• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • exhaust filters

Results for

Exhaust filters - Import export

United Kingdom

UKF Group stocks one of the largest ranges of perforated exhaust tube in Europe. Our Perforated Exhaust Tube finds application with automotive exhausts, and filtration systems. We offer standard 6011 pattern in Stainless Steel Grade 304 (1.4301) and Grade 409 (1.4512), from stock, in lengths up to 6 metres. Custom lengths and alternative patterns are available upon request.

Request for a quote

Germany

Verified by Europages

You will find in our assortment: Exhaust air filters of different qualities e.g. M dust class, also in wet-proof, L dust class Micro-hygiene filter, one of our novelties in the assortment Micro-hygiene-filter + exhaust air filter in a set Motor protection filters in various diameters, thicknesses and designs for vacuum cleaners of well-known manufacturers

Request for a quote

Turkey

Verified by Europages

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Request for a quote

Germany

Verified by Europages

The range of suitable accessories of well-known vacuum cleaner manufacturers is wide and constantly growing. Some examples are floor nozzles in various designs, exhaust air motor filters, telescopic tubes, bio waste bags, household filters, fragrances to absorb and much more.

Request for a quote

Germany

Verified by Europages

• Special sound insulation to less then 80 dB(A) • For manual blasting of small components, tools etc. • Exhaust system with filter, silencer and fan incl. • Connectable to every exhaust system • The blasting pistol can be used manually or mounted to the cabin (via foot switch)

Request for a quote

South Korea

Verified by Europages

Ceracomb has its own technology to make and supply ceramic honeycombs and catalysts all together. we coat catalysts into the ceramic substrates for each purpose. Ceracomb supplies their catalysts for Automobiles and various industries. 1. DOC (Diesel Oxidation Catalyst) - DOC Catalyst efficiently oxidizes SOF among CO, HC, PM from diesel exhaust. 2. DPF (Diesel Particulate Filter)- DPF(Catalyzed DPF) oxidizes CO and HC which are not eliminated completely by DOC and help soot regeneration. 3. SCR (Selective Catalytic Reduction) - SCR Catalyst removes NOx from diesel vehicles. In the SCR process, NOx 4. AOC (Ammonia Oxidation Catalyst) - It is a catalyst to remove ammonia emitted from semiconductor processing and SCR post – processing devices. 5. TWC (Three Way Catalyst)- TWC converts HC, CO, NOx exhausted from gasoline vehicles into CO2, H2O, N2 [Application] - Replacement filter of DPF Converter - PM-NOx ATS - TWC Conveter for gasoline & LPG vehicles

Request for a quote

France

Verified by Europages

Stroke X axis: 650 mm Max. Stroke speed X axis: 4000 mm/min Working feed X axis: 0 - 1800 mm/min Stroke Y axis: 450 mm Working feed Y axis: 0 - 1800 mm/min Stroke Z axis: 130 mm Min. Stroke speed Z axis: 0.5 mm/min Max. Stroke speed Z axis: 12000 mm/min Stroke frequency Z axis: max. 4 Hz Stroke W axis: 500 mm Planetary speed C axis: 5 - 250 rpm Max. Stroke speed W axis: 800 mm/min Stroke U axis (radial feed): 5.5 mm Distance between columns: 750 mm Table length: 770 mm Table width: 630 mm Clearance between grinding motor and table: 585 mm Max. load on table: 500 Kg Supply voltage: 400 V Weight: 4550 Kg EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor x1 cable for grinding motor Machine visible under power in our premises by appointment.

Request for a quote

Turkey

Verified by Europages

Fleetmaster CK-4 Extreme 15W/40 stands as a formidable API CK-4 heavy-duty diesel engine oil, expertly crafted with cutting-edge synthetic technology-based oils. It’s engineered to meet the demands of high-speed, four-stroke diesel engines operating in severe conditions, including those equipped with Diesel Particulate Filters (DPF), cooled Exhaust Gas Recirculation (EGR), and other advanced exhaust treatment systems. This versatile oil is suitable for both turbocharged and naturally aspirated engines. What sets Fleetmaster CK-4 Extreme 15W/40 apart is its commitment to providing superior durability and protection. It accomplishes this through enhanced shear stability and reduced oxidative thickening, effectively mitigating issues like abrasive wear, bore polishing, and piston deposits.

