Drying chambers - Import export

Moringa, also called the "miracle tree", is known for its nutrient-rich natural quality and contains more than 90 nutrients, vitamins, proteins and more. The Moringa leaves in our tea are harvested by hand, selected and freed from dust in a water bath. Then they are very gently dried in low-temperature drying chambers powered by solar energy. It is precisely this process that makes our tea so tasty and unique. -Grated Moringa leaves refined with ginger, liquorice and cardamom. -Gently processed, pure and natural -100% vegan moringa leaves from wild growth -The powerhouse Moringa has a high bioavailability and can be completely absorbed by the body -Original Ayurveda quality from the tropical Himalayan region

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

The AWALIFT 2/2 penta is available in two power levels. The first option offers system power of - up to 25 m3/h for up to 1200 residents and - up to 36 m3/h for up to 1700 residents Despite their small size, the wastewater pump stations offer all the advantages of the AWALIFT series: - our trusted bulk materials collecting chamber system, dry set-up, and thanks to their good power levels, they can move wastewater across long distances. Different motor variants allow the system to be precisely adjusted to your needs. Area of use Draining small towns with up to about 1200 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two centrifugal pumps and motors according to type

Woven strapping is produced in cross webbing technology. It is UV resistant, not sensitive to deep temperatures and can withstand high temperature up to 150°C. Due to these characteristics, it can be used outdoors without limits as well as, for example, in lumber drying chamber and it offers many other versatile solutions for special heavy duty applications in metal, lumber, automotive, steel industry etc. Standard strapping is white, produced in range from 5mm to 38mm and breaking strength from 120kg to 3000kg. All woven products can be printed and fully coloured. We are very proud to be first manufacturer worldwide that found a solution to deliver Woven strapping in bags, which was reserved in the past only to lashing strapping. Our both Germanischer Lloyd certified 32mm Woven strapping in bags – 2000kg and 2300kg – are an excellent and more economical replacement for lashing in many different applications.

100% beech firewood: 1 MP or 1.8 MP mesh pallet box 1 MP pallet weight less than 440 kg;1.8MP pallet weight less than 790kg dried only in drying chambers humidity below 20% length of the log 33 cm SGS certificate

Woven strapping is produced in cross webbing technology. It is UV resistant, not sensitive to deep temperatures and can withstand high temperature up to 150°C. Due to these characteristics, it can be used outdoors without limits as well as, for example, in lumber drying chamber and it offers many other versatile solutions for special heavy duty applications in metal, lumber, automotive, steel industry etc. Standard strapping is white, produced in range from 5mm to 38mm and breaking strength from 120kg to 3000kg. All woven products can be printed and fully coloured. We are very proud to be first manufacturer worldwide that found a solution to deliver Woven strapping in bags, which was reserved in the past only to lashing strapping. Our both Germanischer Lloyd certified 32mm Woven strapping in bags – 2000kg and 2300kg – are an excellent and more economical replacement for lashing in many different applications.

Chamber dryers are ideal for small lot sizes and intermittent drying. Chamber dryers are suitable for the batch drying of the most diverse goods and for large-format parts with long drying times. The drying process can be individually adapted to the parts by means of the drying duration or temperature. The dryers are fed either manually or fully automatically.

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

At A+B Electronic you receive all services from a single source. In addition to the pure assembly, we are also happy to take care of the coating of your assemblies. The conformal coating serves to protect the surface of the assemblies, e.g. against condensation or contamination. In the process, the paint is applied using a curtain casting process under low pressure. The coating is only applied selectively where it is needed. Here we work with a programmed coordination system that is precisely tailored to your assembly. To dry, the elements are placed in our drying ovens and chambers so that the paint can cure in the atmosphere. What speaks for us: -Contact person for prototypes, large or small series -A high mix of components is not a problem -We are not just a service provider, we are a technology partner: A + B Electronic thinks your project with you and together we can bring it to series production

We produce and sell pallet board 20*140*800/1200, chamber drying, disc sawing, 1-2 grades. More than 300 m3 are available in the warehouse. $ 245 m3. Prices are indicated on the terms of FCA, Ukraine.

We produce and sell pine lumber, namely in stock 39*100/200*5400/6000. Chamber drying, humidity up to 20%, 260m3 in storage. We manufacture lumber according to the client's specifications. $ 280 m3. We have volumes. Prices are indicated on the terms of FCA, Ukraine.

Chamber drying: Grade 1 = 950 euros/m3 (humidity up to 12%) Grade 2 = 850 euros/m3 (humidity up to 12%) Grade 3 = 750 euros/m3 (humidity up to 12%) Freshly sawn: Grade 1 = 850 euros/m3 (natural humidity) Grade 2 = 750 euros/m3 (natural humidity) Grade 3 = 650 euros/m3 (natural humidity) Prices are indicated on the terms of FCA, Ukraine.

Capacity: 250-2000 kg/h Thickness of product: 0,9-1,1 mm Raw materials: flour, semolina Energy source: liquid fuel, solid fuel, electricity, gas Control system is carried out with controller and TOUCHSCREEN Key features of the production line: - apart of short cut pasta it is possible to produce potato pellets on the same line - automatic batching system of raw materials is foreseen - machinery provides homogeneity of mixing of components - high quality of the product due to mixing and pressing is made in vacuum conditions - press is completely automatic - flexible system for the adjustment of product dimensions is foreseen - humidity and temperature in the dryer are maintained automatically - different recipe can be use - design of lines can be developed according to customer’s production premises Equipment set of the line: - bag tilting device - flour sifter-batcher - press - trabatto - elevator - drying chamber - cooling chamber - elevator - storage hoppers