Electrical enclosure - Import export

Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail mounted components. • The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use. • Lid and mounting holes are located outside of the gasket seal. • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly and disassembly). • Heavy duty 16 gauge galvanized steel panels available. • All stainless steel hardware to avoid corrosion caused by dissimilar metals. • Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is replaceable. • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Internal DIN rail mounting tabs.

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Versions without mounting flanges are available in unfinished aluminium or smooth ASA 61 grey powder coat (Hammond colour GY2). • Versions with wall-mounting flanges are available in unfinished aluminium or smooth black powder coat (Hammond colour BK2). • Unpainted aluminium version is protected through manufacturing and shipping with a plastic film cover to ensure a high quality finish. Also doubles as a removable drilling template. • Steel finished in ASA 61 grey baked powder paint (inside and out to prevent rust).

Product Features: • Sizes A to E are 20 gauge 0.036" thick steel. • Sizes F to J are 18 gauge 0.048" thick steel. • Self-tapping screws included. • ASA 61 grey baked powder paint.

Product Features: • Aluminium cases 0.081" (2mm) thick aluminium. • Aluminium top panel sizes to 14" wide are 0.064" thick aluminium. Larger sizes are 0.081" thick. • Sold pre-assembled with a textured blue case and a choice of a contemporary grey (beige) or a black top panel. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Solid oiled walnut sides on a black, ventilated steel base. • Solid wood sides are real walnut - each piece has a unique colour and grain. • Aluminium top panel is powder painted in a satin contemporary grey (beige). • Aluminium top panel sizes are 0.064" thick aluminium. • Comes with self adhesive rubber feet and required mounting hardware.

Product Features: • Convection ventilation is provided by slots in the bottom and removable rear panels. • Aluminium case is finished in satin blue with a contemporary grey panel. • Vented back panel, bottom, and sides are made from 0.081" thick aluminium • Sloped front panel is made from 0.064" aluminium • Supplied with hardware and rubber feet.

Product Features: • 18 gauge steel base for extra strength. • Easy to machine - aluminium top panels are 0.064" thick aluminium. • Sides include vertical rows of ventilation. • Sold pre-assembled with a two tone grey powder paint finish (base is dark satin grey, slope top is smooth light grey). • Comes with four self-adhesive rubber feet and required hardware.

Product Features: • Heavy duty, 18 gauge steel - top and bottom case in satin black or gulf blue powder coat. • Available with either sold or vented tops and bottoms. • Easy to machine 0.064" thick aluminium front and rear panels (one satin black and one contemporary grey for each enclosure). • Symmetrical design so either end panel can be used as a front or rear panel. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • All steel, heavy duty construction designed to house heavy, heat producing items such as power supplies. • Bottom of unit is 16 gauge steel, top is 18 gauge steel. • Finished in a rugged beige powder coat. • Top half is of an upside down "U" shape design for easy removal, bottom half is also "U" shaped but includes a fold on all sides including front and back for extra strength and mounting of top case. • Top case section is heavily ventilated for excellent air circulation with an attractive slant (also doubles as a lifting area - both front and back). • Top lip extends 0.75" (19mm) on both sides adding 1.5" (38mm) to the total depth. • Bottom is solid except for 4 holes for mounting heavy duty rubber feet. • Includes nickel plated self-tapping screws and screw on 0.75" (19mm) high, rubber feet (1421T7).

Product Features: • Top and bottom made in 20 gauge steel (for strength) and finished in beige or satin gulf blue powder coat. • Easy to machine 0.064" thick aluminium panels front and rear. • Rear panel and bottom of enclosure is vented. • Front panel is satin black, rear panel matches case colour. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Top and bottom made from 12 gauge aluminium finished in beige. • Top and bottom are attached to an internal aluminium extrusion which contains mounting slots for printed circuit boards or panels. • Front and rear panels are natural aluminium (paper coated one side) which are attached with screws to the aluminium mounting extrusion. • Panels can be easily removed for access to components. • Tops and bottoms are available in solid or with vent slots. • All hardware and self-adhesive rubber feet are included. • Replacement hardware packages include front panel screws, side screws, extrusions, and rubber feet.

Product Features: • Heavy duty, 18 gauge steel top and bottom halves finished in beige powder coat. • Easy to machine 0.064" thick aluminium panels, front finished in textured black and vented back finished in beige. • Rear panel is vented at top and bottom. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Ideally suited for mounting printed circuit boards or DIN rail mounted components. • ABS versions are moulded from general purpose material which carries a flammability rating of UL94-HB. For indoor use. • Polycarbonate versions are UV stabilized for outdoor use. Grey polycarbonate carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating. • Polycarbonate versions are cUL and UL 5008A listed (File #E65324). ABS plastic versions are not UL listed. • Enclosure colour is a light grey (RAL 7035). • Gasketed lid with two piece "tongue and groove" construction provides protection against access of oil, dust and water. • Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed). • Polycarbonate versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only).

Product Features: • The Sink Box series is a British designed extruded aluminium enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards or chassis horizontally. • The enclosure body is formed from a single hollow aluminium extrusion. This gives the unit high strength as well as simplifying assembly. • The aluminium extrusion has fins on one side (the top) which act as a heat sink. Aluminium end panels are attached to each end. • Extrusions are anodised in a choice of either black or clear. • The interior of the enclosure contains: • Numerous slots on both of the shorter sides to accept a P.C. board or chassis • Three "T" slots (one in the top and two in the bottom) which provide an alternative method of mounting chassis or components that need to be cooled by conduction • The single "T" slot in the top takes an M3 half-nut • The two "T" slots in the bottom take M4 half-nuts

Product Features: • Heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body, • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • Diecast aluminium end panels are rugged - yet easy to machine. Front and rear gasket is a full perimeter conductive foam/fabric made of a Ni/Cu (nickel/copper) and CPSA (conductive pressure sensitive adhesive). • Designed to meet IP54 ratings. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded body includes a slide removable "belly" plate - except in smaller sizes "A" through "D".

Product Features: • Designed to house P.C. boards or for equipment interfacing. • Integrated slotted flanges allow for easy wall mounting. • Flange provides a completely flat bottom surface and transitions seamlessly into the extrusion body for a finished look. • Sized for 50mm wide PC boards. • P.C. boards mount into extrusions by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from extruded aluminium with a minimum thickness of 0.06" (1.5mm).

Product Features: • Designed to house P.C. boards or equipment. • Easy wall mounting or shelf mounting with two removable flanges. • Sized for standard Eurocard P.C. boards. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Two piece body - with easily removable belly plate for easy access to top interior of enclosure. • Extruded body and aluminium endplates with a choice of either clear or black anodised finish. • Includes eight (8) assembly screws - either clear or black assembly screws to match enclosure panels and body. Note: Recommended screw torque i 5 lbf.in (56.5 cN.m).

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.