Welding machines - Import export

Advanced inverter technology for superior TIG DC performance. Industrial TIG welder for difficult conditions. The fully functional and user-friendly control panel, with graphical and numeric display, makes it easy to set all welding parameters. Robust construction: electrical safety (IP23S), protected printed circuit boards and optimal airflow reduce contamination to extend equipment life in the harshest environmental conditions. TIG HF and Lift ignition meets all requirements. Perfect start of the TIG HF with pre-defined start mode. Complete configuration of TIG parameters: Pulse TIG with variable frequency that allows the welder to adjust the arc focus according to applications, 10 memory positions for personalized welding settings, TIG spot welding. Water coolers and carts available What's included: Input cable (2m) Gas connection kit

TIG welding machine that combines robust industrial construction with excellent arc . Excellent arc performance - perfect HF ignition, stable, focused and fast arc (for pulsed and non-pulsed arc). Simple control panel - full control, easy configuration. Energy efficiency - PFC circuit, high efficiency, green mode. Portable - Small, lightweight PFC, 16A protection, 100m input cable, prepared for generator.

Bester 305C welding machine Lincoln AR/CO2 Regulator/ Flowmeter 30L LE Lincoln Electric LGS3 250 G MIG Torch - Air Cooled - 4M Lincoln Electric 305C It is truly a multi-purpose model, ideal for thin sheet and lightweight applications for medium fabrication work. Powerful and compact, excellent for MIG welding The Powertec 305C was designed around the need to satisfy our customers' demand for robust and robust compact MIG welders. Built as a truly multipurpose model, ideal for both thin sheet metal applications and light to medium construction work. Excellent starting performance. Multi-step voltage knobs for precise adjustment. Excellent drive system with transmission roller Electronic feedback system in the wire drive guarantees a constant wire feed speed. Equipped with large diameter wheels, push/pull bar and lifting eyes for total maneuverability. Meets IEC974-1, ROHS and CE standards for safety and reliability.

SMART, COMPACT MULTI-PROCESS Lincoln Electric's Weld Pak 2000 is a complete multi-process continuous voltage arc welding machine ideal for welding thin sheets and repair and maintenance work. This machine is a perfect tool for light steel applications and is mobile, meaning the operator can easily move this MIG welding machine to any location in the workshop. Weld Pak 2000 is recommended for MIG/MAG applications, for arc welding with Innershield gas-free flux-cored core and applications with Rutile and Basic electrodes. This machine is designed to feed wire from 0.6 mm to 1.1 mm (steel, stainless steel and flux cored) on B300 and S200 coils. High quality welding performance that depends on a quality wire drive system. Lincoln Electric has equipped the Weld PAK with a professional feeder with large rollers. The Weld Pak 2000 is designed to meet Lincoln performance and reliability standards. : Compact design with a standard

If you want to explore MIG welding, Lincoln Electric's Handy MIG® machine is your ideal solution. Designed for flexibility and simplicity, this MIG welding machine is notable for its portability and ease of use, connecting to a 230V, 20 amp power source. Equipped with four voltage settings and a system for continuously adjusting the wire feed speed, the Handy MIG® is capable of welding mild steel from thin thicknesses up to 3.2 mm. The equipment is supplied almost ready to use, including almost all the accessories necessary to start MIG welding: a torch with mounted cable, an earth cable with clamp, a gas nozzle, a gas regulator with hose, a wire coil solid, contact tips, and a protective mask with filter plate and lens. You just need to add a shielding gas cylinder. Additionally, it includes a coil of self-shielded flux-cored wire, additional contact tips and a hammer with cleaning brush, expanding the functionality of the Handy MIG® for welding with and without gas.

The Invertec 150S is suitable for a variety of applications and working environments. Its design was focused on providing excellent welding and starting behavior in a robust and reliable package. It is equipped with a unique set of features and capabilities to ensure perfect welding for your application. Robust and robust on the one hand, portable on the other, the Invertec 150S is light and easy to handle in any situation. Rugged Design – Unique rubber corners, metal casing and control buttons to withstand harsh environmental conditions. Premium Arch – Lincoln 's advanced technology and know-how guarantee performance every time. Power Surplus – Additional power for superior arc control. Soft and Crisp Mode – Selectable arc modes for different electrode types Self-adaptive arc force – For a stable arc with low spatter levels as standard. Integrated “Hot Start” for stable arc with lower splash level. Long cables: primary power extension cables up to 60 m.

