Results for
WEINLICH GMBH & CO. KG
Germany
Transportable engine supports minimize the times of standstill of the engine test bed, as the engines can be built up and tested separately. The mounted engines can be coupled to the engine test bed quickly and without any effort. RWB mobile operation trolleys and Universal Engine Supports may be used with MP dynamometers and with other suitable dynamometers (by Weinlich or other manufacturers). Their modular design allows interchangeability and reusability. RWB are mobile thanks to swivel rollers. They have a load capacity of max. 800 kg. A RWB mobile operation trolley has a low base frame from which single supports lead up to the fixing points of the engine. By this design all parts of the engine can be reached as well as possible. Thanks to its solid and proven construction the mobile operation trolley is nevertheless able to match up to the stress during power tests. Universal Engine Supports have a higher load capacity (1000 kg and 2000 kg) than RWB. ...
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting VOLKSWAGEN Transporter T5 AXB/AXC 7H0199848G
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting Inner GOLF VII/PASSAT/TOURAN/A3/LEON/SUPE R B 1.2TSI-1.4TSI-1.6 TDI/2,0 TDI 5Q0 199 855 AA
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting POLO/FABIA/CORDOBA/IBIZA 02 6Q0199555AB/6Q0199555AT/6Q0199555AE/6Q0199555AD/6Q0199555AS/6Q0199555AA
Request for a quoteSIC HUNGARY RUBBER MANUFACTURING LTD.
Hungary
We have developed our silicone turbo charger / CAC hoses to always fit the requirements defined by SAE J20 Class A. Our silicon hoses can be ordered in different sizes and shapes so they are able to connect different kinds of engine mounted charge air cooler system parts. We produce charge air hose with convoluted shape that perfectly endure vibrations and works well even in case of mis-alignments. There are tow ways of manufacturing charge air hoses. Meta-aramid reinforced silicone hoses withstand a temperature range of -56 to +250 degrees Celsius while Polyester reinforced hoses withstand a range between -56 and 180 degrees Celsius. Materials Available with the option of fluoro-silicone or FKM inner linings for added resistance against oil and acid fuel. Hoses with metal fittings and crimped ends also can be developed on demand.
Request for a quoteURM - UNIVERSAL RUBBER MANUFACTURING NV
Belgium
Our silicone Turbo charger hoses are ideal for connections between engine mounted charge air cooler system parts. They come in a range of straight, shaped or convoluted shapes, as required. The convoluted shapes are required when there are slight misalignments during fitment or functioning. The hoses are flexible enough to endure the vibrations caused due to these misalignments/ compressions/ 3 axial movements. Working temp of 65˚C 200˚C doneAvailable with vent and integrated components doneResists corrosion from coolant and heat transfer More information Turbo Hoses are with Metal fittings and Crimped ends also can be developed as per your requirement . In URM house test rig available for life cycle testing of the hoses (cyclic pressures between 0 and 3 bars, while maintaining temperatures of up to 220 degrees Celsius, inside and outside the hose.) Industry use Turbo hoses are ideal for connctions between engine and mounted charge air cooler system parts
PARSMEGA MAKINA
Turkey
It enables the separation of flour mixed with bran. Thanks to its fast rotation and the pallets inside, it prevents flour loss by separating the flour from the bran. The angular shape of the specially made shirt ensures that the eyes remain open all the time. The rotor has been balanced. Thus, silent operation is ensured. The engine is mounted on the lower leg. The engine, pulleys and belts are covered with the help of a protection sheet, preventing work accidents from occurring. The rotor is fixed to both side bodies with cast bearings. The product whipped by the rotor is taken out through the perforated sheet.
Request for a quoteERDEM REFRIGERATION
Turkey
Combined Filter Drier and Liquid Receiver is an unit which hold Filter Drier and Liquid Receiver within a single body and performs as both at the same time. Having of the innovative design, the unit saves a great space. The function of the liquid receiver is to send the refrigerant fluid in 100% liquid state to the expansion valve for the best cooling effect. These series are produced for vehicle type refrigeration and air conditioning systems. They have high performance against the variable revolution of engine. ESSCV, Vertical mounting, ESSC, Horizontal mounting, ESSC / ESSCOD / ESSCOR / ESSCV Series Combined Filter Drier And Liquid Receiver ESSC / ESSCOR / ESSCOD / ESSCV Combined Filter Drier and Liquid Receiver series are hermetic designed to be used in compacted bead style for use on liquid line. Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention.
Request for a quoteREICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH
Germany
—>Highly flexible transfer element with high torsional elasticity —>High torsional vibration and shock load damping capability —>Compensation of misalignments and easy positioning of the drive and drive train possible —>Direct connection to flywheels according to specification Ready-to-install custom solution —>Diverse designs achievable with modular construction —>Compensation of axial, radial and angular displacements —>Radial (dis)assembly of the coupling element —>Maintenance-free —>Extended range of application due to Atex certification in accordance with Directive 2014/34/EU
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteALPIN RUBBER AND PLASTIC TECHNOLOGIES
Turkey
Harnessing cutting-edge technologies, we specialize in the production of precision-engineered rubber parts for the automotive industry. Our product range encompasses essential components such as engine mounts, bushings, grommets, suspension parts, and various other rubber-based components utilized in vehicles.
