Electric drive systems - Import export

Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.

A drive motor can also act as a generator. If the drive system is built so as to allow reverse power to flow then this power can be fed into a resistor, thus taking energy out of the system and causing whatever is driving the motor to slow down. Following to this the braking resistor converts the stop energy into heat. Electrical drive systems are being used more and more on ships, oil rigs, crane barges and offshore vessels of all types. An important benefit from using an electric drive is that reliable systems of regenerative and dynamic braking resistors are available to complement or replace traditional mechanical braking systems. The advantages of electric braking include control, reliability, mechanical simplicity, weight saving and in some cases the opportunity to make use of the regenerated braking energy. The Braking Resistor Units from Klöpper Therm are designed according to specific applications.

Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a broad temperature range For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden cables and brake mechanisms in aircraft, sliding parts in shock-freezing systems etc. Lubricating grease for plastic/plastic and plastic/metal pairs and elastomers For plastic sliding coatings in bridge supports and as a parting agent in plastics processing Advantages and benefits Highly effective due to optimum formula Broad temperature range with a wide range of possible uses Excellently suited for lubricating plastics and elastomers Lubricating grease resistant to ageing, especially at low temperatures

Synchronized forming and cutting by tilting movable lower platen to 80 degrees Sheet pitched by double toothed chains and move on abrasion resistant slide plates; Lengthened pan design allows to reach optimum forming heat without using pre-heater machine Upper and lower Mold ; heats control by indivudial Thermoregulation device Fine adjustment for mold by electric drive. Traversing and tilting moving system of mould PLC for control the line operation and supervise working parameters Opportunity to set one or more forming cycles without cutting by pneumatic drive High production capacity with resistant to high speed Strong and vibration free main body Double inlet- outlet system for fast cooling by increasing water discharge. Energy analyzer which gives amount of the electric consumption Cutting adjustment possible by digital meter ,controlled by PLC. Plug asist motor

Our track cone crusher scalper screen, model PTK144, is engineered for superior performance and efficiency in various screening applications. This advanced equipment features a hybrid drive system, utilizing motors from Volvo, Cummins, or Perkins, adhering to Tier 3-4 emissions standards. The scalper screen has a top deck size of 4,000 x 1,400 mm and a bottom deck size of 3,380 x 1,300 mm, ensuring efficient material separation. With a weight of 22,500 kg, it combines robust construction with operational flexibility, making it an ideal choice for diverse screening needs.The PTK144 scalper screen features a state-of-the-art hybrid drive system, combining the power of diesel engines from Volvo, Cummins, or Perkins with the efficiency of electric motors. This innovative drive system ensures robust performance while reducing fuel consumption and emissions. The hybrid technology aligns with modern sustainability standards, offering an eco-friendly solution for operators seeking high-perform

Technical Specifications of Our Track Cone Crusher Scalper Screen Our track cone crusher scalper screen, model PTK144, is engineered for superior performance and efficiency in various screening applications. This advanced equipment features a hybrid drive system, utilizing motors from Volvo, Cummins, or Perkins, adhering to Tier 3-4 emissions standards. The scalper screen has a top deck size of 4,000 x 1,400 mm and a bottom deck size of 3,380 x 1,300 mm, ensuring efficient material separation. With a weight of 22,500 kg, it combines robust construction with operational flexibility, making it an ideal choice for diverse screening needs. Advanced Hybrid Drive System The PTK144 scalper screen features a state-of-the-art hybrid drive system, combining the power of diesel engines from Volvo, Cummins, or Perkins with the efficiency of electric motors. This innovative drive system ensures robust performance while reducing fuel consumption and emissions.

SMART, COMPACT MULTI-PROCESS Lincoln Electric's Weld Pak 2000 is a complete multi-process continuous voltage arc welding machine ideal for welding thin sheets and repair and maintenance work. This machine is a perfect tool for light steel applications and is mobile, meaning the operator can easily move this MIG welding machine to any location in the workshop. Weld Pak 2000 is recommended for MIG/MAG applications, for arc welding with Innershield gas-free flux-cored core and applications with Rutile and Basic electrodes. This machine is designed to feed wire from 0.6 mm to 1.1 mm (steel, stainless steel and flux cored) on B300 and S200 coils. High quality welding performance that depends on a quality wire drive system. Lincoln Electric has equipped the Weld PAK with a professional feeder with large rollers. The Weld Pak 2000 is designed to meet Lincoln performance and reliability standards. : Compact design with a standard

Wireless and Bluetooth connectivity combined Wireless operation for two-motor drive systems, double electric bed base: The receiver has a built-in 2.4GHz two-way radio controller, as well as a built-in Bluetooth chip for connecting to Android and iOS devices. It can be combined with 2.4 GHz two-way wireless portable transmitters. The device also has an integrated triple floor lamp, a button for the reset function and a blue LED operating status display for the Bluetooth function. The pairing process is easy thanks to confirmed visual feedback – so users can see the connection status at a glance. Another useful feature is the custom programmable memory function. This allows multiple defined and stored positions to be controlled at the push of a button. Ergonomic and elegant in design The receiver stands out above all due to its ergonomic and simple design, without screw connections.

