Drawn wire - Import export

Tungsten is a silver-white, metallically shiny or grey heavy metal (depending on whether it occurs in pieces or in powder form). Hard and brittle, tungsten can, however, be made ductile by hammering and drawn into thin wires, for example. Tungsten belongs to the group of refractory metals, which are characterized by high melting points, good thermal conductivity and low thermal expansion, among other things. High corrosion resistance is a further characteristic. Tungsten is suitable for the construction of resistance heating elements, the manufacture of filaments (especially in high-temperature furnace construction and electrical engineering), engine parts, X-ray anodes and welding electrodes. Pins made of tungsten can be fused into high melting point glass for the passage of current. Tungsten is also used in nuclear technology. Tungsten alloys are used about 80% in the steel industry and about 10% each in the hard metal and electrical industries.

Wire Drawn Disc Brush

Specialist Brushes_Hand Wire Drawn Brushes476

Aluminium wire We manufacture hard drawn and annealed aluminium wire at our site in Rothenburg/Saale. Materials / DIN EN E-aluminium according to EN 60889 Aluminium-magnesium-silicon alloys according to EN 50183 Aluminium content min. 99.5 % Aluminium for cold forming parts

The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

The rotor type wire straightening machine RI 8 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 3mm to Ø 8mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 8/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high dynamic stresses. Also for wire shapes that require severe bending. According to EN 10270-1 and ASTM A 227

APPLICATION OF HARD DRAWN STEEL WIRE Compression springs, extension springs,and torsion springs for high and dynamic stresses. According to DIN 17223:1964-1

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression and torsion springs that are mainly submitted to high static strains and to medium levels of dynamic strains. EN 10270-1 ASTM A 228

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to high static stresses or moderately dynamic stresses.

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high static stresses or, rarely, dynamic stresses.

APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are chiefly subjected to low static stress. According to EN 10270-1 and ASTM A 227

Tecno Impianti designs and manufactures straight-line multipass wire drawing machines Mod. TR for the dry wire drawing of thin wires. Our range is composed of machines for processing wire with maximum inlet diameter 6,0 – 6,5 mm., for obtaining wire with minimum diameter 1,80 mm. and machines for processing wire with maximum inlet diameter 3,0 mm., for obtaining wire with minimum diameter 0,80 mm. The take-up of the drawn wire is on reels, or in form of coils of drawn wire.

Tecno Impianti designs and manufactures straight-line multipass wire drawing machines Mod. TR for the dry wire drawing of thin wires. Our range is composed of machines for processing wire with maximum inlet diameter 6,0 – 6,5 mm., for obtaining wire with minimum diameter 1,80 mm. and machines for processing wire with maximum inlet diameter 3,0 mm., for obtaining wire with minimum diameter 0,80 mm. The take-up of the drawn wire is on reels, or in form of coils of drawn wire.

Tecno Impianti designs and manufacture a series of horizontal wire drawing bullblocks Mod. MO/P, for the drawing of cold heading wire. These wire drawing bullblocks are utilized for big productions of drawn wire and are meant for wire drawing companies which produce cold heading wire or for big manufacturers of fasteners who execute the wire drawing off-line and take the drawn wire to the cold heading machines, in the form of wire coiled on wire carriers or as bound coils. The horizontal wire drawing bullblocks Mod. MO/P are manufactured by us in 4 different models, for covering a range of wire diameters between 6,0 and 30,0 mm. The drawn wire is taken-up on a rotating platform positioned into a hole in front of the capstan. It is taken-out with wire carriers or through a coil extractor.

Tecno Impianti designs and manufacture a series of horizontal wire drawing bullblocks Mod. MO/P, for the drawing of cold heading wire. These wire drawing bullblocks are utilized for big productions of drawn wire and are meant for wire drawing companies which produce cold heading wire or for big manufacturers of fasteners who execute the wire drawing off-line and take the drawn wire to the cold heading machines, in the form of wire coiled on wire carriers or as bound coils. The horizontal wire drawing bullblocks Mod. MO/P are manufactured by us in 4 different models, for covering a range of wire diameters between 6,0 and 30,0 mm. The drawn wire is taken-up on a rotating platform positioned into a hole in front of the capstan. It is taken-out with wire carriers or through a coil extractor.

