Electrical conductors - Import export

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper or aluminum, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc.

Electrical tapes are used to insulate electrical wires and other materials that conduct electricity. The tape can be used in white goods applications. It is used for coil, capacitor and cable installations. The tape is resistant to UV light, inhibits corrosion of electrical conductors.

NSPV solar cable is used in photovoltaic power generation and solar system which interconnects solar panels and electrical components. The cables applicable for humid environment, medium-sized machinery and equipments, refrigerators, washing machines, dryers and similar household appliances.

Electrically conductive wheels and antistatic wheels and castors are used in almost every industrial setting, from medical engineering, electrical and semi-conductor industries to the automotive industry, hospitals, pharmaceuticals and other chemical industrial sectors. These wheels and castors are used everywhere protection against electrostatic discharge is required. Operators and sensitive goods are particularly susceptible to the electrostatic discharge that can be generated by transport units or by transported goods.

Titanium is a silvery-white light metal that is often found, but is difficult to extract. In its pure form titanium is easy to form, malleable, thermally relatively stable and very good electrical conductor. Important characteristics are its mechanical strength and low thermal expansion. Titanium is relatively resistant to air at room temperature and its corrosion resistance is comparable to that of precious metals. High-purity titanium is used as a getter metal to remove the last gas residues in vacuum technology, as it reacts with small amounts of oxygen. Corrosion-resistant, pure titanium is used in the construction of chemical plants. Due to their high strength, low weight and excellent corrosion resistance, titanium alloys are excellent construction materials for shipbuilding and the aerospace industry. Titanium is also an important alloying element in special steels.

NSPV Rigid Electrical Conduit with Belled Ends MD grey and HD orange types Features: UV resistant; Australian Standard; PVC Conduit protects and allows runs of cables and conductors; For routing electrical wiring aboveground or underground.

Material: E-Cu58 Properties: good electrical and thermal conductivity We produce our STAX copper fibers Cu99 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and fine 60 μm. STAX copper fibers Cu99 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX copper fibers Cu99 are found in friction material as brake pads or clutches, further in plastic compounds, for shielding, in sport floors, on thatched roofs against growth of moss, as electrical and thermal conductor in different versions. If you are looking for copper fibers for your specific application, please do not hesitate to contact us.

Terminal board, terminal block, terminal rail: no matter what you call it, we deliver what you need for an interface to your current-transmission solution. Terminal boards serve to connect cables and conductors in electric motors and electrical systems. Housed in separate terminal enclosures, they form the interface for the cabling to the outside world. Depending on the field of application, terminal boards from MACK are produced from different moulding compounds. Round or oblong hole, different measurements, fixing-hole spacings and pin sizes – you will undoubtedly find the right terminal board and terminal accessories amongst our assortment.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors through the brushes in the trolleys, which travel with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors via the brushes in the trolleys, which travel with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

Technical information The Z+F EVOPRESS is an electrically driven crimping press for processing a wide variety of electrical connectors such as Z+F ferrules and Z+F terminals. With its compact design it fits into the Z+F EVOLINE. Crimping Machines, such as the Z+F EVOPRESS, are electrically powered tools specialized in the precise processing of various electrical connections. These machines are particularly utilized in handling electrical components like Z+F ferrules and Z+F cable lugs. Their primary function involves establishing a secure and durable connection between electrical conductors and their corresponding terminals through the application of pressure. The Z+F EVOPRESS and similar crimping machines not only deliver high performance but also provide the capability to process various types of electrical connectors with precision and efficiency. Key Features of the Z+F EVOPRESS: Enhanced hand safety with a protective glass at the front of the machine

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc. They are produced OF upward cansting than Contunious processing and drawing.

Busbars are typically used in high current, low voltage distribution and control equipment. Typical busbar applications include busway systems, low and medium voltage switchgear, transformers, earthing, electrification - lines panel boards, switchboards, and feeds to heavy electrical uses in commercial and industrial buildings - such as plating cells and feeder systems. Busbars can be made from copper or aluminum, but we couldn’ t argue the reality that copper bus bars are the better electrical conductors. Also installers can use smaller busbars if they are made by copper. On the other hand copper busbars have better resistance to corrosion than the aluminum busbars.We have large production facilities for extruded and drawn flats in various production range of sizes and shapes for electrical engineering, anodes, components etc.