The Invertec® 165S and SX welders offer much more than you would expect from a welder of this size. They have all the power of a heavy-duty professional welder that you can take to the most demanding job sites. Low energy consumption and high duty cycle: they are ideal for maintenance and for all professional, industrial or construction site applications. Exceptional performance: high duty cycle at 40°C. Easy to use: Hot Start function to improve arc strike and Arc Force function to prevent electrode sticking. Versatile: welding with any coated electrode (except cellulosic) Compatible with motor-generator. Light: less than 9 kg Practical: thanks to the practical carrying strap.

Discover the BesterMIG 200-S Inverter, a technological innovation that will radically change your approach to welding. Synergy technology transforms welding by automatically adjusting parameters . With Synergy, the difficulties of determining the ideal current, wire feed speed and correct material thickness are a thing of the past. This adaptive technology assists your welding needs, ensuring remarkable results with minimal effort. By reducing the margin for error, Synergy offers high quality welds with reduced costs. Increase your efficiency and productivity with automatic adjustments that save time and facilitate the welding process. Portable and compact multi-process equipment: MIG/MAG, FCAW, MMA and TIG Lift. Equipped with SYNERGY based on automatic selection of welding parameters Perfect solution for hobbyists and DIY enthusiasts: makes welding faster and more effective

Light, compact and easy to transport machine, it has an Anti-Stick function that prevents the electrode from sticking. Continuous dimming simplifies the current setup process. It is a powerful machine and can be used with electrodes between 1.6 - 4 mm. It works in a regulation field between 10 - 160 A. Its features also include: Hot Start (Reduces the risk of sticking when the electrode and workpiece are cold, also facilitates preparation and penetration) Arc Force (keeps constant intensity regardless of arc length).

Input current at nominal output kW to duty cycle - 1.7 kW at 100% - 2.4 kW at 60% - 4.0 kW at 25% Input voltage 230 V 15% single phase Frequency 50/60Hz Welding current range 10-150A** Maximum open circuit voltage 90 Vdc Fuse (delayed action) or Circuit Breaker (characteristic D) AmP. 16A Input current cable 3 x 1.5mm2 Plug type (included with the machine) 16A / 250V Height x Width x Length (mm) 205 x 130 x 300 Weight (kg) 4.2 Type of metals able to weld: Steel cast iron stainless steel

Processes: MIG/MAG Materials: Carbon steel – Stainless – Aluminum Applications: Metal carpentry and boilermaking – Shipyards – Construction of equipment and machinery – Nuclear Petrochemistry – Automobile and Railway Industry – Maintenance – Mechanical workshops – Repairs

Stick Electrode, fluxes, solid wires, SAW wires, flux-Cored wires, welding Processes and Machines.

The automatic welding machine P2 is the innovative successor of the successful P models and an efficient and manoeuvrable device for welding truck tarpaulins, tents, awning materials and advertising banners. It produces optionally 20, 30, 40 and 45 mm wide overlap welds and may also be converted for welding in welting ropes. In addition, by mounting hem welding accessories, the automatic machine can without any difficulty be used for the production of 20 mm, 30 mm, 40 mm and 45 mm hems. The heat output of up to 4000 W 230 V AC is infinitely variable from 20 to 700 °C for an individual adjustment to different materials. The P2 starts automatically after the weld head has been swivelled in. In addition, the infinitely variable speed adjustment of the modern generation of motors with their performance of up to 18 m/min., in conjunction with the holding down device for crease free welding, makes for an optimum welding result.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

Advantages of Laser welding: High welding speed (1-10 m/min). Welding without edges grooving. Minimal warp distortions. Minimal heat-affected zone. Applicable for welding of wide variety of materials. Welding process versatility. Possibility of automatization. Energy and wire saving. Comfortable labor conditions, working area maintained clean. Readme! Laser welding has a special property – it forms a high-density welding joint. Porosity and other defects that are inhere in other welding methods, are absent using this technology.

The SWIFT K33 is one of the high-end core-to-core optical welders, perfectly adapted to the Job of the installation. With a large 5-inch touch screen and a high-performance oven, it allows fiber connections in less than 20 seconds (weld + oven). It is compatible with the majority of 250 µm and 900 µm fibers, and pigtails and is also compatible with SOC connectors

with 6kW fiber laser and MP Flex loading and unloading for sale in top condition. C0z3xdk3ol

High-Performance Plasma Cutting Machine: Built to handle harsh environmental conditions, suitable for on-site operations with a generator or in a workshop environment. Starting: Innovative and advanced arc starting without HF. Performance: Innovative and advanced electrode and nozzle design. Longer Lifespan: Innovative and advanced design increases the life of consumables. Faster: higher travel speeds and sheet thickness. Flexible: multiple torch configurations and different materials: carbon steel, stainless steel, aluminum and many more. Concentrated plasma flow: less heat input, less distortion. What's included: 2 m input cable 7.5m manual cutting torch Earth and cable clamp Air Connection Kit Cutting Torch Consumables Kit

High-Performance Plasma Cutting Machine: Built to handle harsh environmental conditions, suitable for on-site operations with a generator or in a workshop environment. Starting: Innovative and advanced arc starting without HF. Performance: Innovative and advanced electrode and nozzle design. Longer Lifespan: Innovative and advanced design increases the life of consumables. Faster: higher travel speeds and sheet thickness. Flexible: multiple torch configurations. Different materials: carbon steel, stainless steel, aluminum and many more. Concentrated plasma flow: less heat input, less distortion.

