Results for
GSW SCHWABE AG
Germany
electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air
Request for a quoteGSW SCHWABE AG
Germany
HybridTechnology — just for automobiles? CompuSpray is the LubricationHybrid featuring a perfect addition to the PressSpray Technology, this system will allow selective spray lubrication while fully boxed in a stainless steel housing. Special brushes evenly spread the pulseactivated lube on the strop and prohibit any mist from exiting the system. Excess lube is collected and drained back into the reservoir. 45° angled entry or exit strip guide, made of stainless steel; to support threading if CompuSpray is mounted right after the Feeder GSW offers integration into its electrical controls system for intelligent choice of individual nozzles. this way, a minimal and exactly defined lubrication according to the feeding pattern is possible. The programming and visualization becomes part of the main PLC – for an unbeatable priceperformance ratio!
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Hybrid Technology – Smart Assembly Solutions The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. During the tightening process, four different variables are measured and monitored: Torque - Angle - Time - Nº. of Impulses. Torque transducer measures directly and transmits the signals contactless. Detects cross threads, double hits, contamination, etc. Special feature to prevent cross threaded tightening: reversely rotating a bolt to a preset angle at the start of tightening. Combinations of buzzers and LED (Green / Red) for operator feedback on OK / NOK tightenings. [...]
Request for a quoteNMG ITALIA - MOVING SOLUTIONS
Italy
The MC 32S Radio-Controlled Electric Self-Propelled Crane, with its 32 quintal capacity and 7 meter lift, is ideal for maneuvering in small spaces without giving up excellent performance.
Request for a quotePROFELEC
France
Your reference product A9C20137 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteBELGOMILK IA SA
Greece
Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket
Request for a quoteBELGOMILK IA SA
Greece
Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket
Request for a quoteBELGOMILK IA SA
Greece
Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket
Request for a quoteBELGOMILK IA SA
Greece
Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket
Request for a quoteBELGOMILK IA SA
Greece
Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket
Request for a quoteBELGOMILK IA SA
Greece
Made internally 2B and externally SATINE Bottom with a slight inclination for certain emptying. Insulation with a thick layer of environmentally friendly polyurethane Butterfly type safety valve for emptying (DN50) Curved bottom for complete emptying Measuring stick (pointer). Regulator for alignment Cooling unit Type R404 coolant Small size and ergonomic placement Manufactured in accordance with ISO 5708 BII standard Electrical automation panel, waterproof IP55 Electric control system for the stirring program and the milk temperature, which is displayed digitally Cable with a plug that can be connected to a socket
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accessories used for mechanical parts.
Request for a quoteSTIL ELEKTRONIK
Turkey
A graphic overlay may be the first thing your customer or end user sees when interacting with your product. It must be durable, attractive, and functional. Thanks to our graphic overlay printing expertise, Stil Elektronik , can manufacture your custom graphic overlay in a variety of shapes, sizes, and materials to ensure durability. In fact, with sub-surface graphics, printing is done on the inside of the overlay, so your overlay’s graphics won’t degrade from use or cleaning. Stil Elektronik , offers a variety of overlay materials with thickness ranging from 7 mil to 30 mil. Selecting the graphic overlay material depends on the end user application and the environment in which it will be used, including exposure to sunlight and chemicals. Cost is also a consideration. Polycarbonate and polyester are the most commonly used materials for graphic overlays.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
STIL ELEKTRONIK
Turkey
Crosswise Dimension (DS) / External Dimensions (E) / Screening Dimensions (V) / Active Dimensions (A)
Request for a quoteSTIL ELEKTRONIK
Turkey
Stil Elektronik combines electroluminescent technology with membrane switch technology and brings it into use in the areas where homogenous lighting is needed, for several industries such as machinery, security, marine electronics, automotive, marketing etc. Electroluminescent technology is technically and visually better than the LED technology and it works properly in all kind of condition and temperature. It has 4 different colors as standard. On the other hand it is possible to brighten the printings by using transparent paints, in case of demand of different colors. There can be various colors on one panel as well one color too.
Request for a quoteSTIL ELEKTRONIK
Turkey
Electroluminescent means “Cold Radiation” working with electrical high frequency. There is no resistance or filament directly in this technology. Electroluminescent only lights up with “High Frequency”. For this reason, Electroluminescence is called Cold Radiation. Although Electroluminescent takes the name cold radiation, Electroluminescence emits very little heat (25 degrees) outside. Electroluminescence never burns the hand that can be touched. Electroluminescent need Inverter, which is a kind of transformer, to make the light. With “high frequency” electrical energy supplied by INVERTER, it strikes the barrier between the pressures and gets stuck, FOSFOR, which cannot find a place to escape, thus emerges as LIGHT.
Request for a quoteSTIL ELEKTRONIK
Turkey
In this type of production, we can also perform electroluminescent lighting application and LED lighting application. In this type of production, ITO Film is used and production can be made by etching method or silver conductive printing method. Since the structure of ITO is permeable to light, our customers generally prefer ITO in illuminated capacitive circuit structures.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product; There is embossing on the surface and the backside is folded with glue. The key areas are enhanced by embossing and it is produced with metal dome according to the usage of customers.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product; There is embossing on the surface. The short circuit is done between silver and metal dome. Surface mount LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product; there is no embossing on the surface. The short circuit is done between silver switch and metal dome. Surface mount LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product; both switches are silver, The embossing is done on graphic panel and so it provides sense of touch on switch. Surface mount LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product; there is embossing on the surface. The short circuit is done between silver switch and metal dome.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product; no embossing is made on the surface. The short circiut is done between silver switch and metal dome.
Request for a quoteSTIL ELEKTRONIK
Turkey
On this type of product, the switch type is designed as flat. Short circuit is provided with silver switch. Surface montaged LED’s are used which has high intensity of light, able to lighten in 90 and 180 degree, have transparent and opaque colors.
Request for a quoteResults for
Electric controls - Import exportNumber of results
1,070 ProductsCountries
Company type
Category