In the cable industry films are used particularly suitable for shielding electrical conductor, as a separating and insulating films or moisturizing protection. Thus, polyester films, because of their physical and chemical properties both in data and communication cables as well as power cables used. The high tensile strength, low weight per unit area, a high degree of flexibility and good electrical properties are important criteria for the selection of the film set in the cable production.The permanently constant physical and chemical values of the polyester films, as well as the tight tolerances in the film thicknesses allow the use of POLIFIBRA products even in very demanding end-products in data and power cable area. The polyester film is a transparent, flexible film with excellent mechanical properties. The electrical properties of polyester films are very good, so they come in the field of data and communication cable with a thickness of usually 12µ - 50µ for use.

Several bunched single wires or bundles made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.005 mm² to 630 mm². Those single wires do not hold a fixed position inside the strand. Their position relative to one another undergoes a permanent change along the entire length of the bunch. The construction of a bunch is derived from the cross-section required, which leads to the electrical conductor featuring a certain resistance level. Different cross-sections with the same resistance value can be generated by applying single wires of varying sizes. Owing to their good efficiency our bunched single wires are versatile in a multitude of applications in cables and conductors.

Wires with a particular shape (neither round nor flat wire). Subject to our customers’ specification there are various conceivable solutions such as triangle, polygon, bones or trapeze shape, and many more. Made from Cu-ETP1 and Cu-OF1 in bare, soft annealed or hard. LEONI Histral® alloys upon request. Cross-section: up to approx. 2.5 mm², depending on shape, further cross-sections upon request. Profile wires are mainly suitable for electrical conductors in a plastic profile and for busbars. They are space saving and have bigger contact areas. Certain shapes give a more secure hold in plastic profiles.

Testing & Certification of welded structures and electrical conductors

In electric equipment and devices, as well as in electric system of railway.The conductor is made from copper multi-core wire by twisting, class IV flexibility according to standard GOST 22483-2012. Nominal section of the conductor is 1.5-up to 150mm2.according to the sections it is as follows: 1,5 : 6mm2 inclusive 50m 10 : 25mm2 inclusive 2000m 35 : 70mm2 inclusive 1000m 95 : 150mm2 inclusive 500m By the request and agreement with the customer conductors with different construction length can be manufactured.

The featured Singlemode (SM 9/125) metal coated fiber operates in both, 1310 nm and 1550 nm wavelength ranges, according to G.652 A/B standards. The fiber is supplied with either 24 kt Gold or Aluminum coatings. As an electric conductor, these types of coatings provide the user with the ability to terminate the fiber directly to the coating, supporting hermetically sealed assemblies. Gold and Aluminum coated fibers are most capable of withstanding high temperatures and harsh environments compared to conventional coated fibers. The fibers have low stress corrosion susceptibility and offer superior mechanical protection in the most challenging harsh environments. All metal coated Singlemode fibers are 100 % quality tested to Heracle‘s stringent test procedures in accordance TIA/EIA and international Fiber Optic Test Procedures (FOTP). Custom specific tests to verify application requirements are available.

heracle offers germanium doped fused silica graded index multimode fibers needed for data communication at the optical wavelengths 850 nm and/or 1300 nm. The metalized optical fiber is supplied with either 24 kt Gold or Aluminum coatings. As an electric conductor, these types of coatings provide the user with the ability to terminate the fiber directly onto the coating, supporting hermetically sealed assemblies. Gold and Aluminum coated fibers are capable of withstanding extreme temperatures and harsh environments. The manufacturing process utilized in the production of these fibers result in low stress corrosion susceptibility, and thus offering improved mechanical protection to the optical fiber when used in the most challenging harsh environments. All metal coated graded index fibers are 100 % quality tested to Heracle‘s stringent test procedures in accordance with the Telecommunications Industry Association (TIA/EIA) and international Fiber Optic Test Procedures (FOTP).

