Used motors - Import export

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Our vibration motors are manufactured using top-quality metals, such as a special blend of aluminium injection and ductile ggg 40 cast iron, in an IP66 protection standard. They offer various speed, frequency, and voltage options for maximum efficiency. We conduct thorough analyses, tests, and research and development studies before and after casting to produce premium-quality products. Vibration motors are a type of motor that generate vibrations using electrical or pneumatic energy. Vibration motors are utilized in various industrial machines that require vibration energy such as food and flour factories, construction, subways, motorways, hydro power plants, forced water tunnels, steel mills, concrete factories producing prefabricated elements, mining, and asphalt and cement plants. Additionally, they are employed in the operation of sand dewatering machines, recycling plants, steel and similar silos, feeders, sieves, vibratory discharge channels, compaction and flow processes.

Seel version trivalent blue passivated. Stainless steel version bright. Note: The spherical washer levelling set is used to mount and align motors, aggregates, drive units and production lines. The spherical washer gives exact alignment of sloping faces with an inclination of up to 4°. The locknut secures a prescribed adjustment. Accessory: Spherical levelling washers 07460

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

HEW RUF 71L/2 three-phase motor SN:0833647 ,used, small traces of use, 100% functional, scope of delivery according to photos B99ciglw0q

The EDGE CNC Contouring Center is a compact controlled horizontal center capable of PVC profile milling and splicing. PVC profiles can be coated in white or standard or even coated with aluminum, copper, wood, acrylic, fabric, fiberglass, etc... The rotation speed of the axes can be adjusted from 500 to 24000 rpm through a variable frequency inverter. The control allows interpolation managed by numerical control of the X and Y axes. The movement of the X and Y axes is produced through brushless motors and recirculating ball screws, the Z axis uses a brushless motor on a helical rack. The machine is completed with four double-acting pneumatic jaws to block the piece.

Product Features: • The MIF range are single phase multi-stage filters offering very high performance, designed for use in a variety of industrial applications. • Single phase, 250V, these filters allow compliance with industrial and residential limits when screened motor cable is used. • Typical applications include motor inverter drives with long (above 50M) motor cable. • The MIF range of filters are compact and cost-effective and offer flexibility in mounting options ensuring minimal panel space solutions. Current ratings from 3 Amps to 23 Amps. • All products are RoHS compliant and approvals held include UL and cUL.

Product Features: • The MDF3 three phase drive filters are suitable for inverter / servo drives and high noise environments. • The MDF3 range of three phase high performance industrial filters are available in 8 current ratings, from 8 Amps to 150 Amps at three phase 440V, and have stud termination. • Primarily designed for use with motor drive inverters they are suitable for all applications without a neutral conductor where leakage current is not a limiting factor i.e. permanently wired-in equipment (3 wire systems). • All products are RoHS compliant and approvals held include UL and cUL.

Product Features: • Used (with 150 Volt full scale A.C. voltmeters) to measure the voltage of 240, 480 or 600 VAC systems. • Primary insulated for 4.0 KV rms test, suitable for L.V. switchgear and motor control use. • 50/60 Hz. operation. • Open construction - "Type H". • CSA certified (209651). • The nominal line voltages of 240 and 480 volts may be exceeded by 25% for 60 Hz. operation. • Insulation system 55°C rise, Class 105.

A cost effective heat shrink tube for general insulation and for use in hermetic electric motors. It can be supplied in different lengths and wall thicknesses to suit the application in hand. It provides comprehensive mechanical and electrical protection. Shrink Ratio 30 35% Operating Temperature range 130°C to 155°C

The Microchip ATXMEGA32A4-AU microcontroller is suitable for a wide range of applications, including automotive, industrial, consumer, and medical. It can be used for motor control, power management, data acquisition, and communication applications.

