Results for
ZOLLER & FRÖHLICH GMBH
Germany
Technical information Measurement device for precise, quick measurement and monitoring of the crimping depth. Electronic indicator with absolute capacitive gage. One-time zero-point adjustment, which stores the zero-point until the next battery change. Easy reading due to a large display. The indicator will be delivered with a solid Z+F holding unit, which has an integrated magnet. This ensures a safe fixture on any suitable surface.
Request for a quoteBLAZE DISPLAY TECHNOLOGY CO.,LTD.
Germany
Part Number: BGB240128-02A ● Character LCD 240 x 128 (dots) ● FSTN-Gray / STN-Gray / STN-YG / STN-Blue ● Built-in controller ((RA6963 or Equivalent) ● +3.3V / +5.0V power supply ● 1/128 duty , 1/12bias ● Viewing Direction: 6H / 12H ● Interface: 8080 8-bit parallel ● Backlight (Side LED): White / Green / Blue / Yellow-Green / RGB / Orange / Amber ● Temp: N.T / W.T / Super W.T
Request for a quoteSIKO GMBH
Germany
The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set. Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.
Request for a quoteSIKO GMBH
Germany
Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.
Request for a quoteSIKO GMBH
Germany
Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual machine adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Integrated Industrial-Ethernet-Fieldbus.Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S and AP10 position indicators. IP53 type of protection, IP65 as an option
Request for a quoteSIKO GMBH
Germany
The AP05 position indicator guides the user intuitively to the correct machine setting in the case of product or format change. The optimized backlit display indicates target values and actual values straight to the point. Two LEDs show the machine operator precisely the direction whereto the adjustment is to be performed.The AP05 helps avoid wrong machine settings and enhances process safety of flexible production machines. Electronic position indicator with bus interface. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. User guidance through status LEDs. Hollow shaft with Ø 20 mm and clamping ring made of stainless steel. Enhanced shock resistance owing to protective display glass. Integrated RS485 interface, CAN bus as an option. Robust sensor technology unit thanks to magnetic scanning. Mechanically compatible with the AP04 and DA04 position indicators. IP53 type of protection, IP65 as an option.
Request for a quoteSIKO GMBH
Germany
Bus-compatible position indicator with two-row LCD display for indicating target and actual values. With additional status LED for clear indication of the positioning status. Serves for monitored format adjustment aiming at reducing setup times and increasing machine efficiency. Electronic position indicator with plug connection for magnetic sensor. Optimally readable backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus as an option. Display accuracy up to 0.01 mm. Absolute function via internal backup. User guidance via bicolor status LEDs. IP53 type of protection, IP65 as an option.
Request for a quoteSIKO GMBH
Germany
Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading poisition. Freely programmable directly via buttons on the device. Hollow shaft, max. Ø 30 mm. Stainless-steel hollow shaft. LCD display with 6 digits and special characters. Digit height approx. 11 mm. Long battery life. Easily replaceable batteries (standard AAA). Incremental measurement function, absolute value display. High degree of protection.
Request for a quoteSIKO GMBH
Germany
Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 30 mm. LCD display with 5 digits and special characters. Digit height approx. 12 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.
Request for a quoteSIKO GMBH
Germany
Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 14 mm. LCD display with 5 digits and special characters. Digit height approx. 8 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.
Request for a quoteSIKO GMBH
Germany
With bus interface, for direct linear length measurement Profile AP04S: Electronic position indicator with plug connection for magnetic sensor Requires magnetic sensor MS500H and magnetic tape MB500/1 Easily readable, two-line LCD for target and actual values integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup User guidance via bicolor LED
Request for a quoteSIKO GMBH
Germany
With bus interface Profile AP04: Electronic position indicator with bus interface Compact design Hollow shaft, max. Ø 20 mm Easily readable, two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance via bicolor LED
Request for a quoteSIKO GMBH
Germany
Profile AP10S: Electronic position indicator with plug connection for magnetic sensor optimally readable backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Display accuracy up to 0.01 mm Absolute function via internal backup user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option
Request for a quoteSIKO GMBH
Germany
With bus interface Profile AP10: Electronic position indicator with bus interface Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option Backlit display Two-line LCD for target and actual values Reset, incremental measurement, offset via keyboard integrated RS485 interface, CAN bus as an option Robust sensor technology unit thanks to magnetic scanning User guidance through status LEDs Mechanically compatible with the DA09S position indicator IP53 type of protection, IP65 as an option
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
For connection of up to three DK probes with adapter cable CE29 or linear encoder. Equipped with RS-232C function as standard Peak value function, hold function Various input functions especially for automatic measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function
Request for a quoteSIKO GMBH
Germany
freely programmable Profile DE10P: Freely programmable directly via buttons on the device Hollow shaft, max. Ø 30 mm Stainless-steel hollow shaft LCD display with 6 digits and special characters Digit height approx. 11 mm Long battery life Easily replaceable batteries (standard AAA) Incremental measurement function, absolute value display high degree of protection
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SIKO GMBH
Germany
Freely programmable Profile DE04: Freely programmable electronic digital display for length or angular measurement Freely programmable via the ProToolDE programming software Hollow shaft, max. Ø 14 mm LCD display with 5 digits and special characters Digit height approx. 8 mm Reset, incremental measurement, offset via keyboard Long battery life Easy battery change without dismantling of the device
Request for a quoteSIKO GMBH
Germany
Profile AP24: For tool change and target value specification Remote display without actual value measurement Acknowledgement button integrated bus interface (RS485) Two-line LCD-Display User guidance via bicolor LED M8 plug connection
Request for a quoteSIKO GMBH
Germany
with bus interface, for format part or tool change Profile AP10T: setpoint display with bus interface without measurement of actual value large control key to confirm target value optimally readable backlit display Two-line LCD-Display integrated RS485 interface, CAN bus as an option user guidance via bicolor status LEDs IP53 type of protection, IP65 as an option
Request for a quoteNORELEM FRANCE
France
Body and rotary table Al alloy, anodised. Spindle steel, casehardened. Spindle bearing maintenancefree. Position indicator plastic. Version Radial play of rotation axis < 0.015 mm. Axial play of rotation axis < 0.02 mm. Repeat accuracy < 0.05°. Spindle selflocking. Note 360° adjustment with no end stop. The position indicator displays in 0.1° increments clockwise. The angle of rotation is indicated directly on the large LCD display. The rotary stage rotates anticlockwise. Reset, chain dimension and offset settings can be made via the keypad. 2 years battery life. The battery is quick and easy to replace. The mounting position of the position indicator is set in 4 positions using one screw. Transmission ratio 211611008 = 501 211611012 = 551 211611025 = 501 The modular design enables the rotary stage to be easily combined with other items of the same size. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".
