Results for
Poland
Triton-72 Alu Turn&Tilt Window TRITON is a system of aluminium profiles with thermal break design created to perform vestibules, bay windows, windows (fixed, swing, tilt, swing and tilt, tilt and slide) and entrance doors and other building envelope with a particularly high thermal insulation requirements. The system ensures a high standard of utility and aesthetics. It is used both in residential and public buildings (schools, offices, hospitals, banks, gas stations, etc.). The system allows you to mount glass fills, aluminium panels, sandwich fillings, and polycarbonate. Available in any RAL colour, powder painted, optional wood design.
Request for a quotePoland
With revolutionary Spidertechnology with thermal breaks made of ABS plastic, this system guarantees a results below 1.0 Uw W/m2K for windows. Profiles in this system are composed of the cellular insulation to block the movement of air, natural form, separated by the air chambers. Spidertechnology allows you to adjust the level of insulation to the specific requirements of the customer, without any complex system changes. To improve the insulation performance even further in addition to the spacers made Spidertechnology, it is possible to apply an optional multi-chamber seal made of EPDM as a central gasket. In addition, between the profile and the glazing, around the frame, you can also use tape PE foam insulation, thus reducing heat loss around the glazing. Technical drawing window system – Triton Planea is thermally enhanced with standard dividers and additional elements. Available in white, one-or-both-side covered, with film in colours with optional wood structure or design.
Request for a quotePoland
Hercules Alu Turn&Tilt Window Hercules is a system to produce doors, windows, and fixed sites composed of three-chamber high-quality aluminum profiles, differentiating with high thermal insulation and high stability. It is used both in residential and public buildings (schools, offices, hospitals, banks, gas stations, etc.). High stiffness provides external, third ventricle allowing to install an additional corner. Available in any RAL colour, powder painted, with optional wood design.
Request for a quoteBulgaria
SYNEGO profile system ensures a pleasant temperature .a high level of comfort and safety for your home provides up to 50% better therm insulation.this will significantly reduce heating cost .
Request for a quoteBulgaria
The best terms for construction projects accredited with Rehau quality standards, the Euro Design 70 is an economically efficient window system. Many designs possibilities using various shapes and colors.
Request for a quoteBulgaria
Door and window systems with a thermal barrier MB-70HI, MB-70US HI and a curtain wall based on the MB-70CW HI windows. Their construction is based on well-proven, well developed and highly appreciated base systems, i.e. MB-70, MB-70US i MB-70CW. Enhanced thermal insulation performance is achieved due to placing special insulating inserts in the central insulating chamber, formed by connecting aluminium profiles with thermal breaks. Thus formed inserts reduce heat transfer through this chamber due to low value of heat transfer coefficient. The central location of inserts additionally limits convection and thermal radiation.
Request for a quoteBulgaria
it is a very visually attractive and, at the same time, technologically advanced product, which due to its design solution and the rich diversity of colours for door fill, it can be , not only the functional and durable entrance into your home but also mark and decoration.
Request for a quoteBulgaria
The MB-Slimline window system with a thermal break and high thermal insulation performance features a very small width of aluminum profiles visible on the outside of the structure. The system meets all the requirements relating to energy saving and environmental protection.
Request for a quoteBulgaria
Hinged window system with a frame depth of 80mm Polyamide strip length 45mm Maximum glazing thickness 65mm
Request for a quoteBulgaria
MB-GLASS BARRIER-based external balustrades are used on upper floors with opening French doors or floor to ceiling full high windows as a safety element to prevent from falling. Additionally can also help to reduce noise coming from the outside. When attached to aluminium windows, they can perfectly fit their colour.
Request for a quoteBulgaria
The MB-104 Passive window system with a thermal break featuring very good thermal insulation properties meets all the requirements imposed on the elements used in passive buildings.