Tecno Impianti manufactures vertical wire drawing bullblocks, which are utilized for drawing wire of small-medium diameter. They are available in two types: Mod. MV e Mod. MVC. In the models MV, which cover a range of wire diameters from 4,0 to 12,0 mm., the drawn wire can be coiled on the wire drawing capstan and then taken-up with a coil extractor, or, after the wire drawing operation, it can be sent to a vertical spooler which spools it on reels. The models MVC, commonly known as vertical inverted bullblocks, cover a range of wire diameters from 5,0 to 9,0 mm. The wire drawn on this type of machine is taken-up on wire carriers positioned under the wire drawing capstan.

Tecno Impianti manufactures vertical wire drawing bullblocks, which are utilized for drawing wire of small-medium diameter. They are available in two types: Mod. MV e Mod. MVC. In the models MV, which cover a range of wire diameters from 4,0 to 12,0 mm., the drawn wire can be coiled on the wire drawing capstan and then taken-up with a coil extractor, or, after the wire drawing operation, it can be sent to a vertical spooler which spools it on reels. The models MVC, commonly known as vertical inverted bullblocks, cover a range of wire diameters from 5,0 to 9,0 mm. The wire drawn on this type of machine is taken-up on wire carriers positioned under the wire drawing capstan.

Tecno Impianti designs and manufactures coil compactors Mod. CR which are utilized together with our drawing lines equipped with the wire drawing bullblocks Mod. MO/P. The wire drawn by the bullblocks Mod. MO/P is taken-out of the rotating platform through a coil extractor and positioned on the compactor. The compacted coil will be strapped by means of steel strapping unit and then it will be tilted in a horizontal position for permitting an easy unload by a fork-lift truck.

Tecno Impianti designs and manufactures coil compactors Mod. CR which are utilized together with our drawing lines equipped with the wire drawing bullblocks Mod. MO/P. The wire drawn by the bullblocks Mod. MO/P is taken-out of the rotating platform through a coil extractor and positioned on the compactor. The compacted coil will be strapped by means of steel strapping unit and then it will be tilted in a horizontal position for permitting an easy unload by a fork-lift truck.

Corrugated tubes are used to protect cable wires and cable harnesses. When cutting this corrugated tube sheathing to length, it is important to cut precisely and reliably on the crest of the shaft, to avoid forming sharp cutting edges which damage the in-drawn cable wires. Metzner revolutionised the cutting to length of slotted corrugated tubes with the SM 4000 corrugated tube cutting machine. It is the only machine in the world that can guarantee a precision cut on the crest of the shaft due to its unique and patented feed and cutting technology. A laser sensor monitors the production and activates the cut precisely and repetitively with up to 8000 cuts per hour. The SM 4000 with its patented "toothed wheel laser system" is the only machine in the world that guarantees twist-proof feed- and cutting technology for slotted corrugated tubes

Unslotted corrugated tubes are used to protect cable wires and cable harnesses. When cutting this corrugated tube sheathing to length, it is important to cut precisely and reliably on the crest of the wave, to avoid forming sharp cutting edges which damage the in-drawn cable wires. Metzner corrugated tube cutting machines of the CT 4000 series process corrugated tubes with great reliability and precision. Thanks to our many years of experience in processing corrugated tubes, we know the challenges that some corrugated tubes present and are well prepared for them. Our wide range of standard equipment ensures the best possible processing of your corrugated tubes. l The Metzner CT 4200 additionally offers an integrated slitting device for automatic slitting of unslit corrugated tubes. For material diameters from 7.5 mm to 40 mm.

