Electrical safety - Import export

Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Auto Bleeder The SITEMA Auto Bleeder has been specially designed for the use with a SITEMA clamping head. It makes sure that the hydraulic system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Valve Actuator MVA Secure the rupture of a chain with the full comfort of a pneumatic SITEMA clamping head When a load has to be secured against rupture of a suspension device (e.g. a chain), many customers use our Mechanical Safety Catcher KRM. This unit has the advantage to hold the load immediately upon rupture of the suspension device. Additional sensors to detect rupture of a chain are not necessary. On the other hand, it is not possible to activate the KRM in a user-defined position without rupture of the suspension device, e.g. for maintenance purposes. Here, the Mechanical Valve Actuator MVA comes to your rescue. It is simply put between the suspension device and the...

Mechanical Valve Actuator MVA Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electropneumatic module EPM The Electropneumatic Module EPM acts as interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

The structures made by people are necessarily made very painstakingly and controlled. Every day there are different designs and new productions that will work. The topic of electricity is also important in all aspects of life. As much as electricity is needed, it can also create a dangerous situation. Therefore, wherever there is electricity, safety control should also be provided. Electrical panels are also products used in this regard. For the safety of employees, it is very important. It also prevents the loss of power outage. Boards can be used for various purposes in various fields.

The awardwinning EMAN is a highquality helmet with a modern design that protects against arc flash of up to 7kA (EMAN 7000). For extra protection against impacts, the EMAN range also features ENHA’s patented Crashbox. EMAN is also equipped with a fully retractable visor that protects the entire face.

The awardwinning EMAN is a highquality helmet with a modern design that protects against arc flash of up to 7kA (EMAN 7000). For extra protection against impacts, the EMAN range also features ENHA’s patented Crashbox. EMAN is also equipped with a fully retractable visor that protects the entire face.

The awardwinning EMAN is a highquality helmet with a modern design that protects against arc flash of up to 7kA (EMAN 7000). For extra protection against impacts, the EMAN range also features ENHA’s patented Crashbox. EMAN is also equipped with a fully retractable visor that protects the entire face.

The awardwinning EMAN is a highquality helmet with a modern design that protects against arc flash of up to 7kA (EMAN 7000). For extra protection against impacts, the EMAN range also features ENHA’s patented Crashbox. EMAN is also equipped with a fully retractable visor that protects the entire face.

Immersion heater for laboratory and electroplating technology Advantages: Maximum energy utilization through infrared radiation - the cladding tube is infrared permeable; through heat conduction - the cladding tube made of quartz glass enables particularly good heat transfer. Temperature resistance Since quartz glass has practically no thermal expansion, such immersion heaters are particularly resistant to heat changes. Acid resistance Quartz glass immersion heaters are almost resistant to acids except phosphoric acid above 300 ° C and hydrofluoric acid. They are therefore particularly suitable for the direct heating of chemicals in the laboratory and electroplating technology. electric security The cladding tube made of quartz glass is an excellent electrical insulator - safe contact protection; optimal electrical safety through earthing of the interior. In compliance with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Easy deep cleaning Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Full access to mixing chamber through the extractable rotor shaft • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating.

Main features • Mixing times adaptable to the specific process • Extremely high mixing quality • Constant quality of the product output • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Hourly productivity: from 500 to 1.200.000 liters/h • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Vertical discharge door with adjustable internal diaphgrams to regulate the production capacity • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Our RO system offers a versatile production capacity from 250 to 4,000 liters per hour. It features a stainless steel high-pressure pump and a user-friendly 7" touch screen PLC interface. To ensure precision and efficiency, a digital flow meter measures production and wastewater quantities, and flow rates can be adjusted with a stainless needle valve. Pressure sensors on the touch screen monitor network and membrane input pressure, automatically stopping the system and displaying errors if preset pressure values are exceeded. Users can monitor the Total Dissolved Solids (TDS) value on the touch screen. The system includes three high-quality solenoid valves controlled by the PLC microprocessor for precise management. The electric panel ensures safety and longevity with Motor Protection and phase Protection functions. The system is housed in a visually appealing stainless cabinet.

