly polished multiple design socket with external hand/foot switch, 2 permanent sockets and overload protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. Optical function display for overload protection. Robust and shapely hand/foot switch with a very flexible 1.5 m control line. A RJ-11 connection makes switch pluggable and extendable, which enables for a very easy and flexible installation. 2 permanent and 5 sockets which can be switched off. Switching status display on hand/foot switch. Shapely and stable enclosure due to polished, highly break-proof polycarbonate. Option of variable cable output on both sides. Sockets arranged at 90° angles. Childproof sockets. With mounting facilities for wall installation. In blister packaging. Patent pending. Cable length: 2 m Cable: H05VV-F 3G1,5 Length approx.: 55 cm Socket: 2 Permanent 5 Switchable Nominal current: 16 A Plug-in system: DE Interference filter: - Colour: Black

Block-Body Ball Valves for Manifold Mounting BBV25 ▪ Two-way high-pressure block body ball valves designed for use as on/off devices for hydraulic applications ▪ Block body design for manifold mounting with either 4 or 6 mounting holes for added safety; improved manifold design eliminates external piping and connectors ▪ Pressure range: up to 500 bar / 7250 PSI (depending on size and material combination of the ball valve)

Simple and secure pushtoconnect type! Big flow rate! Endface seal design. Gives excellent handling touch. Just push the plug into the socket for simple and secure connection. This reduces connection time and improves efficiency. New valve design for low pressure loss to achieve flow rate increase (15% up over the conventional model). Endface seal is achieved when connected. Low connection resistance allows easier connection/disconnection. No seal damage caused by exhausted lubricant is observed and the handling is superior to external Oring design. Available only with steel body. Not suitable for water or oil. Tube Fitter type is available for pushtoconnect operation.

This type of Chains are Standard External Chains and They are designed using the sub-structure of DIN 8187, DIN 8188 and DIN 8181 Standard Chains.

Waste incineration plants, refuse-derived fuel (RDF) incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding ropes. Technical design Low-maintenance or maintenance-free for increased profitability 4-rope grab with half-closed grip Suitable for handling waste of any kind Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Rigidly mounted main casing to accommodate the lower rope pulleys, easily move the ropes and reduce wear on them even when the crosshead is at an angle whilst the grab is being operated Solid, removable rope guards Rope pulley bearing: Re-greaseable plain bearing KROGER MAINTENANCE-FREE pulley block system Grab connection bearing: Re-greaseable steel bushing bearing KROGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N with a wear-resistant edge recessing made of Pantanax steel

The corner element is made of heat-resistant plastic and is necessary for the design of external corners, protrusions of the room connecting the individual modules of the warm skirting board. Available colors: white, brown, gray

Oswald Metzen, a METZEN Industries’ brand, is specialised in conveyor technology. We provide you with everything you need under one roof: from planning to production and assembly of our innovative, custom conveyor technology which meets the highest quality requirements. Our conveyor systems portfolio: Screw conveyors Construction of silos, containers and their dispensers Belt conveyors Link conveyors Roller conveyors Rotary tables Bucket lifts Two-shaft shredders Big bag systems Transfer lines/return conveyors with inclined lifts Turning stations Transfer devices Pallet conveyors/changers Interlinking systems Chip conveyors We apply our senior engineers’ expertise in the latest technology and our certified welders’, fitters’, steelworkers’ and electricians’ years of experience to our work in our high-tech manufacturing centres and in your plant. We create in-house or externally designed components and systems. We can step in if you require short-term

Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding cables. Technical design Designed as a discharge grab with stable, retracted pivot bearings Optimisation of crane load capacity thanks to its lightweight design which can hold maximum loads Self-locking grab suspension for crane hooks Grab drive: Vertical electrohydraulic drive unit with high-pressure pump Closing and opening movements are controlled through clockwise or counter clockwise rotation of the electric motor (turn control). The electric motor is only switched on whilst the closing and opening movement is being performed. Closing and opening movements controlled by directly connected hydraulic cylinders, with stable piston rod protection Grab connection bearing Re-greaseable, robust steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Grab shells: Shell design adapted to material flow Toothed segment drive Material: S355J2+N

Slag handling in waste incineration plants or incineration plants of any kind. For various types of cranes with internal or external holding ropes. Technical design Low-maintenance or maintenance-free for increased profitability Transverse or longitudinal suspension with 4-fold, 5-fold and 7-fold rope reeving; as a 4-rope grab High load capacity thanks to its lightweight design Smooth grab thanks to its low centre of gravity and because the rope’s diameter matches that of the pulley Closing rope devices: Rope nozzles KROGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Lower pulley block unrestrained on the crossbeam Rope pulley bearing: Re-greaseable plain bearing KROGER MAINTENANCE-FREE pulley block system Grab shells: Material: S355J2+N Cutting edge material: special, highly wear-resistant steel Grab connection bearing: Re-greaseable steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system

Handling general scrap, car bodies, steel chips, shredder scrap, paving stones and much more, in sea and inland ports. For pier engineering and riverbed maintenance. For various types of cranes and excavators with internal or external holding ropes. Technical design As 2-rope and 4-rope grabs with open, half-closed or closed grip Suitable for handling scrap, stones, waste and other difficult to grab goods depending on design Closing rope devices: Rope nozzles KRÖGER MAINTENANCE-FREE, rope-protecting, roller-bearing pulley system Rigidly mounted main casing to accommodate the lower rope pulleys, easily move the ropes and reduce wear on them even when the crosshead is at an angle whilst the grab is being operated Rope pulley bearing: Re-greaseable plain bearing KRÖGER MAINTENANCE-FREE pulley block system Grab connection bearing: Re-greaseable steel bushing bearing KRÖGER MAINTENANCE-FREE bearing system Stable shell structure with shells made out of S355J2+N.