Ups cable - Import export

The Riedel CCP-1116 is a commentary unit for two commentators with integrated intercom functionality. The device provides up to two commentary positions with high-quality mic preamps and all the intercom features known from Riedel Digital Matrix Intercom systems. Combined in one compact device and cabled via one single CAT5 or COAX cable, the CCP-1116 reduces cabling effort, set-up time and points of failure. In addition the CCP-1116 provides a clearly arranged user interface with improved functionality at the commentary position including programmable buttons for communications and GPIOs as well as remote control of the commentary panel. In the case of failure within the system - e.g. loss of the cable connection in between a CCP-1116 and the matrix – the stand- alone/emergency mode will be established without a loss of signal. ON AIR and MIC DIRECT OUT audio signals are available separately, and A/B combined at XLR outputs of the CCP-1116. AUX IN XLR inputs feed the Phones...

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

The Invertec 150S is suitable for a variety of applications and working environments. Its design was focused on providing excellent welding and starting behavior in a robust and reliable package. It is equipped with a unique set of features and capabilities to ensure perfect welding for your application. Robust and robust on the one hand, portable on the other, the Invertec 150S is light and easy to handle in any situation. Rugged Design – Unique rubber corners, metal casing and control buttons to withstand harsh environmental conditions. Premium Arch – Lincoln 's advanced technology and know-how guarantee performance every time. Power Surplus – Additional power for superior arc control. Soft and Crisp Mode – Selectable arc modes for different electrode types Self-adaptive arc force – For a stable arc with low spatter levels as standard. Integrated “Hot Start” for stable arc with lower splash level. Long cables: primary power extension cables up to 60 m.

Semi‐conducting, self‐amalgamating EPR (Ethylene Propylene Rubber) tape. Its colour is black. The product and interleave are printed with the cautionary words semi‐conducting to distinguish the product from insulating tapes. APPLICATIONS For ensuring the continuity of conductor and core screens at cable joints in a variety of polymeric and elastomeric insulated cables. For jointing power cables up to 69kV. For stress cone construction, where it provides the conducting layer. For smoothing electrical stresses on irregular shaped lugs and connectors. For smoothing electrical stresses in joints and terminations using premoulded components. For smoothing electrical stresses on overhead power lines, reducing discharges and consequent interference to local radio and telephone communications.

EPR TAPE They are used for insulation, impermeability, protection, joining or repairing applications. They have very high resistance to tear because when layers are rolled they vulcanize to form a very homogeneous mass. Optimal resistance to atmospheric agents and very good waterproofing properties. Most common applications: Repair of electrical wire cover. Airtight sealing of telecommunication cables. Insulation, waterproof and protection of electric components. Thickness: 0.3mm-1mm Weatherproof covering for thermal insulation of pipework and ventilation trunking. Premium self-amalgamating tape is also available. It is ideal for jointing and fixing of cables up to 69KV.

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

These cables are manufactured per the mechanical requirements of the USB3 Vision standard. In addition to supporting the machine vision camera market, the screw mount hardware is beneficial in many applications where standard USB connectors can become dislodged due to jostling, vibration, etc. USB 3.0 cables are up to 10 times faster than USB 2.0 - 4.8 Gbps versus 480 Mbps. The increased bandwidth substantially reduces the time required for transferring large amounts of data or video. L-com is a member of the AIA (Automated Imaging Association) trade group. Applications: Machine vision camera market Data Storage Data Acquisition Video Transfer USB3 Vision Applications

The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Designed for installation in hallways and staircases. Is used for PON networks in apartment buildings. The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

PB braid is a lightweight flexible sleeving that provides tough protection for bundles, wires, cables and flexible pipe systems. Used in automotive, rail traction and rolling stock, aerospace, military vehicles, marine and telecommunications it is suitable for use with cables up to 140mm diameter. Low smoke, low toxicity and halogen free. Operating Temperature Range from 50°C to 150°C

Cutting- and stripping machine for cables and strands up to Ø 12 mm

PG 5030 PLUS is a practical security equipment which has been widely applied for public security organs and its small tunnel design is perfect for identification of objects in letters, parcels, handbags, backpacks and so on. PG 5030 PLUS has extended protective cover and double-layer lead curtains in both tunnel ends, which can guarantee the operators' and passengers’ safety. PG 5030 PLUS has high mobility (and could be easily move to any locations which need the security inspection) through rolling casters, integrated monitor and keyboard. PG 5030 PLUS also can be operated remotely via customized keyboard line, video cable and USB cable which can up to 5 meters long.