Request for a quoteGRIFFING D.O.O.
Slovenia
A classic round door lever with a decorative groove at the end of the round handle. Always elegant and simple, the groove is the icing on the cake of this door handle, which is supported by a precision-engineered mount that hides behind the handle when facing the front door. Door lever must be assembled by front door producer!
Request for a quoteGRIFFING D.O.O.
Slovenia
A classic round door lever with a decorative groove at the end of the round handle. Always elegant and simple, the groove is the icing on the cake of this door lever, which is supported by a meticulously-engineered square mount, which visually enhances the sophistication of the door lever. Door lever must be assembled by front door producers!
Request for a quoteNINGBO FRIMA INDUSTRY CO. LTD.
China
NC Turned Automotive Pins are a specialized type of pin that is used in the automotive industry. These pins are made using a CNC turning process and designed to meet specific requirements of the automotive industry. Automotive pins are used in various applications, such as engine and transmission mounts, suspension and steering components, or body panels. CNC Turned Automotive Pins are made from high-strength materials that can withstand rigorous automotive environments. The pins are precision-machined to tight tolerances, ensuring a perfect fit and function for the intended application. CNC Turned Automotive Pins come in a variety of sizes and designs to meet specific needs of the automotive industry. CNC turned automotive pins can be made from a variety of materials, each with its own set of benefits and drawbacks.If the material you required is not listed in the table, please contact us.
Request for a quoteSHORE AUTO RUBBER EXPORTS PVT. LTD.
India
Our Silicone Turbo charger / CAC hoses and Air Intake Hoses also maintain a minimum of SAEJ20 Class A specifications, unless otherwise specified by the customer. The hoses are ideal for connections between engine mounted charge air cooler system parts Also used to deliver pressurized intake air to the charge air intercooler and intake manifold They come in a range of straight, shaped or convoluted shapes, as required. The convoluted shapes are required when there are slight mis-alignments during fitment or functioning. The hoses are flexible enough to endure the vibrations caused due to these mis- alignments/compressions/3-axial movements. Temperature range: -56 to + 220 degrees Celsius (-70 to + 430 Fahrenheit) if reinforced with meta-aramid (Temperature resistance can be increased by using high-end HT Grades), or Temperature range: -56 to + 180 degrees Celsius (-70 to + 350 Fahrenheit), if reinforced with Polyester)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SMOLKA TOR UND ANTRIEBSTECHNIK BERLIN
Germany
With interuptor limit, clamping length 54mm and drive shaft guide 10 mm toothed cone and M8 Security for threads, 55mm center distance of axes Wiper motor without switch, with parking position Wiping angle: 90 ° Mounting arm wiper: cone M8 Engine mounting: M14x1mm Support: 57mm cone M8 Shaft length: 94mm Clamping length: 54mm max. Wiper arm / wiper blade: 650 mm
Request for a quoteDLR ELASTOMER ENGINEERING
United Kingdom
The well known under-bonnet temperature increase has been resolved mainly by using high-performance polymers with the capability of withstanding temperatures in excess of 200°C. Some of the rubber mouldings commonly encountered in a car include O-rings, seals and grommets. Rubber mouldings are required to resist oils and greases as well as dirt, water, and weathering. Many custom rubber moulding solutions are subject to dynamic loading, including engine mounts and exhaust hangers. Applications requiring the best oil and chemical resistance and good ageing in hot fuel vapours are accommodated using high-performance fluoro (FKM) and fluorosilicone (FVMQ) elastomers. The bonding of rubber to other substrates is a crucial part of being able to offer novel solutions.
Request for a quoteDELTA LINE SA
Switzerland
Delta Line has been in motion control for more than 40 years and has first-hand experience garnered from their popular brushless slotted motor line. Flexible, configurable and price-practical, these Servo Motors have been eagerly awaited by applications all over the world. While global supply chains continue to be sluggish and delayed, Delta Line has been able to maintain reduced lead times on most of its products helping clients ease their time to market. The Delta Line Servo Motor Family is available in 6 Frame sizes from 38 mm square up to 130 mm square with rated torque ranges from 0.16 Nm to 14.3 Nm. Each of the six frame sizes is available in a low voltage (optimized for 48 VDC) and medium voltage (optimized for 220 VAC) version. Brake and encoder options can be selected. Delta Line extends their famous design flexibly to their new Servo Motor Line where they can engineer custom windings, face mounts and custom keyways.
Request for a quoteSAMTRUCK
Turkey
Gaskets, Engine Mountings, Exhaust Pipes, Multiribbed Belts, Feed Pump, Fan Blades etc. We have all Trucks spare parts. Just contack us by mail or whatsapp number: export@samtruckt.com.tr Whatsapp: +90 535 830 18 19 Exports sales: Sami Caner
Request for a quoteISOTEK CNC TAKIM TEZGAHLARI OTOMOTIV (HPT)
Turkey
Our new light weight pump for demanding truck hydraulics for operating, for example, loader cranes, hooklifts, etc. Displacement range 12-108 cm3⁄rev and working pressure up to 400 bar. Direction of rotation is easy to change by turning the connection cover. We use 2 types of seals. first type fitted with extra heat-resistant seals (Viton) to withstand higher temperatures when mounted on an engine power take-off. These type of seals used in high temperatures region. The second type is normal seals which can withstand cold weather. We use the best bearings which stand high heat temperatures and high speed rotation.