Compact table-top Electronic Pressure Sensitive Tape Dispenser that delivers accuracy with the touch of a button. The dispenser can utilize various pressure sensitive tapes, including masking tape, Scotch® tape and strapping tape, making it ideal for sub-assembly areas and small package sealing. The PS2A will maintain the integrity and superior quality standards that have made Better Packages, Inc. a leader in the manufacturing and packaging industry. Special Features and Functions: - Automatically dispenses and cuts tape to the exact pre-set length. - Special adjustable core allows for 1" to 3" tape core sizes. - Color-coded, smooth touch keypad for ease of use. - Heavy-duty, 5-foot long electrical cord. - Grounded for enhanced safety.

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Hydraulic Submersible Water Pumps with grill Hydraulic Submersible Water Pumps with Open Suction Hydraulic Mounted Submersible Water Pumps Brochure Submersible Water Pumps 7 MOTIVES TO CHOOSE HYDRAULIC PUMPS FOR THE POWER PERFORMANCES The hydraulic pumps have an unbeatable power / weight/ dimension ratio, example an hydraulic motor with power of 15 k W have a weight of only 4 k g and the dimension of a beer cr ate , which other type of motor either electric, gasoline, pneumatic or other can give such concentrated power. This gives to the hydraulic pumps compactness, lightness, easy handling and unmatched performances. In case of emergencies and calamities (like floods) where are necessary efficiency, high power, speed, capacity of operate in all situations then no other pumping system is better then hydraulic pumps, guarantee !!! FOR THE SAFETY Absence of electricity is an implicit assurance of safety as it is impossible to cause electric shocks, a man can work in all...

Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes

We provide comprehensive solutions in the field of electrical installations. From domestic installations to commercial and industrial installations, our electrical experts are prepared for every type of project. We provide reliable and efficient electrical installations that ensure optimal functioning of electrical systems in any environment. Safety, reliability and efficiency are our main goals for your projects.

Design: Ergonomic, service and drip tray are integrated with the machine body. Control System: Smart Plus control panel (programming each day separately - electricity / on / off / temperature control / wate level control / maintenance period determination / working mode / real time clock / day no. Temperature Control : Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can get water from the network or from the bottle with a pump). Resistance Power: 3 KW (RiCA) Water Reservoir Drain System : Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot water outlet tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm Foot Water Capacity: 30 liters Maintenance Schedule Determination: Yes Clock, Real Time: Yes

eatures Design: Ergonomic, service and drip tray are integrated with the machine body. 9 liter inner teapot is added. Control System: Smart Control Panel (Easy to use, ability to program each day separately) Temperature Control: Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can draw water from the bottled bottle with a pump from the network). Electrical Resistance Capacity: 3 KW (RiCA) Water Reservoir Drain System: Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot Water Outlet Tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm Foot Water Capacity: 30 liters Teapot Capacity: 3 teapots and 9 lt capacity inner teapot Dimensions W x D x H: 116 x 56 x 51 cm

Design: Ergonomic, service and drip tray are integrated with the machine body. Control System: Smart Plus control panel (programming each day separately - electricity / on / off / temperature control / wate level control / maintenance period determination / working mode / real time clock / day no. Temperature Control : Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can get water from the network or from the bottle with a pump). Resistance Power: 2+2 KW (RiCA) Natural gas capacity: 5.4 KW/h Water Reservoir Drain System : Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot water outlet tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm foot Water Capacity: 30+30 lt double water tank Ignition System: Battery operated lighter

