Torque motors - Import export

Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel drylin® E data sheet - Gearbox for stepper motors GEA-60-..._EN.pdf Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Dial Indicating Torque Screwdriver with mNm scale Tohnichi's MTD series torque screwdriver is suitable for inspection and tightening of very small screws, e.g. small torque motor shafts or the like. Torsion bar mechanism makes accurate measurement possible. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak torque indication via Memory Pointer - Accuracy and calibration compliant to ISO 6789 type I class D - Bit insert #2 Tohnichi Shipping List: - Screwdriver MTD - Calibration Certificate (ISO/JIS) - Operating Manual - Special Bits Cross #0, Slotted 0.15x1, 0.2x1.5, 0.3x2 Options: - Alternatively with english units (ozf·in) available. Metric scale (gf·cm) on request.

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

Unlock the next level of performance and innovation with the 2024 Sur-Ron Ultra Light Bee, available now for wholesale purchase. This cutting-edge electric bike is engineered for both off-road enthusiasts and urban commuters, offering a seamless blend of power, agility, and eco-friendly technology. With its lightweight frame, advanced suspension, and high-torque electric motor, the Ultra Light Bee delivers exceptional speed and handling across various terrains.

High-torque electric motors of types 2MTA, 3MTA, 4MTA, 4MTB, 5MT are designed for feeding mechanisms of CNC machine tools, robots, trans-manipulators and other mechanisms. Electric motors of the MT series have the following typical designations: - 2MTA: 2MTA-C, 2MTA-P, 2MTA-K, 2MTA-CP, 2MTA-CK; - 3MTA: 3MTA-C, 3MTA-P, 3MTA-K, 3MTA-CP, 3MTA-CK; - 4MTA: 4MTA-C, 4MTA-P, 4MTA-K, 4MTA-CP, 4MTA-CK; - 4MTB: 4MTB-C, 4MTB-P, 4MTB-K, 4MTB-CP, 4MTB-CK; - 5MT: 5MT-C, 5MT-P, 5MT-K, 5MT-CP, 5MT-CK. Decoding of type designations on the example of “4MTA-CPK” where: “4” - symbol of the moment; "M" is the engine; "T" - a series; “A” - modification by moment; "C" - electromagnetic brake; "P" - resolver with multiplier; "K" - photoelectric raster converter (pulse encoder, encoder). All electric motors of types 2MTA, 3MTA, 4MTA, 4MTB, 5MT have a degree of protection IP-44 and are equipped with a four-pole tachogenerator of direct current 4P (20V / 1000min-1).