Request for a quoteISOTEK CNC TAKIM TEZGAHLARI OTOMOTIV (HPT)
Turkey
Our new light weight pump for demanding truck hydraulics for operating, for example, loader cranes, hooklifts, etc. Displacement range 12-108 cm3⁄rev and working pressure up to 400 bar. Direction of rotation is easy to change by turning the connection cover. We use 2 types of seals. first type fitted with extra heat-resistant seals (Viton) to withstand higher temperatures when mounted on an engine power take-off. These type of seals used in high temperatures region. The second type is normal seals which can withstand cold weather. We use the best bearings which stand high heat temperatures and high speed rotation.
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting Right - Polo 1,4 16V 02 ramexauto.com 6Q0 199 167 CJ 6Q0 199 167 BM 6Q0 199 167 DN
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting Inner POLO 1,4 16V 6Q0 199 851 AL/ 6Q0199851AL
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting (Right) GOLF VII/LEON/A3/OCTAVIA 5Q0 199 262 BE/BD/BK
Request for a quoteRAMTAS AUTOMOTIVE
Turkey
Engine Mounting Inner GOLF BORA AKLAGR-AGU-AHF-AEH-AHW-BCA-BCB 98-06 1J0 199 851AA
Request for a quoteEU-PARTS COMPANIES GROUP
Turkey
Cylinder Head Gasket Seal , Valve Stem Intake Manifold Exhaust Manifold Gasket , Crankcase Oil Pan Gasket Oil Seal Valve Cover Gasket Timing Belt Timing Chain Timing Chain Guides Timing Chain Tensioner Camshaft Engine Mounting
Request for a quoteCARONI S.P.A.
Italy
FRONT AND REAR MOWERS SUITABLE FOR ATV/QUAD Agile, robust and safe on any kind of ground, the TC Special series of Caroni Mowers are the ideal partners of ATV/QUAD models. Designed and realized according to the most recent construction technologies and systems, both in front and rear version, they can guarantee a clean and precise cut, 25 to 100mm (1" to 4" inch) on the whole working width of 1200 or 1500 mm (48" or 59" inch). Other versions can also be realized: with a 1800 mm (71" inch) working width and rear or side unloading, or with a 2400 mm (95" inch) working width with rear unloading. Available in eight models with side or rear unloading and manual or electric start-up, they are equipped with a monobloc self-supporting cold-drawn frame that makes them especially robust. Their reduced weight makes all manoeuvres easier. Easy cutting height adjustment: simply by shifting the spacers mounted on the fork axle. The drawbar is floating to let the machine easily follow the ground unevenness. Furthermore, various positions are available in order to shift the machine as to tractor. Seven greasing points are available, easy to reach. The belt tension is obtained by adjusting the screw mounted under the motor and can be checked easily, too. Briggs & Stratton engines 11.5 HP are mounted on the standard versions of the TC SPECIAL machines for ATV/QUAD models, but other engines fromthe best manufacturers in the market are also available. Furthermore, various accessories are available in order to complete the machine equipment: from a mulching kit to inflatable wheels, to a centralized greasing kit. Mulching and Recycle System THE KIT THAT SHREDS THE GRASS AND CUTS DOWN ON TIME AND MONEY. THE EXCLUSIVE MULCHING AND RECYCLE KIT FROM CARONI MEANS THAT YOU CAN SHRED LEAVES AND GRASS WHILE YOU ARE CUTTING THE LAWN. THE KIT CAN BE FITTED ON ALL OUR MOWERS SO THAT YOU CAN SAVE TIME AND SPEND LESS ON UPKEEP. The Mulching and Recycle System comes in a wide variety of different versions to match Caroni entire range of rear, side and multiple rotary mowers. The kit contains a set of special steel shredding blades and a steel case, which are easily fixed to any of our mowers. The mower blades mow the grass finely and evenly because they keep so close to the contours of the ground. At the same time the special blades, which are mounted on the same axle, shred the newly mown grass and and/or leaves mixed together inside the case. The mulched grass is then spread over the ground. There are no problems with blocked mower wheels, because a special scraper makes sure that no lumps accumulate. One of the best things about the Mulching and Recycle System is that it cuts down on the time and money spent on picking up, moving and disposing of all those grass cuttings. Another plus is that the shredded grass and leaves make wonderful natural compost “ not too wet, not too dry - which is recycled into the biological chain without doing any damage. In addition, as all our mowers are fitted with a safety deflector, there is no risk of any gravel or other small objects being spread on the ground with the mulch.
Request for a quoteResults for
Engine mounts - Import exportNumber of results
30 ProductsCountries
Company type
Category