Equipment and accessories for heating - Import export

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climatic cassette-type panels operate on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. Functionally it is a low-temperature energy saving infrared emitter. The heat carrier is water preheated by any hot water boiler, central heat supply or alternative source (for example, heat pump). Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Discover high-quality technical plastic injection molded parts for vehicle construction at EWOQE! As an experienced partner to the automotive industry, we offer customized solutions for a wide range of applications, from interior components to technical parts for chassis and powertrain systems. Our dedicated team utilizes state-of-the-art manufacturing technologies and high-quality materials to ensure that our plastic injection molded parts meet the highest quality standards. We understand the demands for durability, resistance, and functionality in vehicle construction and design our products accordingly. Whether you need components for electric vehicles, internal combustion engines, or hybrid vehicles, we are your reliable partner for technical plastic injection molded parts. Rely on our expertise to meet your requirements and achieve your production goals. Contact EWOQE today to learn more about our tailored solutions for vehicle construction and to advance your projects.

Floor heating systems

The module of a warm plinth "Orioten" is created for heating of the room and can be used as the main (consists of several modules), and additional heating of the room. Available colors: white, brown, gray

The corner element is made of heat-resistant plastic and is necessary for the design of external corners, protrusions of the room connecting the individual modules of the warm skirting board. Available colors: white, brown, gray

The corner element is made of heat-resistant plastic and is necessary for connecting individual modules of a warm baseboard in the inner corners of the room. Available colors: white, brown, gray

The connecting element is made of heat-resistant plastic and is necessary for connecting individual modules of a warm baseboard. Available colors: white, brown, gray

The end element is made of heat-resistant plastic and is necessary for the design of the ends of the modules of the warm skirting board. Available colors: white, brown, gray

Installing an air source heat pump is one of the best routes to savings with amazing returns for home and building owners. For every 1kWh of energy consumed the heat pump can produce up to 5kWh of thermal energy. Our heat pumps typically pay for themselves within 3.5 years or even less if you receive government subsidies or a grant for the system. The TermoPlus® air-source heat pumps require a combination of two units – an indoor unit and an outdoor unit. The indoor unit can either be a Hydrobox, which provides heating only, or a Hydrotank which produces both heating and domestic hot water (for showering, dishwashing etc.). The TermoPlus® air source heat pump range is designed to work with Mitsubishi outdoor units that provide both heating and cooling: either a Power Inverter unit or a Zubadan unit. The main difference between the two is that the Zubadan can operate in colder environments than the Power Inverter.

Stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings. They are used for the distribution of water and for isolating and balancing flow in heating and cooling circuits. This means that they can be used for the connection of radiators, ventilation / air conditioning units, as well as wall, ceiling and floor heating / cooling systems. Venting, flushing and flow balancing are particularly important to ensure trouble free and optimum operation in floor, wall and ceiling heating and cooling systems. The SANHA heating circuit distributors are equipped as standard with a safety filling and ventilation device as well as integrated flow meters or control valves. This allows a reliable, fast and thus cost-efficient execution of these measures.

SANHA®-Heat Pipe detector for searching for heating pipes in wall heating modules.

SANHA®-Heat Fastening set for wall heating modules for metal framed wall constructions.

SANHA®-Heat Fastening set for wall heating modules for wooden walls

Ready-to-install wall heating module with integrated heating register, 25 mm thick, 625 mm wide

Regulation station for fixed set point control, adjusting range 20-50 °C, electronically regulated circulating pump E4 auto- 130 mm, regulating valve with internal sensor, safety limitation, adjustable bypass and integrated non-return valve

SANHA®-Heat Distribution cabinet, surface-mounted, galvanically zinc-coated steel sheet, painted white (RAL 9010), with removable door and locking bolt, installation depth 125 mm.

SANHA wall heating modules are a completely new, space-saving system for room heating and cooling. The system is characterized by the exceptionally high living comfort it provides, the ease of installation, very high energy efficiency compared to conventional heating systems as well as its positive impact on our health. SANHA wall heating modules can be installed nearly everywhere, even in roof slopes.

Room thermostat AP, super flat, white, closed and currentless, with thermal recirculation

Aluminum reflectors are used for high luminous efficiency. It provides many years of trouble-free operation without the need for special maintenance programs. For your safety, there is a safety system with a buzzer against a malfunction. Usage areas: Factories, Workplaces, Warehouses, Hangars, Service Stations, Mosques, Sanctuary, Farms, Outdoor and other places. TECHNICAL FEATURES Product Code - 1st Power - 2nd Power -NG Consumption -Hanging Height**(H) ECO L5 - 6 kW - 11 kW - 1,15 m³/saat - 2,5 m ECO L10 - 11 kW - 18 kW - 1,90 m³/saat. - 3,5 m ECO L14 - 16 kW - 26 kW - 2,73 m³/saat - 4,5 m ECO L18 - 20 kW - 32,1 kW - 3,37 m³/saat - 5,0 m Natural Gas Pressure 20-55 mbar Gas Connector Diameter 1/2’’ Electric Voltage 220-240 V

SANHA stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings.

TEPLOPANEL climate system is based on principle of thermal infrared radiation. Infrared waves, without air heating, turn into heat while contacting with the surface of objects and people. Thus, the heated objects emit heat secondary and give it to the air by means of convection. The heat carrier in the radiant panels is classical preheated water. Thus, the water radiant panel is the best and the most effective energy saving infrared appliance, as it operates with water of up to 95°С. Water heating source operates on any type of fuel: gas, electricity, wood, pellets, waste oil, central heat supply. TEPLOPANEL system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room and allows to use infrared heaters in fire-hazardous objects. It enables to save up to 52% expenses of the energy carrier compared to air heating appliances. The higher the room the more savings you achieve.

The module of a warm plinth "Orioten" is created for heating of the room and can be used as the main (consists of several modules), and additional heating of the room. Available colors: white, brown, gray

The module of a warm plinth "Orioten" is created for heating of the room and can be used as the main (consists of several modules), and additional heating of the room. Available colors: white, brown, gray

SANHA®-Heat Fastening set for wall heating modules for concrete and masonry.

Electric infrared ceiling panels TEPLIY KVADRAT are low-temperature radiants for efficient heating of residential & office premises up to 4 m high. The system is based on principle of thermal infrared radiation. The advantage of transferring heat by radiation is the immediate effect of heating surfaces of objects that absorb heat from the panels, without preheating the air around them. Thus, all objects in the premises are heated, including floor, walls, furniture, equipment, etc. The heated objects emit heat secondary and give it to the air by means of convection. So, the system provides fast room heating, has low lag effect in comparison with any convective systems. Low temperature of heat distribution creates uniform temperature in the room. TEPLIY KVADRAT panels are designed for comfortable and energy-efficient heating of any kinds of rooms, except rooms with high humidity. The panels can operate directly from the socket or standard thermostat-controller.