The Strippit E Series servo-electric punch press is energy efficient, economical to operate, and offers precise control over the ram for consistently accurate forming operations. The electric press drive system uses fewer mechanical components, keeping machine reliability and uptime high, and maintenance costs to a minimum. A 47-station turret features three 88,9 mm auto-indexable stations for tremendous tool-carrying capacity and flexibility. KEY FEATURES Servo-electric press drive – average power requirement of 20 kVA Large capacity 47-station thick turret Three programmable 88,9 mm auto index stations Indexable multi-tool capability offers more capacity Quick-change die holders Smart Clamp ensures the smallest possible no-punch zones 25 mm feed clearance for more forming capacity Efficiently handles thicker materials with 20 metric tons of punching force Integrated Touch-P control is intuitive and simple to use PERFORMANCE-ENHANCING OPTIONS CADMAN-P programming software

ADVANTAGES: -fast transformation of an open summer playground into a warm winter one; -more efficient ventilation of the room while maintaining heat inside; -use of the system for effective protection against wind; - the zone of parking of shutters in the lower position forms a fence for zoning and safety; - parking of shutters in the top position frees up space for free movement; -possibility to use a choice of single tempered glass or energy-saving glass; - vertical movement of shutters by means of the electric drive; -control of systems by means of the panel, both all simultaneously, and separately.

We have all the components necessary to build your own electric vehicle drive system configured to your need, including LED display, control units, battery, motor and software, perfect for implementation into small and mid-size vehicles. There are too many features to our Powertrain/Drive System Solution to fit here. To give an example, 10 key aspects listed below: • Bespoke Software, Enable Tool > automatic self-learning function > "ready to go Setup" • Approx. 1200 Parameter can be freely configured using Bluetooth & USB Interface • CAN Bus Communication • 2 analogue and 2 digital Inputs • Motor Boost function / Reverse Gear • 48V System for a safe solution (Safety Extra Low Voltage, SELV) • Range from 250W – 12,000W Peak Power • Electric field oriented control incl. electric field weakening • Battery Recuperation • Complete system designed and built at one source! If you have any technical questions please get in touch! 01423 796240 hello@haredata.co.uk

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

Installation accessories are standard materials which are necessary to use for the mounting of the cable management systems and supporting accessories.Available finishes for our fixing accessories are Electro galvanized, Lacquered and Stainless Steel products.

E-LINE Binrak Channels Series are manufactured as Pre galvanized in a Standard heavy service type according to TSE and ISO 10143 standards, hot dipped according to TS EN ISO 1461 standard in 3mr Stainless steel lengths (304, 304L, 316, 316L) as standard. It is designed to hold the support systems in facilities and buildings as well as mechanical, electrical and industrial products.Provides immediate and easy assembly with the rapid traverse nut connection. Due to its modular design structure, it allows connection from any point and reduces the margin of error.

E-LINE A series and E-Line Seismic suspension systems are used in buildings and factories; in concrete or steel structures to support the Busbar, Conduit and Cable Ladder etc. Service and lightweight suspension type variations are available according to the weight of the system to be supported.Together with the evolving installation, it offers optimum solutions for the installation of the support systems.

URC (Uni-Rail Conductor) Trolley Busbar are designed where each conductor is assembled as a separate line and the current collector car performs uninterrupted energy transfer to the device.E-Line URC Trolley Busbar can be used indoors and outdoors, in harsh conditions as the conductors are in separate housings. Eliminated the use of suspended and reeled cables in conventional system.

The electricity is conveyed from the conductors via the brushes in the trolleys, which move with the machinery, to supply continuous power to the mobile machinery This eliminates the possibility of accidents and malfunctions associated with the movement of cables.

E-Line FLD Indoor Busbar Trunking Systems provides aesthetics for offices as well as safe, practical and flexible solutions thereby eliminating cable clutter. E-Line FL/FLD can be installed on skirting or at table level where Main or UPS power is required, or where structural cabling is required.

Rapidly increasing electricity, data and multimedia requirements in various types of factories, work places and living areas are also required in new building designs. For this reason, flexible, sound, modular, safe and aesthetic infrastructure systems that will conform to rapidly changing and continuously increasing requirements in new buildings are gaining momentum.

Lighting Distribution Busbar (25A - 32A)E-Line DL/SL group Busbar Trunking Systems are used in lighting circuits that require 25 A and 32A single phase or three phase electrical current in buildings and industrial facilities. 10A / 16A tap off plugs (with and without cartridge fuses) are designed to supply lighting circuits according to their attributes.

Low-Power Busbar System (40A-63A)E-Line KY-S Busbar Systems has been designed for buildings and industrial facilities which have lighting and outlet circuits with small electrical machinery and equipments that needs three phase and/or single phase energy needs with 40A and 63 A. KY-S Busbar with its 10A – 16 A tap-off plugs and 32A tap-off boxes are being produced fully automated machines that uses most recent technology in accordance with ISO 9001 and with its quality assurance system certification. Products has been designed in accordance with IEC 61439-6 and tested. Busbar housing is being produced as pre-galvanized sheet also if requested it could be produced as painted with RAL 7038 color.

The Electroalfa primary distribution switchgear are designed for 7,2 and 24 kV rated voltages and rated currents up to 4000 A. Compliant with the technical standards of nationwide power generation, transport and distribution companies such as Transelectrica (the national transmission operator), CEZ Group, E.ON Group, Electrica Group (area distribution operators). The Electroalfa switchgear for primary distribution, of the S 12xx range, for a maximum voltage of 12KV c.a., have been tested for values of the continuous rated current of up to 5,000A and values of the rated peak withstand current of 50 KA/ 1s. This type of gear withstands the action of the internal electric arc, with a classification index of up to IAC AFLR 50KA, 1s. The switchgear from the range of S 24xx, for a voltage of 24 KV c.a. have been tested for values of the continuous rated current current of up to 2.500A and values of the rated peak withstand current of 25 KA/ 1s.

Own contrivance product, the DISMOD board is the optimal solution in electrical distribution, automation, motor control and protection for all industrial applications, infrastructure, commercial and residential buildings. All type-test assemblies (TTA) have been successfully achieved at the panel testing in an independent testing laboratory in Romania. A tested product offers the guarantee for a tested technical solution, an optimal internal architecture, continuous functioning of the served installation under conditions of maximum safety and the possibility of further expansion with minimal changes.