Time temperature - Import export

Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program: Material: iglidur® A160 Low coefficient of friction Best wear-resistance Upto +100 °C Compared to similar thin plastic films, the cost-effective iglidur® A160 tape has a very high wear resistance. Material: iglidur® V400 Extremely wear resistant Highly resistant to media Upto +200 °C The extremely wear-resistant and at the same time very media- and temperature-resistant iglidur® V400 tape shows up to 10 times higher wear resistance in the test compared to special products for machine beds and the like. Lubricant- and mainteance-free Easy to cut Adherent For compact areas Typical applications:Mechanical engineering, materials handling, fixture construction, installation technology, etc. Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0.5 m/min Y = Wear/mass decrease [mg/km] A = PC | B = compound liner | C = PEEK D = PEEK mod. 1 | E = PEEK mod. 2 | F = PET G = iglidur® A160 Wear rotating against stainless steel pin (1.4305) F= 35 N, v= 0,5 m/min Y = Wear/mass decrease [mg/km] A = iglidur® V400 | B = PTFE bronze compound iglidur® Tribo-Tape A180 Delivery program: iglidur® Tribo-Tape V400 Delivery program:

iglidur® Z: The high-temperature material Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association with soft shafts, edge loads and impacts. The bearings are at the same time suitable for temperatures up to +250℃. iglidur® Z is available as cylindrical bearings and plain bearings with flange. Excellent wear resistance especially with high loads High thermic stability For extreme loads Also for high surface speeds Insensitive to edge loads

Weather station made of resistant ABS, with temperature sensor. Time function (12/24), calendar, alarm and day of the week. With base/holder and rear control buttons. Battery powered (2xAAA not included) and presented in an attractive kraft design box. Instruction manual available in English and Spanish. 2 Batteries AAA Not Included

It's an advanced version of the Teison charger with an LCD screen that shows all charging statistics. This way, we can see the current power and charging speed, voltage, temperature, used energy, time, and charging level.

Process improvements: With the various changes in standards and safe polyurethane foams are becoming increasingly difficult to implement and require a perfect mastery of the production parameters. Temperature is one of the parameter. Currently it is mainly measured and controlled at low pressure, which is not the optimal solution because the components move in after the high pressure pump and function of viscosity, flow, outside temperature, pressure and drop pressure in the circuit products can not arrive at the mixing head at a uniform temperature and even. The heat exchanger provides heat for the first time to master the temperature high pressure side to help balance and well master the temperature with high accuracy. Do not hesitate to contact us for more information .

Creating an optimal bond between a metal plate and the silicone: that was the challenge Enbi Plastics was given by Océ Technologies, a major player in printing and copying equipment. They needed a new wiper assy; a part on the print head that prevents streaks on the paper. Because this part needs to be somewhat flexible, silicone needed to be added to a small, punched metal plate, to which screw thread is welded. This construction did not allow for a mechanical bond between the metal and silicone, which meant chemical bonding was the only option. Together with the client, the mould supplier, the silicone supplier and others, we did extensive research into the best way to achieve this bond. It showed that preparing the small metal plates was the key. After several tests, we discovered the optimal way to do this. A number of factors play a role: from how to clean and sand the plate to humidity, temperature and the time in between the steps of the process. Every detail counts!

Micro Sensor for Humidity and Temperature The Micro Sensor DKRF410 is available as one of two models which are especially suitable for humidity and temperature measurements in areas difficult to access such as insulation, concrete walls, floor screed, product and packaging tests. The DKRF410 probe has a range of 0...100% RH and offers an accuracy of up to 2% RH. At the same time temperature measurements with a range of -40...+80°C can be undertaken. Two separate analogue outputs each provide a linear signal f 0...1V / 0...5V or 0...10V. A passive output signal for temperature (PT100) can also be provided. If you require a 4-20 mA output signal the DKRF 473 industrial transmitter can be used with the -XS and -XXS probe. The DKRF410 is also available with digital outputs (RS232, USB, RS485).

For a few years now seamless polyimide belts have been used in toner fusing for desktop printers and multifunctional printers. The most important advantages compared to using traditional steel or aluminum cores are: significantly shorter times lead to reach run temperatures major improvements in energy efficiency weight-saving and lower logistic costs flexible belts enable higher print speed and resolutions by allowing a wider fusing nip for both b&amp;w and color applications For these applications KB RollerTech developed a special coating process and produces seamless belts under clean room conditions. Different thermal and electrical properties of these belts can be precisely adjusted by adding special fillers. Today, the following dimensions are possible: Diameter: 20 - 310 mm Length: < 700 mm Wall thickness: 25 - 150 µm For the subsequent coating with anti-adhesive materials two alternative processes are used: Spray coatings with fluoro-polymers and subsequent sintering Coat

The XILINX XC9536XL-10PCG44C is a Complex Programmable Logic Device (CPLD) with 10.0ns access time and a temperature range of 0°C to 70°C (TA). It is a 44-PLCC (16.59x16.59) package and is in system programmable with a minimum of 10K program/erase cycles. Features: • 10.0ns access time • 0°C to 70°C (TA) temperature range • 44-PLCC (16.59x16.59) package • In system programmable with a minimum of 10K program/erase cycles Applications: The XILINX XC9536XL-10PCG44C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense

The 24LC256-I/SN is a Serial 2-Wire I2C Memory IC from Microchip. It has an access time of 5 ms and a maximum operating temperature of +85 C. It is available in an SOIC-Narrow-8 package and has a unit weight of 0.006596 oz. Product Details Description: The 24LC256-I/SN is a Serial 2-Wire I2C Memory IC from Microchip. It has an access time of 5 ms and a maximum operating temperature of +85 C. It is available in an SOIC-Narrow-8 package and has a unit weight of 0.006596 oz. Features:• Interface-Type: Serial 2-Wire I2C • Mounting-Style: SMD/SMT • Access-Time: 5 ms • Maximum Operating Temperature: + 85 C • Supply-Voltage-Min: 2.5 V • Package-Case: SOIC-Narrow-8 • Supply-Current-Max: 3 mA • Supply-Voltage-Max: 5.5 V • Operating-Supply-Current: 3 mA Applications: The 24LC256-I/SN is suitable for applications such as data logging, data storage, and memory expansion. It can also be used in embedded systems, industrial automation, and consumer electronics.

The Resin Domino Sign Dryer oven allows you to have a neat worktop at the right height. Above all, it aims to perfectly control the temperature and humidity which are essential for the production of resin faces. Equipped with an automatic device, the Resin Domino Sign Dryer oven manages the temperature and the time of use with an audible alarm in order to respect the different cycles of the process.

The RH1 air thermo- hygrometer is an easy-to-use device for the rapid determination of the relative and absolute air humidity as the dew point temperature of the surrounding air. In addition, by storing the device at wood or paper, the equilibrium moisture content (EMC) and the water content in the material can be determined. At the same time the current temperature - optionally in °C or °F - is displayed by each measurement. The measuring range of the RH1 thermo- hygrometer is between 0 and 100% relative humidity at a resolution of 0.1%. The calibrated measurement range, in which the measurement is within the defined tolerance limits, ranges from 10% to 90% of the relative humidity, where the accuracy of ±1.5% of relative humidity (at 25 ° C) is reached. The temperature measurement range is from -10 to +60 ° C or 14 to 140 ° F, at a resolution of 0.1 ° C. The accuracy is ± 0.4 ° C.