Timing belts - Import export

Standard HTD profile with metric pitch (rounded toothing). At least one toothed belt pulley must have a rim flange. Conical hole for taper clamping bushes. The taper clamping bushes must be ordered separately and are available for various shaft diameters. Pulleys with a taper hole are statically balanced as per ISO 1940 grade G16.

The tension meter is used to perform a pretension test on commercially available belt systems quickly and easily by means of frequency measurement. Fully electronic and equipped with stateoftheart microprocessor technology, the meter enables precise adjustment of all V, toothed and flat belts that have to be tensioned in the range from 10 to 600 Hz. The measurement must never be performed while the drive is running The meter is not permitted or certified for use in potentially explosive areas.

Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides.

Belt back and belt teeth CR. Tension cords Glascord. Tooth covering mesh polyamide. Note Endless toothed belts with an arched profile as per ISO 13050 with metric pitch. The rounded shape of the tooth contour provides a particularly high degree of safety against incorrect tooth interlocking, combined with a very rounded tooth mesh. Operating noise is significantly reduced by the rounded tooth mesh. The toothed belts are robust, economical and versatile. Belt speed vmax perm. 50 m/s Transmissible power up to 8.42 kW Permissible speed up to 14000 rpm Lownoise and lowmaintenance Very good chemical resistance, particularly against oils, greases and fuels Accurate positioning and angles

Endless toothed belt with trapezoidal profile to DIN 7721 T1 with metric pitch. Ideal for drives with high belt flexibility. Permits smallest pulley diameters. The toothed belts are intended for drives where precision is a requirement, safety is important and the effects of chemicals are a concern. maintenancefree highpower transmission minimal belt extension accurate positioning and angles very good chemical resistance, especially to oils, greases and fuels extremely high abrasion resistance transmits power up to 30 kW reliable speed up to 10,000 rpm

Aluminium. Rim flanges, steel. Version Aluminium bright. Steel electro zincplated. Note Standard T profile acc. to DIN 7721 T2 with metric pitch (trapezoidal toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter.

The machine is fully automatic punching and stacking system for GSM cards (Global System for Mobile Communications). It is designed to punch the Subscriber Identity Module (SIM) and scribe a break out line according to the GSM 11.11 standard. BENEFITS Extraction of Individual cards from two removable loading magazines. The timing belt transporting system moves the cards from one workstation to another in a synchronized manner. SIM punching operation is driven by hydraulic system. Scribing of break out lines with pneumatic driven tool knife edge. Removal of waste material into an external container. Automatic stacking of the finished cards in two output removable magazines. Complete CE safety guards. The touch screen monitor makes the machine easy to operate and self diagnostic trouble shooting makes the machine user friendly.

Extraction of individual cards from two removable loading magazines The timing belt transporting system moves the cards from one workstation to another in a synchronizes manner Card thicjness measuring station ensuring only one card is fed CNC cavity high speed milling head for up to 60,000 RPM and dust extraction Hot melt tape spoller, puncher, laminating and peel off system to laminate with chip module tape Chip module punching station and pick & places system for chip module implanting in the cavities Bonding on chip into the card cavity Cooling press qtation Data input device Sorting of cards into good and reject magazines PC based control for easy operation Production capacity of up to 3,000 cards per hour Smooth, low impact operation reduces the noise level of hot melt adhesive Modular design Integrated hot melt lamination system Very stable ans consistent production process

The Dylight X-ray inspection system is a true 'Plug and Play' solution, combining all functions in one compact unit. It is perfectly suited for the inspection of small products such as snacks, energy bars and sweets. - Hygienic design, following EHEDG principles featuring sloped surfaces and curved edges allowing easy inspection and cleaning, resulting in considerable time and cost savings; - Covering belt widths from 200 mm up to 800 mm; - A wide range of standard possibilities for ensuring product integrity and quality including checking completeness, determining product mass and determining compartment mass; - 15" color touchscreen display; - Combining high detection sensitivity with low power consumption