Electric mixers - Import export

The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

FR - Electric drum mixer The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.

The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker.

The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M series mixers can be supplied as follows:

CR-M - Electric tote tank mixer for stainless steel IBCs The tote tank mixers CR-M are designed for operation on stainless steel containers with filling openings of DN 400 mm and mixing volumes from 400 l up to 1,500 l. Depending on the viscosity of the mixing material, CR-Ms with fast running or gear reduced drives are available. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gear). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The manway lid is supplied by the container manufacturer or by the customer. The impellers are designed to fit through the filling opening DN 400 when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker. The electric container mixers can also be supplied with frequency converter drives. All CR-M...

CR-E - electric tote tank mixer for plastic IBCs The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. CR-E 6 0,75 The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric...

Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.

FR-LX - Lightweight mixer Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.

Electrical tote tank mixers for stainless steel IBCs The LRK-C series tote tank mixer and their drive units LRK-A are a special solution designed for operation on stainless steel containers with filling openings of at least 400 mm and mixing volumes from 400 l up to 1,500 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The mixing unit that remains in the container is connected to the drive unit with a bayonet coupling and a clutch. The drive is dismountable so that one drive unit can be used for several mixer units interchangeable. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The agitator shafts are borne in a bearing housing, which is welded into the container lid on the product side. The impellers are designed to fit through the filling opening DN 400 when being inserted.

Electric drum mixer for highly viscous media. The FR-HX is Geppert Ruhrtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the tank. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FR-HX is by default equipped with an on-/off-switch with low voltage breaker and – upon request – with a connection cable. . The FR-HX could also be equipped with a frequency inverter upon request. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (Device group II, category 1-3).

FR-HX - Highly viscous media Electric drum mixer for highly viscous media. The FR-HX is Geppert Rührtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the tank. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FR-HX is by default equipped with an on-/off-switch with low voltage breaker and – upon request – with a connection cable. . The FR-HX could also be equipped with a frequency inverter upon request. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (Device group II, category 1-3).

LRK-C mit Antrieb LRK-A Electrical tote tank mixers for stainless steel IBCs The LRK-C series tote tank mixer and their drive units LRK-A are a special solution designed for operation on stainless steel containers with filling openings of at least 400 mm and mixing volumes from 400 l up to 1,500 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The mixing unit that remains in the container is connected to the drive unit with a bayonet coupling and a clutch. The drive is dismountable so that one drive unit can be used for several mixer units interchangeable. The mixer is mounted on the container’s manway lid, which is clamped with butterfly screws or a clamp ring. The agitator shafts are borne in a bearing housing, which is welded into the container lid on the product side. The impellers are designed to fit through the filling opening DN 400 when being inserted. If required, the electric tote...

•The machine works with an electric motor. • Feed mixer is produced in order to ensure a homogeneous mixture of different feeds and to distribute this mixture equally to animals. Thanks to this machine, feed utilization coefficients of animals are maximized. • Feed feed prepared with feed mixer is easier to digest. • A significant increase in the meat and milk yield of animals is achieved. • Feed (ration) prepared with feed mixer is more homogenous than the feeds which are fed by hand, this homogeneity allows the animals to eat more feed. • Meat consuming feed mix machine will consume feed at the same rate and with the same homogeneity. • Feed mixer fills fiber feed by chopper blades. It provides homogeneity by mixing the fiber feeds which are shredded with the other feed materials. In this way; fiber feeds are prevented from being digested without digestion.

*Housing: ABS and stainless steel *Copper motor, 250W-400W *Copper power cord *5 Speed *2 pcs iron plating beater *2 pcs iron plating hook *Frequency: 50/60HZ

8.00m x 2.55m sized wooden paneling on the exterior, carcass made of ST52 Galvanized mild steel, torsion axles with a carrying capacity of 3500 kg. In accordance with the exterior visuals, clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5cm 120 density stone wool heatsink between roof, floor and walls insulation, Bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and tap installation, sanitary ware Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lacquered cabinet, sink, kitchen mixer installation, electrical installation with fire-proof cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double-glazed joinery, air conditioning system prepared according to 12.

6.50m x 2.55m sized torsion axles with wooden paneling on the exterior, carcass made of ST52 Galvanized mild steel, 3500 kg carrying capacity. In harmony with the exterior visuals, clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5 cm 120 density stone wool heatsink between roof, floor and walls insulation, Bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and tap installation, sanitary ware Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lacquered cabinet, sink, kitchen mixer installation, electrical installation with fire-proof cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double glazed joinery, air conditioning system prepared according to 12.

6.50m x 2.55m dimensions with wooden paneling on the exterior, carcass made of ST52 Galvanized mild steel, torsion axles with a carrying capacity of 3500 kg. In accordance with the exterior visuals, clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5cm 120 density stone wool heatsink between roof, floor and walls insulation, Bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and tap installation, sanitary ware Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lacquered cabinet, sink, kitchen mixer installation, electrical installation with fire-proof cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double-glazed joinery, air conditioning system prepared according to 12.

8.00m x 2.55m sized wooden paneling on the exterior, ST52 Galvanized light load manufacturing, 3500 kg carrying capacity torsion axles. In harmony with the exterior images; clamp roof and side cladding, thermowood wood (baked fin pine), aluminum joinery, composite panel cladding, Thermowood wood cladding on interior walls and ceiling, 5 cm 120 density stone wool heatsink between roof, floor and walls insulation, bathroom; clean and waste water installation, toilet bowl, shower cabin, sink and faucet installation, sanitary ware accessories Bocchi Ground; self-jointing laminate flooring, Kitchen; solid oak panel countertop, kitchen shelf, lake cabinet, sink, kitchen mixer installation, electrical installation with fire resistant cable, switch and grounded socket installation, Exterior and interior lighting equipment installation, Door and double glass window joinery made of black matte aluminum, 4+12+4 double-glazed joinery, air conditioning system prepared according to 12.

Termoakım Galaxi Smart electric combi boiler is the prominent product of its class with its aesthetic design and stylish appearance. Thanks to its electrostatic powder paint body design, it can be used for many years. The device has a simple and convenient control panel. Its advanced processor allows all functions to be controlled on the screen. All diagnostics and device information are displayed on the screen. The Termoakım Smart technology used in Termoakım Galaxi Smart electric combi boilers enables the mixer heat exchanger to reach the desired temperature very quickly. Thanks to the special capacity control system; While reaching the desired temperature, the device reduces its power gradually and saves money. With the time clock application offered in the standard features of the device, desired temperature values ​​can be defined for 5 different time zones during the day, this feature provides energy savings.