Straightened and cut wire is produced from coils by means of special machinery which straightens the wire and cuts it to specific lengths. We can straighten and cut any wire product that we manufacture, as well as straighten and cut wire that you already own. We maintain our arrow straight precision cut tolerances and lengths to satisfy your every specification. MATERIAL Low carbon and high carbon steel wires, annealed steel wires, galvanized steel wires, bright steel wires, phosphated steel wires PRODUCT STANDARD TS 5287 EN 10218 QUALITY & RAW MATERIAL STANDARD TS 2348- DIN EN 10016 (SAE 1006-1008-1010),DIN EN 10216, 10217,TS 5287-2 EN10263-2 DIAMETERS Ø 2,00 mm - Ø 10.00 mm LENGTH 100 mm - 3000 mm PACKAGING 20 kg up to 1000 kg in bundles

Annealing is a heat treatment process that actually changes the physical and chemical properties of the wire. This is what causes durability and increased ductility while making the wire easier to work with too. Normalization and global annealing are performed: Construction industry – mainly for iron setting in the civil construction field Handicrafts Packaging of products – used as tie wire Silk weaving hay bailing in the agricultural field Fencing products including barbed wire Screw and bolt manufacturing PRODUCT STANDARD EN 10218 QUALITY & RAW MATERIAL SATNDARD EN 10263-1,EN 10263-2 EN 10263-3 EN 10263-4 standarts of SAE 1008, SAE 1006, SAE1018 20MNB 4, CQ 15, QST36 DIAMETERS Ø 1,00 mm - Ø 30,00 mm PACKAGING 50 to 1000 kg coils

STANDARDS TS EN 10218 QUALITY & RAW MATERIAL STANDARDS TS 2348, DIN EN 10016 (SAE 1006-1008-1010, CQ15, ST37,QST 36,20MnB4) DIN EN 10216, DIN EN10217, DIN EN 17223, DIN EN 10025, DIN EN 10263-2, DIN EN 10263-3, DIN EN 10263-4… DIAMETERS Ø 0,70 mm - Ø 30,00 mm PACKAGING 50 kg to 150 kg coils, 1000 kg basket and 500 to 1000 kg Z2 - Z3, 1500 kg Z4 TENSILE STRENGTH 500 - 1000 N/mm2 SURFACE QUALITY clean surfaces painting applications for better coating of PVC and powder according to customer requirements AREAS OF USAGE White goods, automotive sector, screw, nuts, rivets, nails, dowel screws and fasteners

DEMIRSAN bright wire products are manufactured with bright and clean surfaces painting applications for better coating of chromium, nickel, PVC, etc. according to customer requirements. Main sectors of use: White goods Textile Kitchen and bathroom accessories Market shelves, point of purchase displays PRODUCT STANDARD TS EN 10218 QUALITY & RAW MATERIAL STANDARD TS 2348, DIN EN 10016 (SAE 1006-1008-1010) , 10216, 10217, 17223, 10025, 10263-2, 10263-3, 10263-4, SAE 1006, SAE 1008, SAE1010, SAE1018, SAE1020 DIAMETERS Ø 0,70 mm - Ø 30,00 mm PACKAGING 50 kg - 150 kg coils, 1000 kg metal coiler and 500 - 1000 kg Z2 - Z3 coils, 1500 kg Z4 coils

DEMIRSAN manufactures low and high carbon wire for sophisticated applications, as well as a specific range of steel wire ropes. These products comprehensively cover the diverse requirements of a specialized customer base. Bedding and seating wire, spring steel wire, high carbon weaving wire, crimped wire, haulage rope. PRODUCT STANDARD TS 2500 EN 10270 QULAITY & RAW MATERIAL STANDARD TS 2348 EN 10016 WIRE RODS SAE 1045, SAE 1050, SAE 1055, SAE 1060, SAE 1065, SAE 1070, SAE1075, SAE1080, SAE1083, PC1080, PC 1083 DIAMETERS Ø 0,70 mm - Ø 16,00 mm QUALITIES Quality A - (SL) Quality B - (SM) Quality C - (SH) PACKAGING 50 kg to 250 kg coils, 800 kg to 1000 kg metal coiler

Mattress, furniture,textile, automotive and industrial spring manufacture can choose from a wide array of steel wire ranging from 1,20 mm to 5,00 mm diameter manufactured at Boyçelik Wire-Spring Facility. please check our catalouge from above link for technical details.