Results for
SÜTHER & SCHÖN GMBH
Germany
Wire rope clips formerly acc. to DIN 1142 Have attention to the note in the download area. * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips. *** similar to DIN
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Wire rope clips similar to DIN 741 for minor purposes * The nominal size corresponds to the maximum rope diameter. ** The minimum quantity refers to the required number (acc. to DIN) of wire rope clips.
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Wire rope clips with shortened bracked to safe the dead end of ropes at asymetric wedge sockets * The nominal size corresponds to the maximum rope diameter.
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Wire rope clip similar DIN 741 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Wire rope clip similar DIN 1142 Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Simplex-, Duplex-clamps, wire rope clips, egg shaoed wire rope clips, varous turnbuckles,thimbles, rope shortenings made from steel and ferrules made from aluminium
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel
Request for a quoteMÖLLER VERBINDUNGSELEMENTE GMBH
Germany
Turnbuckle (available with hook+eye/eye+eye - hook+hook on request) Simplex-, Duplex-clamps, wire rope clips, various turnbuckles, thimbles made from stainless steel
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Eyelet bolts Eyebolts with larger eye (forged) ATTENTION: The strength of the eyelet bolt must be in accordance to the strength of the wire rope. * Please indicate length of thread with your order
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Threaded rods for wedge sockets in special design with property class 8.8 for applications with high-tensile bearing means Surface black passivated ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Eye bolts acc. to DIN 444 with property class 8.8 for applications with high-tensile bearing means surface black passivated ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Item-no.: S05 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no. Other dimensions on request!
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Eye bolts acc. to DIN 444 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * not acc. to DIN 444 ** Item-no.: S01 0020 A0 ### 000 *** Item-no.: S01 0027 A0 500 000 Item-no.: S01 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no.
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Wedge sockets for open line construction, telecommunications and hang down the lightning hot-dip galvanized surface Can also be used for counter ropes and stretching wires. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. KK2 0203 00 000 148 KK2 0405 00 000 148 * out of standard ATTENTION: Depending on exploitation of tolerances, certain difficulties may occur upon assembly of 7,5mm diameter ropes. Please find certificates and instructions in our download area:
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SÜTHER & SCHÖN GMBH
Germany
Rope sockets formerly acc. to DIN 15315 but made of stainless steel, polished (material no.:1.4571/inox) ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. All dimensions similar to rope sockets for lifts acc. to DIN EN 13411-7. Please find instructions in our download area:
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 =Standard lengths of the threaded rods are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. L2 = Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and a threaded rod of 310 mm: KG1 0800 A0 310 SSN
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets acc. to DIN 43148 are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets acc. to DIN EN 13411-6 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 18 mm rope diameter and an eye bolts length of 800 mm: KK2 1800 A0 800 411
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with wedge sockets acc. to DIN 43148 The wedge sockets are not suitable for the use in areas liable to frost. ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 9 mm rope diameter and an eye bolts length of 800 mm: KK2 0912 A0 800 148
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with rope sockets acc. to DIN EN 13411-7 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * Spring buffers only without collar, similar to picture L2 = Standard lengths of eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspension type A for 8 mm rope diameter and an eye bolts length of 450 mm: SS1 0608 A0 450 315
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope suspensions with rope sockets acc. to DIN EN 13411-7 ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * upon request only L2 =Standard lengths of the eye bolts are in mm, further lengths possible When ordering, the required length of the eye bolts is to be incorporated into the item-no as per following example: rope suspensions type A for 8 mm rope diameter and an eye bolts length of 450 mm: SS1 0608 A0 450 315
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Wedge sockets in special design with screw galvanized surface With type testing similar to EN 13411-6 ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. material: G20Mn5N * material: GE240 ** material: GGG50 DIN 1693 *,** The standard design of these wedge sockets is not suitable for the use in areas liable to frost. Designs with a guaranteed impact test at lower temperatures are deliverable on request. Please find certificates and instructions in our download area:
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope sockets similar to DIN EN 13411-7 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Casted symmetric rope sockets: These symmetric rope sockets for rope end terminations are only to be used when subordinate demands are made. The fulfilment of requirements are to be checked combined with the rope, which shall be used with the rope socket, whenever legal and/or safety technical demands for these rope sockets are made. The rope sockets are not appropriate for ropes of more than 1770 N/mm² single wire strength. Please find certificates and instructions in our download area:
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Rope sockets for lifts acc. to DIN EN 13411-7 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. *cast design similar to DIN EN 13411-7 ** longer strap for a better assembly of ropes with a diameter of 24/25 mm Rope sockets acc. to DIN EN 13411-7 are not appropriate for ropes of more than 1770 N/mm² single wire strength Please find certificates and instructions in our download area:
Request for a quoteSÜTHER & SCHÖN GMBH
Germany
Wedge sockets according to DIN EN 13411-6 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. 1= pin with split-pin, please find further technical information under " accessories for wedge sockets". 2= threaded pin with counter-nut and split-pin, please find further technical information under " accessories for wedge sockets". * hot-dip galvanized surface ** yellow-galvanized surface (for a better distinction from similar parts acc. to DIN 43148, hot-dip galvanized, yet made from other material) *** longer strap for a better assembly of ropes Ø 31/32 mm Please find certificates and instructions in our download area:
Request for a quoteResults for
Wire ropes - Import exportNumber of results
44 ProductsCountries
Company type
Category