Request for a quoteTurkey
Building glass facade application, aluminium windows, glass railling, handrail
Request for a quotePoland
Number of chambers: 5-chamber frame Depth of installation: 70 mm Heat transfer coefficient: 1,0 Uw for Ug = 0,7 (ultimate frame)* Gaskets: 2 gaskets Glazing: till 41mm Security: two anti-burglar latches per sash Available cores colors: cream in mass, brown, anthracite, whiteTry architectur Guarantee: 5 years * Applies to 1230/1480 reference window. The Aluplast 4000 is one of our most versatile systems, ideal for modern single-family and multi-family housing, as well as renovation projects. Combining economy with standard solutions, the Aluplast 4000 defines practicality and reliability in contemporary architecture
Request for a quoteFrance
Bullseye level body stainless steel up to Ø14 mm, then aluminium. Sight window glass. Version Aluminium black anodised. Note Bubble levels are used as a type of zero indicator instrument for checking horizontal inclination in e.g. spirit levels, inclinometers, metrology instruments and machine constructions. Excellent bubble contour, with internal bubble ring to eliminate planar parallaxes. Sensitivity in angular minutes for 2 mm bubble travel Clear filling
Request for a quoteSpain
Advancement of the hydropneumatic disc. Protective housing with safety sensor. Cutting speed regulation. Cut at any desired angle between -45° and +45°. Cut right and left at fixed angles 0°, 15°, 22.5°, 30°, 45°. Movable miter that increases cutting capacity. Vertical and horizontal pneumatic clamps. Ø 420 mm cutting disc. Refrigeration system. OPTIONS Single-phase system. Dust extraction system
Request for a quoteSpain
Hydropneumatic cutting process. Safe cutting with double spring system and disc guard. Vertical and horizontal pneumatic clamps. Shock resistant cast iron bushing. Cut at any angle between -45º and +45º. Cutting speed adjustment according to the profile. Cut with fixed angle of 0o, 15o, 22.5o, 30o, 45o to the right and left. Ø 400 mm disc. Cooling system. OPTIONAL Roller road. Single-phase system.
Request for a quoteSpain
Length TTRM 1500 = 4050 mm Height TTRM 1500 = 2450 mm Width TTRM 1500 = 1260 mm Horizontal Cut TTRM1500 = 3000 mm Vertical Cut TTRM 1500 =1500 mm Length TTRM 2100 = 5050 mm Height TTRM 2100 = 3100 mm Width TTRM 2100 = 1460 mm Horizontal Cut TTRM 2100 = 4000 mm Vertical Cut TTRM 2100 = 2100 mm Cutting depth 90 mm Disc diameter 350 mm Voltage 230 / 400V – 50 Hz Power 3CV RPM 3000 OPTIONAL Support rollers Probe system for alucobom. Vertical digital display. Horizontal digital display.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Spain
X axis (Longitudinal) 2000 mm Y axis (Horizontal) 4000 mm Z axis (Vertical) – without milling 300 mm POSITIONING DISTANCES X axis (Longitudinal) 108m/dK Y axis (Horizontal) 108m/dK Z axis (Vertical) 10.5m/dK SPINDLE 7.5/9kW fan cooled spindle Maximum power 24000 rpm Maximum rotation speed ISO 30 Tool holders Electric fan TOOLS MAGAZINE Automatic umbrella type tool magazine system Maximum number of tools 10 Maximum disc diameter that can be loaded into the magazine system 150 mm Maximum dimensions of tools that can be loaded in the magazine system 140 mm Diameter / 120 mm Length Number of angled heads that can be loaded into the magazine system 2 OPERATIONAL AREA Vacuum table system with automatic zoning Vacuum table tube dimensions 269 mm * 2000 mm Number of externally controlled vacuum modules 7 X axis reference support 1 And axis reference support 4 Automatic tool length measurement Possibility of operation in two stations
Request for a quoteSpain
X axis (Longitudinal) 2000 mm Y axis (Horizontal) LEPUS II 4000 mm – LEPUS II L 7000 mm Z axis (Vertical) – without milling 200 mm POSITIONING DISTANCES X axis (Longitudinal) 55 m /dK Y axis (Horizontal) 55 m /dK Z axis (Vertical) 15 m /dK SPINDLE Spindle cooled by 4 fans Maximum power 2.2 kW Maximum rotation speed 18000 rpm ER20 tool holder CONTROL UNIT CNC control Remote network connection, data transfer via Ethernet and USB. OPERATIONAL AREA Dust and chip aspiration system Suction areas in independent spaces Externally controlled vacuum tables LAPUS II 6 – LAPUS II L 8 Automatic tool length measurement Possibility of doing double station processing X axis reference support Y axis reference support LEPUS II 4 – LEPUS II L 9 Metal fences closed on three sides that prevent access to the work area
Request for a quoteSpain
The PLC 3000 Folder is the ideal solution for those looking to fold aluminum sheet efficiently and accurately. With its ergonomic design and robust construction, this folder delivers exceptional performance in every operation. Thanks to its manual design, the PLC 3000 Folder gives the operator complete control over the folding process. Its ease of maneuver allows quick and precise adjustments, guaranteeing bends with constant and uniform radii on the 1.2 mm aluminum sheet. The PLC 3000 Folder is equipped with features that improve its performance and facilitate its use. Its sheet metal clamping system ensures a firm and stable fixation during folding, preventing slipping and ensuring consistent results. In addition, it has adjustable length stops, which allows folding with precise and repeatable measurements. These stops facilitate serial work and speed up the production process, saving time and increasing efficiency.
