Dosing stations - Import export

Gravimetric dosing or weight-controlled dosing is based on the principle of weighing technology. The weight of the weighed material is measured via load cells or weighing cells either directly or by loss-in-weight. IFA Technology offers you specific solutions tailored to your individual needs for weighing, mixing and dosing solids or liquids. We consider your individual requirements and build customised dosing systems for you. The system "IFA-Gravimet" is our standard system in the field of gravimetric dosing. We supply a complete, ready-to-operate pre-assembled weighing, mixing and dosing system. As a complete system for weighing, mixing and dosing liquids, the system can be individually customised to suit your requirements.

The flexibly combinable dosing station allows the exact blending of up to seven material components. Two configuration levels are available the DOS 2 (one main and one side component) and the DOS 7 (one main and up to six side components). Dosing is carried out according to customer-specific requirements. The processing of granules and powder is also possible. The dosing station can be flexibly equipped with different funnel weighers and thus fulfills the most demanding processes of gravimetric weighing. Common applications include film extrusion or PVC pipe production with complex formulations. Other advantages/features: — Suitable for complex recipes and special applications — Individually and flexibly configurable (DOS 7 also as 6-component dosing without main component available) — Hopper scale sizes of main and side components freely selectable — Variants for granules and powder

SAVEOMAT Satellite is the innovative vacuum conveying system in which the suction capacity can be split as required. The valve technology on the vacuum manifold allows the power to be split between different material separators. A control of the applied vacuum ensures a constant vacuum during material conveying and guarantees a delay-free material supply. Complete extrusion lines or entire production halls can thus be supplied via a single or several vacuum generators connected in parallel. The suction power is applied as needed for each individual component, ensuring careful feeding, even of critical materials. Other advantages/features: — Splitting of the suction power according to requirements — Simultaneous conveying of several material separators — Vacuum is available immediately — Careful material conveying — Reduction of energy costs — Suitable for PE, PP and PVC granules

Promix gas dosing stations for physical foaming have been specially designed and developed to meet the needs of foam extrusion. Promix gas metering technology is characterized by high dosing accuracy, reliability and amazingly simple operation. Promix gas dosing stations meet all the requirements of a modern gas metering system for foam extrusion. These include high-precision mass flow control, process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible. •,Mass flow from 1 g/h up to 20'000 g/h •,Dosing pressure up to 680 bar

This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the membrane. PUSHCART manufactured in Stainless Steel and complete with the following Storage box in HDPE PVDF lined dosing pump Flexible delivery hose 25m in pvc (reinforced with polyester fibres) Spray nozzle in stainless steel

Promix supplies key components to optimize the production of light foams such as XPS insulation boards, XPET construction boards, XPE foam films, etc. Thanks to the improved cell structure, the foam density can be further reduced, and the throughput of the plant increased, resulting in significant cost savings in production. Replacement of iso-butane for the sake of the environment Iso-butane and other hydrocarbons are excellent blowing agents for high expansion foam production.However, they are also highly harmful to the environment and highly flammable, which increases the production risk. Promix gas dosing stations in combination with other retrofittable process engineering components enable at least a partial switch to the non-flammable and environmentally neutral gases CO2 and nitrogen. Your optimization potential ,Improved mechanical product properties ,Lower foam density ,Replacement of hydrocarbon blowing agents with CO2 and nitrogen ,Increased line throughput

Since the foundation of IFA Technology GmbH, we have been active in the paper industry. Our systems for liquid dosing and solids dosing systems are used in paper production or water treatment and enable you to optimise your processes. With our dosing systems for paper finishing we offer a wide repertoire for the production of paints and impregnating resins. Application of plants and systems for the paper industry: Storage, mixing and dosing of liquids such as impregnating resins, adhesives and release agents Solids dosing with the aid of preparation stations Dosing systems for printing inks

SAVEOMAT Liquid is the multi-component dosing station for the recipe-precise dosing of solid and liquid components. The use of silane and peroxide is especially applied in PEXa and PEXb pipe extrusion and cable production. Precise mixing of the raw material is achieved by combining a static and a dynamic mixer. An injection tube is integrated in the dynamic mixer, whereby the peroxide or silane is introduced and ensures uniform wetting. Thanks to its safety features, SAVEOMAT Liquid meets the highest safety requirements while allowing a wide range of recipes. Other advantages/features: — Recipe-accurate dosing and conveying —Constant wetting of the raw material — Meets the highest safety standards — Dosing and mixing of materials under inert gas atmosphere — Reduction of the peroxide percentage by approx. 10 % through uniform and continuous metering

The fdt dosing stations are made entirely at our factory with the best materials and according to the latest manufacturing techniques. They find applications in all the complementary treatment of water by injection of appropriate chemicals. The fdt Ltd metering stations thanks to the modern design of the injection units and a modern and efficient control systems allows a fully automatic operation. Function and are covered by fdt Ltd warranty, design risk by leading insurance company.

ULTRABLEND medical is a gravimetric batch dosing and mixing station for plastic granules, additives, and regrind. It has been specially designed for pharmaceutical and medical technology applications. The high dosing accuracy and consistency of the ULTRABLEND improves end product quality and saves money by using less additives and reducing scrap. The ULTRABLEND is suitable for direct mounting on small injection moulding machines and extruders. All components are accurately dosed and weighed one after another into a weigh hopper. They are then passed to the mixing chamber where they are homogeneously mixed.

With the volumetric dosing and mixing station SPECTROCOLOR V, motan offers a simple solution for the economic production of plastics parts: precise dosing and homogeneous mixing with highest repeatability. Our unique gravity-mixing principle offers you a high consistency of mix for all the components before they reach the extruder. This plays a key role in guaranteeing you perfect plasticization and homogenization of the materials. SPECTROCOLOR V doses and mixes all easy to normal flowing granular materials. Up to six dosing modules, supports both flood-fed and starve-fed extrusion.