Water cleaning - Import export

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.

Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.

Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request

Softening mask for sensitive and blotchy skin, based on azulene, chamomile extracts, jojoba oil, wheat germ oil and allantoin. As soon as it is applied, this creamy mask nourishes, firms and strengthens sensitive skin. Use: on cleansed skin, apply a thick layer on the face and neck and leave for 15 to 20 minutes. Clean with lukewarm water using a Lisine sponge.

* Adopts fully automatic PLC computer control system, which has faster operation speed, lower failure rate, and can be upgraded remotely. * Adopts thickened hot dipped galvanized steel material, sturdy and durable. * 5 brushes (1 vertical lift top brush + 2 small vertical brushes + 2 large vertical brushes). * Strong water cleaning system and foam pump system. * Multiple functions: water washing-----foam-----brushing-----wax water washing. * With fault identification code, the fault is easy to identify and eliminate.

The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue

The hygienic stainless steel quarter turn lock prevents bacterial attack and fulfils the strict regulations of testing principles for foodstuff machinery and hygien. The well concieved geometric form, the mirror polished stainless steel surface and the central circumferential seal reliably prevent dirt accumulation. Water, cleaning agents etc. can drain off fully and so prevent contamination. Especially in processes where the resistance of the seal to cleaning and disinfection agents is very important, optimised control cabinets, terminal boxes and command panels are a must. Specifically designed after the principles of Hygienic DESIGN, the hygienic quarter turn lock HD fulfils the strict regulations of the foodstuff processing industry and passes therefore optimally in their professional hygienic applications. The special seal is suitable for high pressure washing up to max. 100 bar and fulfils IP65/67. Furthermore, the seal is temperature stable up to 80°C and the blue

Cortec VpCI® 415 is a potent, water-based degreaser and corrosion inhibitor. It expertly cleans and safeguards metal surfaces.This versatile solution merges powerful degreasing with Cortec's advanced VpCI® technology for long-lasting protection.It swiftly removes grease, oil, and grime from various metal surfaces, leaving a clean finish.Ideal for machinery, parts, and surface prep, it also combats rust and scale. Beyond cleaning, VpCI® 415 offers exceptional corrosion resistance.Its protective film guards against rust, oxidation, and galvanic corrosion.VpCI® vapours reach all surfaces, eliminating the need for extra protection methods.Eco-friendly and non-toxic, it's free from harmful chemicals.Apply by dipping, spraying, or wiping.Dilute as needed. For cleaning, let it dwell 2-5 minutes, then rinse.For protection, let it dry.Enjoy effective degreasing, lasting corrosion prevention, and a water-based, eco-friendly formula.

Floral water from Thyme (Thymus vulgaris) 200 ml. Floral water - Thyme hydrolate (Thymus vulgaris), also known as Thyme flower water, is produced by steam distillation of thyme flowers and leaves. Thyme is an herb with many benefits and is traditionally used for its antiseptic and antibacterial properties. PROPERTIES: disinfectant, antiparasitic, fungicidal, stimulating, tonic. Properties of Thyme Floral Water: 1. Antiseptic properties: Thyme is known for its antiseptic and anti-inflammatory properties, which can be beneficial for the skin. 2. Toning action: Thyme floral water can be used as a tonic for the skin, helping to tone and refresh it. 3. Aroma: It has a characteristic Thyme aroma that is fresh and herbal. 4. Calming effect: Can help calm and relax when used in aromatherapy. How to use Thyme floral water: 1. Facial toner: Dampen a cotton pad with the thyme floral water and clean your face after cleansing to improve skin tone.

The Recycled Rapido is a short-use mop produced from 100% recycled materials and is even recyclable itself. The pad consists entirely of rPET, for which PET bottles are collected, cleaned and crushed. The remaining fibres are melted and processed into rPET chips. These are in turn spun into rPET yarn. By using rPET, we are drastically reducing CO2 emissions from the manufacturing process. This saves energy, raw materials and fuels. Features - Recyclable and made of 100% rPET (recycled polyester) - Easy to attach to frames with velcro - For short-term use: can be washed up to 10 times in the machine at max. 60°C or to be thrown away after use Use - For efficient cleaning of hospital rooms, doctors’ practices, hotel bathrooms, laboratories, offices, care centres,... - Works perfectly dry, but also with water, cleaning or disinfecting products - Fits our 40 cm aluminium mop frames

Works on water pressure No electricity or compressed air needed • Are connected to a water supply and automatically dilute a cleaning product with water. • Perfect for spraying cleaning products on cars, trucks and other vehicles. • Spray lance in stainless steel. Equipped with a fanjet nozzle. • The correct dilution is set based on a set of coloured measuring tips. • 16 different dilutions may be set between 0.5 % and 12 %. • Quick coupling between gun and hose. • Operating pressure between 2 and 6 bar. 801.000.100 - 10 m hose – lance 60 cm 801.000.200 - 15 m hose – lance 60 cm 801.000.300 - 25 m hose – lance 90 cm 801.000.302 - 25 m hose + telescopic lance 2 x 1 m 801.000.120 - 10 m hose – lance 60 cm and backflow preventer CA 801.000.220 - 15 m hose – lance 60 cm and backflow preventer CA 801.000.320 - 25 m hose – lance 90 cm and backflow preventer CA 801.000.322 - 25 m hose + telescopic lance 2 x 1 m and backflow preventer CA

Thanks to the anti-hair brush, you can easily rid your house or car of (pet) hairs! The handy brush has soft rubber bristles and removes pet hairs from cars, carpets and other textile upholstery in just a few wipes. Simply sweep the hairs together with the brush and vacuum them up with the hoover. After use, rinse the brush under running water to clean it. Your cat or dog will also be a fan: the soft brush can be used to comb your pets’ fur and give them a relaxing massage.

The ZAPA+ is a water feed handle that is simply filled with water or cleaning agent. When you press the handle at the top, the ZAPA+ sprays a precise amount of fluid on the floor. In combination with the double-sided Velcro pad (ref. 460.370.000) and the disposable BJ-ONE mops, the ZAPA+ is ideal for cleaning small and medium-sized spaces. Compared with normal textiles, cleaning costs are reduced with less risk of crosscontamination. Also compatible with our microfibre mops. Fields of application: - Hospitals, nursing homes, medical centres, crèches - Food service, industry, kitchens - Cleaning companies

ClearPore depth filters are a range of high efficiency melt blown depth filters available in a range of materials to ensure particulate removal from liquids when there is a wide side range of particulate contamination. ClearPore filters are manufactured from either 100% polypropylene or nylon fibers to create graded density and high contamination holding capacity. The range are available in a range of absolute or nominal removal ratings. Products are manufactured from FDA approved materials and conform to all required EU guidance of food safety. ClearPore depth filters are used in a range of industrial and F&B applications, such as bulk chemicals, industrial water treatment, cooling water, plating, parts cleaning, drinking water treatment, desalination and food & beverage applications requiring haze or colloidal removal

This protection set BC-SET-01 of the company Schönwolf is especially developed for cleaning and water work BC-SET-01 consists of following parts: 1x protective suit (SS20) of Cat. III with hood of PVC 1x pair of gloves of nitrile 1x pair rubber boots 1x safety helmet 1x safety mask (folding, helmet-attachment) 1x goggles Delivered in a fabric bag for easy transport!