Request for a quote

Turkey

Verified by Europages

PRODUCT DESCRIPTION Fleetmaster CK-4 Extreme 15W/40 stands at the forefront of API CK-4 heavy-duty diesel engine oils, harnessing the power of cutting-edge synthetic technology-based oils. It’s purpose-built to excel in demanding, high-speed four-stroke diesel engines equipped with Diesel Particulate Filters (DPF), cooled Exhaust Gas Recirculation (EGR), and other advanced exhaust treatment systems, catering to both turbocharged and naturally aspirated engines. This exceptional oil is meticulously engineered to provide superior durability and protection, achieved through enhanced shear stability, reduced oxidative thickening, and mitigated issues such as abrasive wear, bore polishing, and piston deposits. Fleetmaster CK-4 Extreme 15W/40 is a versatile choice, suitable for 2017 model vehicles and those complying with Euro VI emission standards. It can seamlessly replace CJ-4 engine oils, offering a convenient transition for users.

Request for a quote

Netherlands

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Request for a quote

Netherlands

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Request for a quote

Netherlands

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Request for a quote

Netherlands

Every Pro is delivered with our BRM quality checklist and includes all the components needed to get started and use the machine as optimally as possible: A water chiller, air pump, autofocus, red pointer, software-controlled air valve, timed exhaust shutdown, non-filtering fume extractor, honeycomb and slat table, LightBurn software, maintenance set, our manual and two lenses.

Request for a quote

Hungary

The CL series offers medium capacity ranging from 900 to 5100m³/h, it is widely used in many application including: autoclaves, carburetor testing, chucking, condenser exhausting, container filling, cooking, drying, evisceration, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, molding, pickup and conveying, priming, slot extraction, and solvent recovery. Different with most India cone pump, we are using castings from best domestic foundries,all castings are provided with related material test report . We offering SS420 shaft for all our cast iron pump, it is more reliable in performance and offer longer using life thanIndiaand original Nash CL liquid ring vacuum pump. To meet client’s different installation requirement, we offer both DIN and ANSI flange connection. All our CL liquid ring vacuum pump is 100% performance tested before shipment.

Request for a quote

Germany

Force-of-gravity separators, which are used as pre-filters or for the separation of large quantities of dust and swarf. Cyclone separator Cyclones are force-of-gravity separators. The separation principle is based on centrifugal force, which is produced by the tangential injection of the raw air. Cyclones are used as pre-filters or for the separation of large quantities of dust and swarf. The degree of separation of a cyclone is not normally sufficient to meet the usual environmental protection requirements. The cyclone exhaust air must be post-filtered in most cases. Product description A cyclone essentially consists of three parts: the intake cylinder, the cone and the immersion tube. In the intake cylinder, the raw air is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air stream and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube. Cyclones are usually welded sheet steel structures. Cellular wheel sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

