Vibration measurement - Import export

The low-cost High Temperature ICP®/ IEPE accelerometer, model HT602D01, is ideal for vibration measurements in higher temperature applications, including the paper, plastics and steel industries. These high temperature ceramic shear ICP® accelerometers feature a 2-pin MIL-C-5015 side-exit connector in a low-profile package. They can be used in environments with temperatures up to +325°F/+163°C. The sensing element of these accelerometers provides a sensitivity of (±10%) 100 mV/g (10.2 mV/(m/s²)) with a frequency range of (±3dB) 30 to 480000 cpm (0.5 to 8000 Hz). — Industrial ICP® vibration sensor — Continuous operating temperature up to 163 °C — With through hole — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.8 ... 8,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on the side Please contact us directly for an individual offer.

When using vibration transmitters, the vibration evaluation and the fault switch-off are outsourced, i.e. the alarm thresholds are parameterised in a separate evaluation unit or in a PLC that can record the trend development. Transmitters are current loop powered and output a normalised current signal corresponding to the vibration, which is then scaled in the system controller. The vibration transmitters of the 64x series are available with different measuring ranges and quantities (vibration velocity according to ISO 10816, vibration acceleration and vibration displacement, among others) that are related to the respective application. — Vibration transmitter with current output corresponding to the peak value of the vibration velocity — Measuring range 0 ... 12.7 mm/s — Output range 4 ... 20 mA — Frequency range 3 ... 1,000 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

Current loop powered vibration transmitters enable cost-effective and permanent monitoring of machine vibrations. They provide a standardised 4 ... 20 mA output signal, which is proportional to the RMS or peak value of the measured vibration amplitude. The transmitters are connected to existing, free inputs of a PLC or a process control system. These then issue a warning message when a preset vibration level is exceeded or switch off the machine in an emergency. — Measuring range 0 ... 25.4 mm/s — Output range 4 ... 20 mA — Frequency range 3 ... 1,000 Hz — 2-pin connection socket on top. For an individual offer, please contact us directly.

Cost-effective industrial ICP®/ IEPE accelerometers are ideal for fixed installations and use in continuous on-line monitoring systems. This improves safety when installed in hazardous or inaccessible locations. Connection can be made via switches or junction boxes for route-based data acquisition systems. The Model 601A01 is suitable as a low-cost industrial ICP®/ IEPE accelerometer for a general purpose. It has a very good signal-to-noise ratio and a ceramic sensing element. The low-cost ICP®/ IEPE accelerometers have an economical design and are ideal for fixed mounting. Their rugged stainless steel housing with hermetic sealing and housing-isolated electronics, eliminate noise problems. — Industrial ICP® vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.27 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top For an individual offer, please contact us directly.

The 603C01 ICP® is one model in a very diverse line of 603-Series accelerometers. The 603-Series includes alternative sensitivity models, hazardous area approved models, dual output models and models with an integral cable. For monitoring systems with many input channels, robustness, reliability and a favourable sensor price are of great importance. Low-cost sensors with ICP®/IEPE technology are used when a large number of measuring points are to be continuously monitored and an evaluation of the vibration spectrum is required. is required. — Industrial ICP®/IEPE vibration sensor — Measuring range 50 g — Sensitivity 100 mV/g — Frequency range 0.5 ... 10,000 Hz — Single-point calibration at 100 Hz — 2-pin connection socket on top — With metric (M) or inch mounting bolt If you have any further questions about this sensor model, please do not hesitate to contact us. We will be pleased to help you.

We supply from our existing stock Kalefeld elprom- aluminium flameproof motors / hazardous motors Ex de IIC T4 in frame size 56 - 132 ( 2- and 4- poles ) 0, 12 - 1 1 kW . All motors on stock are with Ptc thermistors and fixed bearing . Other frame sizes and versions are available within 4-5 weeks after receipt of order . Special applications Mechanical variants Protection IP56, IP65, IP66 Special flanges and shafts Without terminal box Uni-directional bearings, locked bearings or special bearings Terminal box on side SPM-vibrations measurement

RAEL, founded in Genoa in 1969 as a electric motors repair and rewinding company, has become an established name in project and production of electric motors for potentially explosive atmosphere. Since 1986 the company grew considerably and moved itself to Predosa where both production and offices are actually located. We supply from our existing stock Kalefeld RAEL- aluminium flameproof motors / hazardous motors Ex de IIC T4 in frame size 56 - 132 ( 2- and 4- poles ) 0, 12 - 1 1 kW . All motors on stock are with Ptc thermistors and fixed bearing . Other frame sizes and versions are available within 4-5 weeks after receipt of order . Special applications Mechanical variants Protection IP56, IP65, IP66 Special flanges and shafts Without terminal box Uni-directional bearings, locked bearings or special bearings Terminal box on side SPM-vibrations measurement

Cemp offers custom-made solutions. The main customers are the chemicals industry, pharmaceutical industry, power plants and minings. Further fields of application are the on-shore- and off-shore plants as well as the shipbuilding industry. The name Cemp stands everywhere for guaranteed security against explosion of dangerous dusts and gasses . We supply from our existing stock Kalefeld cemp- flameproof motors / hazardous motors Exd(de) IIC T4 in frame size 63, 2-poles up to frame size 160, 2-poles (0,18 – 18,5 kW) and frame size 63, 4-poles up to frame size 180, 4-poles (0,12 – 22 kW). All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 2 -8 weeks after receipt of order . Cemp Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Special applikations Mechanical variants Protection IP56, IP65, IP66 Special flanges and shafts Without terminal box Uni-directional bearings, locked bearings or special bearings SPM-vibrations measurement Electrical variants Special voltage and frequency Heaters Bimetallic thermal protection (NC, NO), thermistor (PTC), platinum resistor (PT100) Single-phase with permanent capacitor Single-phase with centrifugal switch Accessories Forced ventilation (IC416) Encoder 100 - 10000ppr Bearing sensor Breaks D.C. disk brake A.C. disk brake Hand release of brake Reverse braking function (braking when energized - frame size 63-100)