Electrical insulation tape - Import export

Electrical tapes are used to insulate electrical wires and other materials that conduct electricity. The tape can be used in white goods applications. It is used for coil, capacitor and cable installations. The tape is resistant to UV light, inhibits corrosion of electrical conductors.

APPLICATIONS For the reconstitution of insulation for low voltage joints. For permanent waterproofing of low and medium voltage taped joints. For preventing leaks of resin during injection in low and medium voltage taped joints. PRODUCT BENEFITS Interleaving overlaps the edges of the coil, allowing easy separation from the tape. Service temperature ‐30 to +80°C. Particularly suitable for hot climates. Good compatibility with all resins used to protect joints. Resistant to water and ozone. Good physical properties, which show a high degree of stability under conditions of use.

Adhesive tape for electrical and electronic equipment. Insulating tape for motors, transformers and capacitors. UL Listed

High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C

Rubber plasterboard profile sound insulation tape is used in sound insulation applications. It prevents vibration by using it at the junction of the carcass and plasterboard. Rubber Sound Insulation Tape is assumed to be for joining joints between sections of flexible pipe insulation; However, this is definitely not the recommended use for this product.

It is manufactured from DuPont Nomex coated with an aggressive solvent resistant acrylic pressure sensitive adhesive. Designed for high temperature electrical applications where a thin, strong and puncture resistant backing is required. Thin, strong and puncture resistant backing Chemical resistance Nomex high temperature film Phase insulation of electrical motors, generators, etc. Outer wrapping, tabbing and anchoring leads of electrical transformers, coils, etc.

It is a 50 micron Teonex® film coated on one side with high-temperature silicone adhesive. Designed for high temperature electrical applications where a thin, strong backing combined with excellent dielectrical properties is required. Features • High temperature resistance • Good adhesion on difficult substrates • Good chemical and solvent resistance Applications • Insulation of bobbins, pencil coils, transformers, motors, capacitors, etc. • Cable and copper wire manufacturers

BASED ON A POLYIMIDE FILM, WHICH EXHIBITS OUTSTANDING TEMPERATURE RESISTANCE AS WELL AS EXCELLENT MECHANICAL AND ELECTRICAL PROPERTIES. RADIATION RESISTANT. SHORT TERM HEAT RESISTANCE UP TO 400C. APPLICATIONS : INSULATION TAPE FOR VERY HIGH TEMPERATURES. FOR HIGH STRESS CONDITIONS IN TRACTION MACHINE MANUFACTURING. GENERATOR PRODUCTION. OUTER WRAP FOR TRANSFORMERS, TORROIDAL COILS, MOTOR COILS AND BUNDLING OF ARMATURE COILS.

Semi‐conducting, self‐amalgamating EPR (Ethylene Propylene Rubber) tape. Its colour is black. The product and interleave are printed with the cautionary words semi‐conducting to distinguish the product from insulating tapes. APPLICATIONS For ensuring the continuity of conductor and core screens at cable joints in a variety of polymeric and elastomeric insulated cables. For jointing power cables up to 69kV. For stress cone construction, where it provides the conducting layer. For smoothing electrical stresses on irregular shaped lugs and connectors. For smoothing electrical stresses in joints and terminations using premoulded components. For smoothing electrical stresses on overhead power lines, reducing discharges and consequent interference to local radio and telephone communications.

It provides excellent bulk and stiffness in an easy to tear product. Polyester Non-Woven laminates are puncture resistant and highly conformable making these tapes ideal for wrapping around sharp corners and edges. Applications • Ground and barrier insulation for electrical motors, generators, etc. • Outer wrapping, tabbing, harnessing and anchoring leads for electrical transformers, coils, etc

It is a 0.13mm premium quality, electrical self‐extinguishing soft PVC tape that uses an aggressive pressure sensitive rubber‐based adhesive system. It has been designed for use where a recognised specification or international standard is required and where environmental safety is a concern. Self-extinguishing soft PVC tape APPLICATIONS Hand application Primary electrical insulation Harnessing Protection for low and medium voltage cable splices Colour coding PRODUCT BENEFITS Good resistance to abrasion, corrosion and moisture High dielectric strength and good mechanical protection Outstanding conformability Tape can be applied at low temperature (till ‐10°C) IMQ and VDE Approval Certificates according to IEC 60454‐3‐1 Conforms to the European Directive 2011/65/EC (RoHS 2) and Commission Delegated Directive (EU) 2015/863 (RoHS 3) Index temperature 0°C to 90°C UL 510A ‐ Recognized Tape

Aluminized adhesive carbon felt is made of 100% pre-oxidised polyacrylonitrile fibre in a black colour. It is fully fireproof and an excellent fire retardant; it does not drip and has very low fume emissions; it can also be used as a fire blanket because it is fire-resistant up to temperatures with peaks around 800°C. It has good chemical resistance, in particular to alkalis, diluted acids and solvents, and a good ability to reflect heat and increase the luminosity of work places.

Glass cloth backing coated on one side with a non-corrosive, high-temperature, flame retardant, thermosetting silicone pressure-sensitive adhesive. Temp resistance:200C

Glass cloth backing coated on one side with a non-corrosive, high-temperature, flame retardant, thermosetting silicone pressure-sensitive adhesive. Temp resistance:200C

Polyurethane foam self-adhesive tape for insultating and protecting pipes.

DURAVOLTA is a new developed flame retardant and heat stabilized Polypropylene, made in Germany. The main reason for developing this material was to offer a halogenfree material according to IEC 61249-2-21 with outstanding heat and electrical insulation properties. It unites very good technical values, high form stability and ecologically aspects with a very good price-performance-ratio. Advantages: •halogenfree according to IEC 61249-2-21 •outstanding RTI el von 120°C according UL 746B •very good electrical insulation properties by high resistivities and dielectric strength •non hygroscopic •very high chemical resistance •very good processing properties •RoHS and WEEE compliant •producable in thicknesses according your needs •recycable •made in germany Application: •computers and computer peripherals •electrical and power distribution systems •telecommunications equipment •conventional and uninterruptible power supplies •medical equipment and lighting •consumer products

Politubes produces various types of insulating Mylar, Nomex, Kapton, 2LSO, DMD tubes & insulator caps designed according to the requirements of hermetic closure, positioning, size and protection from chemical agents as required by our customers. They can be supplied in perfectly round or oval form to facilitate insertion and to reduce the overall dimensions. Their dielectric strength can reach 303kV/mm with reference to the ASTM-D-149-91 test method and are used within a temperature range of -50°C/+300°C. Our adhesives, carefully selected during our forty years of experience, comply with all REACH and RoHS regulations and guarantee that the original properties of the films used are fully maintained. They are used for insulation and thermal management in stator slot E-Motors, thermal protectors insulation inside electric motors, motor lead termination, compressors, in order to avoid wires ends to damage the surrounding parts