Exterior lighting - Import export

The MG STREET street lamp provides high brightness of external lighting. The waterproof case is made of an aluminum alloy. The profile perfectly gives off heat in the air, without overheating light-emitting diodes. The MG STREET provides mounting to the console, overhead or suspended method. The entire system and electronic components are designed and protected in such a way that the luminaire runs smoothly, both in summer and winter. This saves on energy consumption for many years. Housing – aluminum The source of the glow is a line board with soldered LEDs Fastening – on the console LEDs – OSRAM Light color – 4000 / 6000K Light efficiency – 140Lm / W Packaging – the luminaire is delivered assembled, ready for installation Fire safety class – PIII Degree of protection – IP67 Color rendering index – Ra> 90% Climatic design (operating temperature range) – UHL4 (-10…. + 40 ° С) Ripple factor -> 1% Mechanical stability – M1 Class of protection against electric shock – I

153Wh of capacity LifePO4 battery, 20W to 80W power range, MPPT Charge controller, 12 high efficiency LED, 1750 lumen, 44W monoperc 5-bus bar PV panel, and the lamp could be dimmable, and has motion smart control. Lens brand is Ledil and optical lens efficiency is %94. Its weight jsut 8kg.

CC/CV LED Driver with short circuit protection and universal input voltage range as 90V to 240VAC. Up to %98 efficiency and low THD as <%15. Power factor is more than 0,95. And our high quality product has UL and LM-80 certification. 12V/24V/48V and 54V DC output,

*Available in 30W to 200W *High efficiency up to %98 *CosQ 0,97 *Low THD below %10 *Universal Input voltage 120V to 240V 50/60Hz *Certificated with UL and LM-80

Manufactured with a 35 year design Life. Ultrasonically welded, Hermetically sealed. Utilizes Westire's Unique Relay assisted switching technology.and Zero Cross switching technology. Gurantees the most accurate evening to evening ambient light level switching accuracy of any photocell on the market. Offering unrivaled reliability and long life.

Plug to seal the luminaire socket receptacle and creats a linke between Live in and Load out. Keeping the light permanently on for remote switching or group control Variants available with surge protection build on.

Extruded aluminum body with anti-corrosion surface treatments let us to use the Fortress lighting column for lots of outdoor application areas such as garden, avenues, public zones and lots of commercial building landscape areas. We are using symmetrical wide beam light distribution on this unique design urban lighting pole for a high degree of illuminance on the ground surface. Led color temperatures (3000K, 4000K and 6000K), and medium or wide beam angles available and also, it is uitable for illumination up to 4,5 meters height.

Lighting poles, camera poles, high mast projector poles, decorative poles, energy transmission poles

Classic collection but contemporary treatment for this transparent collection with its entirely glazed sides. The most interior of our exterior lanterns with a light that does not encounter any obstacle, it will perfectly illuminate a stairwell for example.

Classic collection but contemporary treatment for this transparent collection with its entirely glazed sides. The most interior of our exterior lanterns with a light that does not encounter any obstacle, it will perfectly illuminate a stairwell for example. This lantern must be associated with one of the hooks from our catalog.

Classic collection but contemporary treatment for this transparent collection with its entirely glazed sides. The most interior of our exterior lanterns with a light that does not encounter any obstacle, it will perfectly illuminate a stairwell for example. This lantern must be associated with one of the hooks from our catalog.

Classic collection but contemporary treatment for this transparent collection with its entirely glazed sides. The most interior of our exterior lanterns with a light that does not encounter any obstacle, it will perfectly illuminate a stairwell for example. This lantern must be associated with one of the hooks from our catalog.

A gentle sea breeze hovers over the Belvédère Collection! Wall light or pendant light, interior or exterior, Belvédère is characterized by its distinctive glass and subtly tapered shape, a unique design feature that makes it stand out.

TECHNICAL DEFINITION Ultra-light ready mixed filler for repair of interior or exterior walls and ceilings. Shrink free and fast drying, SEM-LIGHT is ideal for high quality filling jobs and is very ease to use. COMPOSITION AND APPEARANCE Resins in emulsion with lightening agents and various additives. The paste is snow white. ACCEPTED SUBSTRATES Interior and exterior walls and ceilings • Plaster • Masonry • Cellular concrete • Concrete • Plasterboard • Roughcast • Wood • Cement render TECHNICAL CHARACTERISTICS • Density : 0.4 • pH : 7 • Shrink-free filling • Excellent application qualities STORAGE 12 months in unopened original packing protected from frost and extreme heat. PREPARATION OF SURFACES BEFORE APPLICATION The substrates must be clean, free of dust and any trace of formwork release oil. Indoors, during hot weather or on absorbent substrates the surfaces may be dampened slightly. Cracks should be opened up before application.

