Emi shielding - Import export

Flexforce™ power cables are flexible composite cables designed for applications where high currents have to be carried. Their main advantages are as follows: high current carrying capacity, very good resistance to cut-through, to high temperature (150 C°). Possibility of shielding for excellent EMI protection. Resistance to fluids (hydraulic liquid, mineral oil, gasoline, diesel). Flexforce flexible power cables are made up of extra-flexible tin plated copper conductors insulated with FEP or Axon's special high temperature thermoplastic ASC15 and including separating tapes.

Axomove® is a range of round composite cables specially designed for robotic technology applications. They are able to meet the most demanding requirements of the automation technology. The main characteristics are as follows : good flexlife and resistance to torsion, small dimensions, small bend radius, resistance to oil and solvents, abrasion resistance, EMI protection. Depending on customer requirements, they can be composed of round or flat primary wires or both Insulation : FEP, PTFE, ETFE, PFA, polyimide, vitax™ , PU, ... Shielding for EMI protection when required

36 micron high tensile solderable copper foil coated with a high quality conductive acrylic adhesive system and protected by siliconized paper liner. Designed for electrostatic and EMI/RFI shielding, cable wrapping, flexible circuit boards, coils and transformers. Product Features And Applications: Good malleability, heat/cold resistance UV and ageing resistant Excellent solderability Electrical/Electronics industry Automotive and aerospace industry

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.

Product Features: • Heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body, • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • Diecast aluminium end panels are rugged - yet easy to machine. Front and rear gasket is a full perimeter conductive foam/fabric made of a Ni/Cu (nickel/copper) and CPSA (conductive pressure sensitive adhesive). • Designed to meet IP54 ratings. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Available in natural vibra finish OR in light textured, black powder paint. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance. • Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed. • M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes. • Designed to meet IP54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available. • All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket. Gasket is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Factory powder coated to save stomp box manufacturers and experimenters time and money. • Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining. • Smooth finish allows for easy adhesion of labels and/or silk screens. • Colours are matched to standard RAL colours. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Designed to meet IP54. IP65 rating available, but this also requires water-tight screws. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • High impact strength, zinc diecast alloy (tough - yet easy to machine), electronic instrument enclosure. • Zinc material also offers easy ability to plate the enclosure. • Zinc material is soft and easy to machine and offers a heavier weight alternative (over double) to the 1590 diecast aluminium enclosures. • Zinc diecast enclosures provide extra coolness to the touch and add perceived premium quality weight to your product. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Enclosure is vibra finished for a smooth surface with no sharp edges. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. • Four (or six in the1590K432) M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid - into factory tapped holes.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Four 6-32 x 1/2" machine screws secure lid - into factory tapped holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Kemtron’s EMI shielding vent panels or attenuvents are made from aluminium or steel honeycomb mounted into a frame. Many aluminium frame styles are available together with different thicknesses and configuration of honeycomb to meet different shielding requirements. Protective grills are available for vulnerable areas together with dust filtration foams. Many plated or painted finishes can be specified.

Knitted wire mesh gaskets provide an excellent cost effective EMI gasket, providing shielding in the magnetic as well as electric fields. Kemtron knit in four wire types, Monel, Stainless steel, aluminium and tin plated copper clad steel. Knitted mesh gaskets can be supplied as solid mesh or knitted over elastomeric cores with or without environmental seal in continuous lengths or fabricated to custom designs.