Design: Ergonomic, service and drip tray are integrated with the machine body. Control System: Smart Plus control panel (programming each day separately - electricity / on / off / temperature control / wate level control / maintenance period determination / working mode / real time clock / day no. Temperature Control : Digital temperature sensor Temperature Display: Digital display Water System: SWS (Smart water system - can get water from the network or from the bottle with a pump). Resistance Power: 2+2 KW (RiCA) Natural gas capacity: 5.4 KW/h Water Reservoir Drain System : Yes Water Tank Structure: Weldless plastered stainless tank Water Tank Material: Stainless 304 L DDQ 1, 2 mm Electrical Safety: 25 mA leakage current relay Component Safety: 25 A Contactor Thermal Insulation: Ceramic fiber blanket Hot water outlet tap: Yes On-Off Switch: Yes Drainer Discharge System: Yes Foot: 4cm foot Water Capacity: 30+30 lt double water tank Ignition System: Battery operated lighter

The irradiation chamber BS-02CT is a chamber to test samples according IEC 60335-1: “Household and similar electrical appliances – Safety – Part 1: General requirements - Edition 5.2” This test is designed for non-metallic materials that are exposed to direct or reflected UVC radiation from 200 nm to 280 nm. The test can be used to test radiation stability against UVC radiation that can cause aging like discolorations, changes in material properties, crack formation and smell. Therefore the UVC low pressure mercury lamps emit a continuous spectral irradiance of 10 W/m² at 254 nm. IR heater heat up the samples so that a black-panel temperature of 63 °C ± 3 °C can be reached and controlled. The time can be set to an exposure duration of 1000 h. The irradiation chamber BS-02CT can also be used to test material properties that are disinfected by UV-C. Typically the UVC dose of a daily disinfection for a period of two years can be accelerated to 12 hours.

Advanced inverter technology for superior TIG DC performance. Industrial TIG welder for difficult conditions. The fully functional and user-friendly control panel, with graphical and numeric display, makes it easy to set all welding parameters. Robust construction: electrical safety (IP23S), protected printed circuit boards and optimal airflow reduce contamination to extend equipment life in the harshest environmental conditions. TIG HF and Lift ignition meets all requirements. Perfect start of the TIG HF with pre-defined start mode. Complete configuration of TIG parameters: Pulse TIG with variable frequency that allows the welder to adjust the arc focus according to applications, 10 memory positions for personalized welding settings, TIG spot welding. Water coolers and carts available What's included: Input cable (2m) Gas connection kit

Drive Double Drive Battery 12V/7AH (10AH optional) Max Range 1H Charging time 8-10H Max. load 50kg Feature [4WD with shock absorption] + [multifunctional remote controller (which can control speed regulation, slow start and stop, acceleration and deceleration, music switching, swing movement, music, light, power supply, whistle, brake system, etc.)] + [one key start] + [power display] + [electric tipper handle control with safety lock] + [simulated headlights] + [early education function] + [English story] + [LED headlights]+ [USB socket] + [MP3 socket] + [color: white, red, blue, yellow, baking red, baking black] + [swing] + [double door] Packing Size 132*67*47 CM Product Size 121*71*71 CM Net Weight 23Kg Rought Weight 27Kg Remote Control Yes

Electric heaters for any type of premises RP PROFESSIONAL electric heaters or heaters are robust and with the best components to obtain a fast, efficient and durable electric heating system. All models include, as standard, an ambient thermostat to start and stop the equipment once the desired temperature has been reached in the room and in this way optimize energy consumption. The 30 kW model can be applied to an external room thermostat with 10m of cable in case you want to control the room temperature at a point away from the equipment. Constructive details - Armored electrical resistance AISI 321 of high thermal exchange - Built-in room thermostat - Power selector - 1.5m electrical connection cable - Manual reset safety thermostat - Front protection grid - Channel up to 6m (except RP 33 M model) - Possibility of stacking several teams

CW-100G Pro, an automatic checkweigher is made of premium stainless steel complying with the newest electrical safety regulations, which meets the demands for safety, high accuracy, and high speed. It is easy to use, and simple to maintain in the food and pharmaceutical industry. Weighing range:1-500g Highest Speed: 300+pcs/min Highest Accuracy: ±0.1g

CW-100G, an automatic checkweigher is made of premium stainless steel complying with the newest electrical safety regulations, which meets the highest demands for safety, easy usage and simple maintenance in the pharmaceutical industry. The belt system can be changed easily and quickly.