EMTA Conductor & Cable has worldwide experience in rod manufacturing for different standarts and countries. EMTA has produced in excess of 60,000 metric tons of Continuous Cast Aluminum Rod in its own plants in Kadirli. EMTA Aluminum Continuous Casting and Rolling lines are designed to produce pure electrical conductor grade aluminum rod by using A7E (purity of 99,7%) and A8 (purity of 99,8%) and alloy conductor grade aluminum rod coils directly from pure molten metal on a continuous basis. EMTA can produce heat-treatable alloys rod with tempers supplied which from F (as Fabricated) to T4 (Thermally Treated). EMTA manufacturing lines are designed to produce from 9.5 to 15 mm diameter rods in level wound coils and packed in both "Eye to Side" and "Eye to Sky" coils of 2 tons covered with paperboard and plastic shrinkage to be delivered on wooden pallets.

Fastons serve for extending or finishing separate conductors used in electrical or automotive industry. Depending on the use, Stancmetal produces different faston types such as faston tabs, flat plugs, splices, socket contacts, cable lugs, ring tongues, spade terminals, etc. Our company’s fastons conform to German DIN standard, they are made of brass and steel strip with nickel and tin coating. Our fastons enable fast connection between conductor and appropriate device. A quality contact is the one which doesn’t lead to changes while establishing it between fastons after switching on and off for ten times.

Device details: ■ Preparation of cable samples for further processing ■ Applicable for cable types with solid core cross-sections ■ E.g. Sample preparation for cutting with ORC family

Device details: ▪ Easy separation of cable jackets from the electrical conductor ▪ Suited for samples with a high strip force ▪ Also designed for larger sample outer diameters ▪ Suitable preparation before cutting cable samples for measuring (e. g. with the ORC-series)

Electrophoresis and Powder Painting is performed by a fully automated new generation painting system Pre-treatment Preparation of the surface to be painted is the key to successful painting, ensuring adhesion of the layer of paint and resistance to corrosion. Parts are pre-treated non-stop in a tunnel divided into eight stages, using environmentally friendly chemicals; the plant has already been prepared for use of the new nanotechnologies. Pre-treatments: Pre-degreasing Degreasing Rinsing Rinsing Activation Phosphatizing Rinsing Demi-rinsing Electrophoresis Electrophoresis painting is a painting surface treament which gives parts made of iron, steel and other alloys (electrical conductors) improved ability to resist corrosion. It is characterized by uniform depositing of epoxy resin on the surface of the part, ensuring long-lasting good protection against aggression from chemical agents and other factors; it also ensures improved adhesion of top coats of paint. Electrophoresis painting offers several important benefits: Uniform thickness and total covering of all parts, including sharp corners. Ability to control the thickness of the paint by adjusting application voltage and time and paint temperature. Thicknesses of 15 to 40 µ may be obtained, depending on the type of paint (the newest paints can even reach thicknesses of 60 ÷ 70 µ). Excellent resistance in saline mist tests, more than 500 hours, thanks to crystalline phosphatization pre-treatment. Good appearance and therefore top quality finish: the coating of paint is distributed perfectly over the surface. Following electroplating, treated elements are rinsed with ultra-filtered water at the rising unit in the circuit, permitting near-total collection of the paint that adheres to the elements but has not been electroplated. Electrostatic Powder Painting Powder painting is a surface finishing treatment for parts made of metal (aluminum, steel etc.) and alloys characterized by electrostatic application of powder paint which is then polymerized in a kiln. Powder painting prevents corrosion and makes the objects treated resistant to chemical and atmospheric agents. It also permits creation of a vast range of different surface colors and effects: orange-peel, embossed, hammered, etc. The powder painting procedure is ecologically sound because it significantly reduces risk to workers and the environment. Powder painting, electrophoresis or sanding: our mission is achieving excellence in our work through advanced technologies and careful choice of materials. This great care and commitment allows us to pass on the savings resulting from quality and durability to our customers.