Request for a quote

Germany

The term inline filter refers to an expandable, bolted, modular system. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 10,000–300,000 m³/h. RS / RX filter The RS / RX series are a proven, expandable, modular system with low-pressure purge-air cleaning. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 20,000–300,000 m³/h. RS / RX filters are suitable only for vacuum and positive pressure operation. The housing parts are usually made of 2 mm thick galvanised sheet steel. A thicker material in a painted execution as well as in stainless steel is also optionally available. The RS / RX series is 2.85 m wide. Filter hose lengths of 3 m (standard) and 4 m are available for this. The RSEC series has been designed for smaller air quantities and for above-roof installation. This series has a housing width of 2.4 m and 2 m-long filter hoses. The filter hoses are manufactured from polyester needle felt; the filtering direction is from the outside inwards. Filter cartridges and filter tubes are alternatively possible. The filter hoses are cleaned off using the material-preserving low-pressure purge-air system. The purging trolley inside the clean air compartment drives over the hose openings either continuously or controlled by pressure. In the direction of movement the first filter hose row is neutralised, while the second row is flushed from the clean air side. The third row is likewise neutralised. This results in a draught delay, which is necessary in order to allow the dislodged dust to fall into the discharge. The dust is discharged by a tried-and-tested drag conveyor with a downstream cellular wheel sluice. The return air pipes are provided with fire protection flaps and switching devices for exhaust air operation. The filter housing has been tested for resistance to pressure surges. Standard safety devices include likewise tested explosion pressure relief devices, fire extinguishing systems, mechanical and thermal monitoring systems as well as pressure-surge-resistant and flameproof cellular wheel sluices. The transport fan is arranged on the clean air side and is not exposed to swarf and dust. Hence, the conditions of a dust explosion zone do not prevail in the transport fan. RSV/RXV filter This series essentially differs from the RS/RX series in that its fans are arranged on the clean air side. RSV/RXV filters are suitable only for vacuum pressure operation. The capacity range extends from approx. 20,000 - 300,000 m³/h. The filter hoses are likewise cleaned off using the material-preserving low-pressure purge-air system.

Request for a quote

China

capturing mist from spray booth and painting equipment systems or adsorping the soot from kitchen chemical industry, finally, make the exhaust gas environmental. Filter material and features: Fiber glass with gradual density, inlet side is green or yellow, outlet is white Low compressibility, even under heavy paint-load. High arrestance, especially under high paint spray exposure, economical. Progressive structure, the density of fiber layers increases towards the clean air side. The whole depth of the nonwoven can be used for the dust storage. Certified EN779 Temp.resistance: 170℃ Served in roll or piece

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

Request for a quote

China

The open-front design saves valuable floor space and makes it easy to move products and parts in and out of the booth. Also we can custom design an open face paint booths to meet your requirements. Cabin specifications: Galvanized sheet wall panel External size: 2080*2040*3000mm Internal size: 2000*2000*2300mm With paint mist filter collector With exhaust fan with Explosion-proof Power: 2.2KW Wildly use in training center, metal sheet center, 4S repair shop, painting seller, furniture factory..

Request for a quote

Germany

COMBER Pressofiltro® Series PF 50 - PF 2000 with Containment System Pressofiltro® agitated Nutsche filters or filter dryers with containment system provide protection of the operators against hazardous materials and equally provide product or process safety against possible contamination from external particles. Special properties for the customer’s benefit: Containment systems (glove boxes) are designed to allow contamination free sampling, product discharge, heel removal and product pack-off into suitable containers Containment systems are available as passive, active, single chamber, two chamber and multiple chamber designs, all in compliance with cGMP and FDA guidelines Active isolator units are equipped with air handling systems and HEPA inlet and exhaust filters for containment levels down to 10 ng/m³ TWA The isolator design permits sampling, product discharge, pack-off, heel removal and filter cloth disposal in a single unit Sample and small items transfer using optional...

Request for a quote

Germany

A bio scrubber combines physical scrubbers with a biological activation unit. In this process, air polluted with a wide variety of pollutants is cleaned with the aid of a washing liquid which is loaded with microorganisms and biocatalysts (various enzymes) taken from nature. The washing water absorbs the exhaust air and pollutants from the air. Subsequently, added microorganisms oxidise them. These microorganisms use the air pollutants as substrate and nutrient medium and convert them into naturally formed decomposition products such as CO2, water, and biomass. Here, the washing water is continuously regenerated and used in a closedcircuit water treatment system. TYPICAL APPLICATION AREAS These plants are primarily used for watersoluble ingredients of the exhaust air. The usual pollutants that are filtered from the exhaust air with the help of bio scrubbers include aldehydes such as formaldehyde, alcohols, ketones and other hydrocarbon compounds.