Request for a quoteSIKO GMBH
Germany
Reach for the stars! The innovative adjusting knob DKE01 combines a programmable electronic position indicator with a star grip or disk handwheel to offer a flexibly usable positioning unit. The indicated values can be configured application-specifically to cover the most varied areas of use with always the same basic device. Turning knob with integrated 5-digit LCD display. Digit height approx. 11,5 mm. Freely programmable via the ProToolDE programming software. Usable for length or angle measurement. Shaft accommodation: max. Ø 20 mm. Long battery life. With disk handwheel as an option.
Request for a quoteNORELEM FRANCE
France
Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°
Request for a quoteTAPPI STAMPATI S.R.L.
Italy
Combined fixing plates in steel or galvanised steel, to be welded or directly screwed on tanks of industrial machines or generating sets. The use of this fixing plates make easier and very faster the assembling operations of our fixed mechanical level gauge in combination with our bayonet tank cap passage diameter 40 mm. Combined fixing of tank cap and fixed level indicator allows to easily monitor the liquid level in the tank during the refueling. We also supply versions of single fixing plates and fixing plates for electronic level indicators or to connect flexible fuel filling hoses of various diameters. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases.
Request for a quoteTUNA WEIGHING AND ELECTRONIC SYSTEM
Turkey
Specifications OIML R76: 2006 Type Approval Certified Wide-angle 51mm high LCD screen (with backlight) Easy to install design High speed 24 bit Delta Sigma-Analog Digital converter Programmable two-stage Capacity Kg / Lb unit conversion Counting pieces Checkweighing HI-OK-LO Live animal weighing Rechargeable internal battery Battery status indicator Connecting 8 pieces 350Ohm load cell RS232 Communication RS485 Communication (Option) Real-Time Clock (Option) TECHNİCAL SPECİFİCATİONS CLASS III OIML R-76 approval reset Tare Negative measurement Auto-scan Reset at boot Manual reset Animal weighing mode Multi-range weighing Metric / Imperial conversion Battery level indication, the low battery warning 3 point orange RS-232 (RS 485 optional) Optional relay control output (i5indicators do not support this feature) optional Date / Output with Clock Ability Simple counterbalance Internal battery (i5 indicators are without battery)
Request for a quoteTEST GMBH
Germany
The TesT electronic indicators of type 816 contain a process controlled electronic unit with most modern software. They can be combined with all TesT force sensors. The standard version of this device includes the usual functions in quality assurance: Peak value memory for tensile and compressive forces, selectable units: N, kg or lbs, On / Off switch. A list of options can be found below in the technical data. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight.
Request for a quotePERKUTE MASCHINENBAU GMBH
Germany
The extensive power spectrum of this solid production series in combination with the standard equipment coordinated optimally sets new standards in cleaning technology. The solid interpretation of the machine components connected with the modern design of the easy-care machine case completes the innovative machine concept. By the choice of specific accessory articles many possible applications open up. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Modern design Powerful washing pump High permissible basket load Low water pressure switch as dry-run protection Tank cover in the return flow, filterbasket incl. Programmable operation operating counter incl. Housing insulation Loading carriage incl. Grate bearing Digital temperature indication Electronic basket drive (PF 100; PF 150) Square blast pipe system (PF 200) Rotation blast pipe system (PF 300) Adjustable feed
Request for a quoteHERMA GMBH
Germany
Uncompromisingly fast and reliably effective Primarily designed for round pharmaceutical products, such as glass vials and the corresponding high batch sizes in the healthcare industry Wrap-around labeler 132M HC for healthcare products with a high-speed output of up to 400 products per minute High labeling speed with extreme precision thanks to the new HERMA 500, our high-performance applicator It is completely equipped for all healthcare tasks, including a selection of various printing and control systems, an patented automatic label return with cross check, as well as one of several possible product reject stations New innovative HERMA rotary tables, electronic position indicators and format sets that can be exchanged without tools for fast format changes ensure maximum overall equipment effectiveness The 132M HC can be easily configured for numerous industry applications - even without printers and control systems in the version 132M
Request for a quoteResults for
Electronic indicators - Import exportNumber of results
31 ProductsCountries
Company type