Transducer sensors - Import export

Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).

Electric Impulse Tool with Torque Control and Angle Monitoring. The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. The angle sensor is an extremely compact (PAT) rotary encoder that detects both angle as well as direction by 1 degree, signal transmission contactless. Due to the newly developed outer rotor servo motor and the composite body, the Yokota system e-wrench has the lightest weight in its class. For cooling of the motor it is equipped with a fan that reduces motor size (and weight at the same time). For cooling of the impulse unit it is equipped with a separate fan. [...

Hybrid Technology – Smart Assembly Solutions The YOKOTA electric system wrenches with integrated torque transducer and angle sensor offer a large reduction of energy consumption, a high degree of accuracy and fantastic work efficiency. Torque transducer and angle sensor located directly at the front of the main shaft, giving the best accuracy of measurement. Faulty tightening detection with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. During the tightening process, four different variables are measured and monitored: Torque - Angle - Time - Nº. of Impulses. Torque transducer measures directly and transmits the signals contactless. Detects cross threads, double hits, contamination, etc. Special feature to prevent cross threaded tightening: reversely rotating a bolt to a preset angle at the start of tightening. Combinations of buzzers and LED (Green / Red) for operator feedback on OK / NOK tightenings. [...]

P-Sense transducers for pressure and temperature can be used both in air and in water or other fluids. Devices come with analog, digital or switching output and can be configured for absolute pressure or gauge pressure measurements. Potential fields of application are water level monitoring or fluid level measurements, e. g. in bodies of water, sewage treatment plants, storage tanks etc. The p-Sense320 probe can be fitted with an RS485 interface instead of an analog output which can optionally be connected to a computer using a RS232 adapter. Connection and data transfer to a PC/notebook can established with the Windows terminal.

Sensors for Water Quality Parameters pH/Temperature pH-Sense330 Conductivity/Temperature µS-Sense340 O2 Saturation/Temperature O2-Sense350 The Sense300 Series by Driesen+Kern GmbH consists of three models for different water quality parameters. Each sensor model also measures temperature thus ensuring precise and temperature compensated readings. Electronic circuits are entirely integrated into the stainless steel housing making it compact and entirely submersible. Of course, it can also be installed in the process assembly. The user himself can perform calibration and exchange the electrode on each model. Devices are available with analog, digital and switching output. Analog outputs are 0-1V/0-10V or 4..20mA in thre-wire or as 4-20mA current loop. Optionally, the sensors can be fitted with a relay output whose switching value will be factory-set, but can later be changed with the programming kit.

The DKP900 is a differential pressure transducer suitable for almost every HVAC application. The measurement range as well as the analog output signal can be set and adjusted on site. Therefore you will only have to keep one model type in storage for any of your applications. You can choose from two sensor ranges 0...1 000 Pa and 0...10 000Pa which are scaleable with a DIP switch. The transducer comprises a sensor with good long-term stability and an optional zero point calibration, which can be performed at the push of a button. A module for automated calibration can be built-in, too. This allows for regular calibration and makes it virtually maintenance free. The DKP900 is protected against splash water according to IP65 making it suitable for operation under rough conditions.