Request for a quote

Germany

When it comes to filter material, there are a few points to consider. The filter material should have a large surface area. This ensures a good exchange rate between exhaust air and filter material and provides sufficient space for microorganisms to colonise. The filter material must be designed in such a way that it has a good water holding capacity. The colonised microorganisms are only viable in a moist environment. In general, different filter materials are used in one batch. The reason for this it ensures both a good stability of the filter bed and a larger surface. In addition, the added microorganisms must be sufficiently supplied with inorganic nutrients and trace elements, unless this is provided by the composition of the exhaust air. The temperature inside the biofilter system plays a decisive role as well. Temperatures between 5 °C and 40 °C are favourable for the microorganisms to work properly.

Request for a quote

Russia

Electrical and electronic equipment mounted inside a cabinet generate heat that raises the temperature internal air. Over time, the ever increasing heat can cause sensitive devices to malfunctions. Additionally, heat accumulation can cause circuit breakers to trip which can result in system shut down. Fan filter units are used for enclosure climate control to dissipate heat from within the enclosure to prevent the premature failure of the equipment inside it. It helps to increase an operational reliability and a service life for electrical and electronic systems. Filter fans will cool enclosures to a level slightly above the ambient temperature outside the cabinet. To cool enclosure contents, the fans draw filtered ambient air into the cabinet. At the same time, the heated air within the cabinet is blown out an exhaust. The exhaust is also filtered which creates airflow resistance and a slightly higher pressure inside the enclosure.

Request for a quote

Germany

The compact electrode housings of our treatment stations are used for the reliable extraction of the ozone created by the corona treatment. Exhaust monitoring is an integral part of all corona stations and ensures that a corona discharge can not be activated without suction. The ozone is extracted by a pipe work and discharged to a safe height into the external atmosphere. To reduce the ozone load of the ambient air and comply with local environmental and health and safety regulations the extracted air can be passed directly into an ozone catalyser. Our ozone catalyser is a high performance filter unit designed specifically for ozone destruction in Corona treatment. Since ozone is extremely corrosive, all materials and seals used are corrosion resistant. The housing and all internals are made from corrosion resistant stainless steel. For reliable treatment of the exhaust air, three filter stages are contained within the housing.

Request for a quote

Turkey

We provide high quality service with our hydraulic pipe drilling machine. With the Pipe Drilling Machine we have built, "Exhaust Muffler, Filter, etc." We produce the products used in the fields without burrs. According to the orders you have given, we can draw technical drawings and produce the products you want. Our staples are available in our inventory as Ø3 / Ø3.5 / Ø7. Our machine supports up to Ø65.

Request for a quote

Germany

100 - 3600 CFM / 170 to 6,100 m³/h The NASH SC vacuum pump and compressor, which replaced the popular NASH CL pump in the 1980's, is still being manufactured at Gardner Denver Nash. The SC pump, more flexible and simpler to install and easy to maintain, made it a very reliable pump to be used in many applications. SC pumps are found in applications including: autoclaves, chucking, container filling, labeling and forming, cooking, deaerating, deodorizing food and fats, drying, evaporating, eviscerating, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, laboratory central vacuum systems, medical and dental vacuum draining, molding, pickup and conveying, priming, slot extraction, and solvent recovery. All SC models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing SC pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate SC pump, Gardner Denver Nash is there for all of the above.

Request for a quote

Germany

170 - 14000 CFM / 240 to 23,700 m³/h The NASH CL Vacuum Pump and Compressor product line is perhaps the most popular ever built. There are 12 different models, from the CL-200 through the CL-14000, with capacities ranging from 150 CFM to over 14,000 CFM. They can be found in many applications including: autoclaves, carburetor testing, chucking, condenser exhausting, container filling, cooking, deaerating, drying, eviscerating, exhausting, extruder venting, fiber setting, filtering, forming, gas stripping, molding, pickup and conveying, priming, slot extraction, and solvent recovery. All CL models are still available from Gardner Denver Nash, the original designer and manufacturer. Whether you have an existing CL pump running in your plant that is in need of service, repair, or replacement with a new or remanufactured duplicate CL pump, Gardner Denver NASH is there for all of the above. Gardner Denver Nash continues to manufacture and offer the CL to our customers.

Request for a quote