The Plasma PC-210 is the most flexible plasma cutting machine you can consider. The device is ready to use and is capable of cutting quickly and accurately. Powered by a standard 230V power supply, the machine is ideal for working on site. With PC-210 cutting, it no longer has to be a problem, forget the angle grinder, grab the torch and cut in seconds. This inverter machine is equipped with an integrated air compressor. This provides maximum flexibility without the need for a separate compressed air source. And with a weight of just 18 kg combined with its small size, this versatile machine can be used anywhere, anytime.

Powerful and compact, great for MIG welding The Powertec 305C was designed around the need to satisfy our customers' demand for robust and robust compact MIG welders. Built as a true all-rounder, ideal for both thin sheet metal applications and light to medium construction work . Excellent start-up performance. Multi-step voltage knobs for precise adjustment. Excellent drive system with transmission roller Electronic feedback system on the wire drive ensures a constant wire feed speed. Equipped with large diameter wheels, push/pull bar and lifting eyes for total manoeuvrability. Meets IEC974-1, ROHS and CE standards for safety and reliability.

The Bester 215MP represents the latest generation of multiprocess machines. Compact, single-phase, based on state-of-the-art inverters. They can be used in many different applications and can be easily moved around the premises or transported to any location effortlessly. These units can be powered from the mains or by generators. Suitable for use with large coil wire (300mm or 200mm). This is a Ready-Pack that contains a 4m MIG gun, earth cable with clamp, gas hose and 0.8-1.0 solid wire rolls. Equipped with wheels and shelf for a gas cylinder. Excellent choice for MIG, TIG lift and MMA welding Compact and robust single-phase inverter Large digital screens and friendly user interface Suitable for use with generators Easy polarity change what is included MIG Gun (4m) Earth cable (3m) Gas hose (2m) Rolls for solid wire 0.6-0.8-1.0 USB with user manual

It is a type of machine that is light, compact and easy to transport, it has the Anti-Stick function that prevents the electrode from sticking. Continuous dimming simplifies the current setup process. Furthermore, it is a powerful machine and can be used with electrodes between 1.6 - 4 mm. It works in a regulation field between 10 - 160 A. Its features also include: Hot Start (reduces the risk of sticking when the electrode and workpiece are cold, also facilitates priming and penetration) and Arc Force (keeps the intensity constant regardless of the arc length).

The EDGE CNC Contouring Center is a compact controlled horizontal center capable of PVC profile milling and splicing. PVC profiles can be coated in white or standard or even coated with aluminum, copper, wood, acrylic, fabric, fiberglass, etc... The rotation speed of the axes can be adjusted from 500 to 24000 rpm through a variable frequency inverter. The control allows interpolation managed by numerical control of the X and Y axes. The movement of the X and Y axes is produced through brushless motors and recirculating ball screws, the Z axis uses a brushless motor on a helical rack. The machine is completed with four double-acting pneumatic jaws to block the piece.

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

The PFAFF 8301 uniquely combines all the physical advantages of ultrasonic welding with the whole range of technological sewing experience. On the PFAFF 8301 the workpiece is held between the sonotrode and the anvil wheel and welded continuously under pressure. When welding continuously by the ultrasonic method, the material to be welded will be subjected to rapid chan- ging pressure vibrations. The heat develops because of molecular vibrations beneath the material surface, for thin materials within the immediate vicinity of the actual weld.

Used Milling Machinery Glomacht has an variety of woodworking machinery that will help you perform workshop.Willing to sell or buy used or new industrial machinery? Share your power and let GLOMACHT get in charge of everything. For more info, please contact us: contact@glomacht.com

Used Milling Machinery Glomacht has an variety of woodworking machinery that will help you perform workshop.Willing to sell or buy used or new industrial machinery? Share your power and let GLOMACHT get in charge of everything. For more info, please contact us: contact@glomacht.com

Used Drilling Machinery Glomacht has an variety of woodworking machinery that will help you perform workshop.Willing to sell or buy used or new industrial machinery? Share your power and let GLOMACHT get in charge of everything. For more info, please contact us: contact@glomacht.com