Request for a quoteSpain
It has a fixed 8-position tool changer and a carriage to which another tool changer can be attached, always with 8 positions. Thanks to its numerous versions, 1500×3000, 1650×4000, 1650×6000, 2000x 4000 and 2000×8000, the PWI has found various applications in the industrial sector, for example in plastics, aluminum and agglomerates in general. Special versions can be supplied for milling and threading steel profiles and/or bars. PWI offers a wide Z to hold i supports and to hold particular profiles. In its complete version with clamps, it allows alternating compounds and profiles, in order to optimize the machine for different applications in a single work environment. This machine is usually chosen for its versatility and speed, with an interpolation of up to 40 m/min. In this case, CADCAM ITALMAC provides this version of CNC with all the DXF and geometric figure import tools, so that the PWI is recognizable compared to other similar machines.
Request for a quoteSpain
Vertical CNC woodworking machines with closed table. Vertical CNC machines with three, four and five controlled axes equipped with a fixed Bakelite work table. Suitable for any type of processing, recommended for those who work a lot of panels, since the closed top technology allows both suction cup and nesting operations
Request for a quoteSpain
Three, four and five controlled axis configurations Bakelite work surface Extreme versatility to adapt to different materials such as PVC and plexiglass Working ranges: 3500×1600 – 2000 mm, 5000×1600 – 2000 mm, 6000×1600 – 2000 mm Work areas divided into 6/8/10 vacuum zones, automatically activated by the software according to the dimensions of the processed panels Benefits: Speed and precision in CNC machining of aluminum panels Greater comfort and productivity for operators Significant space savings compared to horizontal machines Versatility to work with a wide range of materials
Request for a quoteSpain
Fixed Bakelite work table: Robust and resistant, ideal for demanding jobs. Closed table technology: Allows both suction cup and nesting operations, optimizing your workflow. Controlled axes: Three, four or five axes for greater precision and flexibility in your projects. Suitable for any type of processing: Perfect for cutting, milling, drilling and much more. Ideal for working with panels Horizontal CNC machines with a closed table are especially recommended for those working with wooden panels, as the closed top technology allows for safe and precise clamping using suction cups or sockets.
Request for a quoteSpain
Special aluminum alloy body honed with long-lasting electrostatic paint. Special legs to avoid vibration. Great versatility and easy handling. Upper front template with double copy. The pocketing of any figure can be through without needing to change the machining face. Engine power: 1.5 HP 220/380 V Spindle speed: 15,350 rpm Fresolin diameters: d=5mm D=8mm Milling capacity: 255 x 110 x 130 mm. (X AND Z) Fresolin Ø 5 mm. (1 piece) Service keys Lubrication system Measurement stop equipment OPTIONAL Special copy template
Request for a quoteSpain
Copying equipment for high production. Vertical and horizontal pneumatic clamps. It consists of 3 motors that can be activated according to the machining needs. Works on 3 faces of the profile in the same cycle without having to rotate the piece. 5 mm Fresolin. Oversized profile supports arm on both sides. OPTIONS Special copy templates. Single-phase system. 8 mm Fresolin.
Request for a quoteSpain
Multi-channel grooving – regardless of the copying system – with the help of supports. Pneumatic clamps. Cremone with 3 drill, bits for steel reinforcement in PVC. 5mm copy milling cutter. Profile support. OPTIONAL Single-phase system. 8mm copy milling cutter. Refrigeration system.
Request for a quoteSpain
copy system Drainage system with independent motors Triple bit cremone system Includes profile support. Options Milling for 8 mm Single phase system Milled cooling system
Request for a quoteSpain
The M100 copier is a necessary tool for every carpentry professional looking for quality results in their work. It has an adjustable cutting guide and a powerful motor, thanks to which you can make detailed and precise copies in wood and other materials. In addition, thanks to its compact and robust design, it is easy to transport and resistant to wear. Technical characteristics: Motor power: 1.1 kW Motor rotation speed: 12,000 RPM Maximum milling height: 100 mm Maximum milling length: 280 mm Weight: 90kg
Request for a quoteResults for
Windows- aluminium - Import exportNumber of results
112 ProductsCountries
Company type
Category