Dims streetlights to pre determined levels throughout the night. Saves up to 60% energy consumption. Works will all DALI2 D4I LED Drivers. Works with TE Zhaga Motion sensor switching light on at 20% power output, increasing to 100% on detection of motion, returning to 20% power output after 2 minutes. ANSI & Zhaga Book 18 compatible

Uses ANSI/NEMA Twist Lock socket to measure electrical power & characteristics of DALI driver

Designed to be extremely discrete fitting within the light fixture. Accurate light level switching with 10 Amp load rating. Encapsulated for harsh environment and to combated luminaire or fixture condensation

6.50m x 2.55m dimensions with wooden paneling on the exterior, carcass made of ST52 Galvanized mild steel, torsion axles with a carrying capacity of 3500 kg. In accordance with the exterior visuals, clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5cm 120 density stone wool heatsink between roof, floor and walls insulation, Bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and tap installation, sanitary ware Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lacquered cabinet, sink, kitchen mixer installation, electrical installation with fire-proof cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double-glazed joinery, air conditioning system prepared according to 12.

7.00m x 2.55m dimensions with wooden paneling on the exterior, carcass made of ST52 Galvanized mild steel, torsion axles with a carrying capacity of 3500 kg. In accordance with the exterior visuals, clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5cm 120 density stone wool heatsink between roof, floor and walls insulation, Bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and tap installation, sanitary ware Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lacquered cabinet, sink, kitchen mixer installation, electrical installation with fire-proof cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double-glazed joinery, air conditioning system prepared according to 12.

6.50m x 2.55m sized torsion axles with wooden paneling on the exterior, carcass made of ST52 Galvanized mild steel, 3500 kg carrying capacity. In harmony with the exterior visuals, clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5 cm 120 density stone wool heatsink between roof, floor and walls insulation, Bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and tap installation, sanitary ware Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lacquered cabinet, sink, kitchen mixer installation, electrical installation with fire-proof cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double glazed joinery, air conditioning system prepared according to 12.

8.00m x 2.55m sized wooden paneling on the exterior, ST52 Galvanized light load manufacturing, 3500 kg carrying capacity torsion axles. In harmony with the exterior images; clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5 cm 120 density stone wool heatsink between roof, floor and walls insulation, bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and faucet installation, sanitary ware accessories Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lake cabinet, sink, kitchen mixer installation, electrical installation with fire resistant cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double-glazed joinery, air conditioning system prepared according to 12.

ETC Source Four Zoom XT 150W 15°-30° white ETC combines the industrys standard Source Four Zoom optical system with a unique, waterlight housing to create the Source Four Zoom XT. Powered by the 12.000 hour Master ColorTM CDM lamp, Zook eX is rated IP 65 for exterior lighting use and is ideal for gobo / pattern projection and tight shutter cuts on specific structures or architectural details. The forward portion of the housing removes completely for beam sizing, focus, gobo insertion and shutter cut adjustments. The removable housing is designed to hang conveniently on the yoke, freeing both hands for focus. ETC Source Four 150W HID Zooms are supplied with Philips CDM Master Color 150W veramic metal halide lamp, colour frame and 1,8m cable without connector. Feature Physical Rugged, the cast and extruded aluminium construction unique waterlight exterior housing seal Precision extruded optical rails with positive lens position lock-down 20 gauge stainless steel shutters in a tri-plane assembly Roating shutter assembly +/- 25° slot for glass or stainless steel gobos / patterns waterlight electronic ballast housing Tilt-down ballast housing for convenient lamp change CE compliant Electrical » ≫ 150W electronic ballast (yoke mounted) » ≫ Less than 14 Amps inrush current, lasts less than one AC cycle (16.7mS) » ≫ Select breakers that meet or exceed the in-rush and ampacity requirement » ≫ Less than 10% Harmonic distortion » ≫ Greater than 95% Power Factor » ≫ 90% Ballast Efficiency » ≫ 230V ± 10%, 50-60Hz » ≫ 0.74A operating current Optical » ≫ Optimised optical system for improved photometric » ≫ performance and field uniformity » ≫ Faceted borosilicate reflector with dichroic cold mirror coating removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light » ≫ Reflector and lenses secured with anti-vibration shock mounts » ≫ Two bi-convex lenses with anti-reflective coatings » ≫ Low gate and beam temperature, shutters will not warp or distort Lamp » ≫ 150W Ceramic metal halide150W Philips MasterColor ® CDM lamp » ≫ 3000 K colour temperature » ≫ 12,000 hrs. lamp life » ≫ Optional 150W Philips MasterColor CDM 4,200K colour temperature (96 CRI) lamp available » ≫ IP65 » ≫ mass: 78,5x27,6x25,9cm » ≫ beam: 15° - 30° » ≫ weight: 16,3kg Konformitätserklärung source four

Lighting is an integral part of your event, it will set the mood and ambience of an evening. We offer choices of Chandeliers, LED Uplights & Pin Spots. We can also supply exterior lighting to your London marquee wedding venues to add enchantment to tree’s & ponds etc. ** Ask for a quote **