The Infineon IR2113STRPBF is a high and low side gate driver IC designed for use in motor control applications. It features a 25 ns rise time and a 35 ns fall time, and can handle up to 2.5 A of current. The device is available in a reel package for easy integration into production lines

The AD5679BCPZ-1 is a Digital to Analog Converter (DAC) from Analog Devices. It is a string DAC with SPI and DSP interfaces, and is designed to operate over a temperature range of -40°C to 125°C. It features nanoDAC+® technology, which provides fast settling time of 8µs. Features: • String DAC with SPI and DSP interfaces • Operating temperature range of -40°C to 125°C • nanoDAC+® technology for fast settling time of 8µs • Low power consumption • High accuracy and linearity • Low noise • Wide supply voltage range Applications: The AD5679BCPZ-1 is suitable for a wide range of applications, including industrial, automotive, and consumer electronics. It can be used in motor control, power management, audio and video processing, and instrumentation. It is also suitable for use in medical and military applications.

The Microchip Technology PIC18F67K22-I/MR microcontroller is a 8-bit device with 32K x 14 Flash program memory, 3 kB Data RAM, 1K x 8 EEPROM, and 28 I/O pins. It has an operating voltage range of 1.8 V to 5.5 V and an operating temperature range of -40 C. It features 11 Timers, 4 PWM channels, 10-bit ADC resolution, and I2C, SPI, and UART interfaces. The PIC18F67K22-I/MR microcontroller is suitable for a wide range of applications, including automotive, industrial, medical, and consumer electronics. It can be used for motor control, power management, data acquisition, and communication. It is also suitable for embedded systems, such as home automation, security systems, and robotics.

The Microchip PIC16F627A-I/ML is a 28-VQFN Exposed Pad SMD/SMT microcontroller with a PIC core processor, FLASH program memory, and SRAM data RAM type. It operates on a supply voltage of 3 V to 5.5 V and has a maximum operating temperature of + 85 C. Features: -PIC core processor -FLASH program memory -SRAM data RAM type -Supply voltage of 3 V to 5.5 V -28-VQFN Exposed Pad SMD/SMT package -Maximum operating temperature of + 85 C -Operating temperature range of - 40 C to + 85 C Applications: The Microchip PIC16F627A-I/ML microcontroller is suitable for a wide range of applications, including automotive, industrial, medical, and consumer electronics. It can be used for motor control, data acquisition, and signal processing.

The PIC18F8527-I/PT is a 8-bit microcontroller from Microchip Technology. It is based on the PIC18F core and features 48KB of Flash memory, 24K x 16, and a 40MHz operating frequency. It is housed in an 80-TQFP package with a 12x12mm footprint. The device operates over a temperature range of -40°C to 85°C (TA). Features: • 8-bit PIC18F core • 48KB Flash memory, 24K x 16 • 40MHz operating frequency • 80-TQFP package with 12x12mm footprint • Operating temperature range of -40°C to 85°C (TA) Applications: The PIC18F8527-I/PT is suitable for a wide range of applications, including automotive, industrial, consumer, and medical. It can be used for motor control, power management, data acquisition, and signal processing. It is also suitable for embedded systems, such as those used in home automation, security systems, and robotics.

The LM393DR2G is an 8-pin SOIC general purpose comparator with a maximum operating temperature of +70°C. It has a quiescent current of 2.5mA and an input bias current of 250nA. Features:-General purpose comparator -8-pin SOIC package -Maximum operating temperature of +70°C -Quiescent current of 2.5mA -Input bias current of 250nA -Packaged in Digi-ReelR Alternate Packaging Applications: The LM393DR2G is suitable for a wide range of applications, including voltage monitoring, temperature sensing, and signal conditioning. It can also be used in motor control, power supplies, and other industrial applications.

Electric motors of the MP112, MР132, MР160, MР225 type are DC motors used for the main movement of metal-cutting machines and other production mechanisms. The MР motor (112, 132, 160, 225) consists of an anchor, a stator-charged magnetic conductor, bearing shields, output device, fan assembly. All types of MР motors have a built-in tachogenerator (directly on the motor shaft), thermal protection, ventilation unit and output device. There are two types of tachogenerators in the MР series electric motors: the 4P tachogenerator (20V / 1000min-1) and the T5-10 tachogenerator (10V / 1000min-1) is a four-pole. The stator is housed in an aluminum shield that is centered in the rear engine shield and bolted. Thus the tachogenerators do not have their bearing system and rotate with the rotor of the motor. The MР motor unit consists of a three-phase asynchronous AT71A2 type motor - 0.370 kW (MР112, MР132 engine), AT80A2 - 0.750 kW (MР160, MР225 engine) and a turbine housing with a filter body.